无机/有机纳米复合材料的研究进展*

分析总结了聚合物基无机纳米复合材料的各种制备方法、性质及其应用, 并对今后的发展作了展望。     

Doping silver nanoparticles in AOT lyotropic lamellar phases

The organic lyotropic liquid crystal with long-range structural order is used as template to assemble inorganic/organic hybrid by doping pre-fabricated Ag nanoparticles. The lamellar hybrid with both hydrophilic and hydrophobic particles doped simultaneously is realized for the first time. The change of template structure after doping and the stability origin of dual-doped system are characterized by small angle X-ray scattering and polarized optical microscopy. Results show that the interaction and space matching between surfactant bilayers and doped particles are key factors to obtain stable hybrid.     

银纳米粒子在云母表面的二维组装及其表面增强拉曼效应

随着纳米技术的迅速发展 ,利用共价或非共价键作用将金属纳米粒子组装到固体基片上 ,因其方法简单、重复性好而成为研究热点 .目前 ,人们已经成功地利用带有— SH[1,2 ] ,—CN,— NH2 [3 ] 等基团的单层或多层膜作为偶联剂将 Au和 Ag等金属纳米粒子固定在玻璃、石英、硅、金等固体基片上 .但在许多情况下 ,偶联剂却成为一种干扰物质 .云母是一种重要的电子工业材料 ,并具有廉价、较易获得新鲜表面等特点 ,研究金属纳米粒子在云母表面的组装和排列无疑具有重要意义 .但是 ,迄今为止 ,在表面没有偶联剂修饰的条件下 ,以云母为基底的金属纳…     

二氧化钛纳米粒子和纳米管的合成、表征及对硝基苯的光催化性能研究

采用水热合成法, 通过改变反应条件, 控制反应参数, 成功地合成了粒径可控的球形TiO2纳米粒子和长径比、比表面积均比较大的纳米管. 用XRD, TEM, SAED和BET等手段对产物进行了表征. 为了测试产物的光催化性能, 以高浓度的硝基苯(NB)溶液为模拟水样, 进行了一系列提高降解效率的优化实验和光催化降解的对比实验. 通过对硝基苯溶液初始浓度、TiO2加入量和降解体系pH值等条件的考察, 得出硝基苯溶液的质量浓度为300 mg/L, TiO2的加入量为0.4 g/L, 体系的pH值为6~7时, 降解效果最好; 通过对比实验发现, 由于纳米管的大比表面积, 使得其光催化性能明显优于球形纳米粒子, 3 h后的降解率达到90%以上, 3.5 h左右硝基苯几乎被完全降解.     

硫化镉/二氧化硅复合材料的合成

结合亲核取代反应与硅氧烷水解和硅羟基缩合反应,制备了羧酸镉/二氧化硅复合材料。通过硫化反应,实现了立方结构和六方结构硫化镉纳米粒子在复合材料中的原位制备。复合材料中硫化镉纳米粒子的发射峰位在617 nm,属于红色荧光(三元色之一)。硫化镉/二氧化硅复合材料在光学器件方面具有潜在的应用前景。     

SiO2/Co3O4核壳催化剂对AP热分解的催化性能研究

采用改良的Stöber法制备粒径约为200 nm的单分散球形SiO₂颗粒,以此为内核,分别通过液相沉淀法和尿素均匀沉淀法制备包覆形式不同的新型SiO₂/Co₃O₄核壳式纳米催化剂。采用X-射线衍射分析(XRD)、透射电子显微镜(TEM)、红外光谱分析(IR)、拉曼光谱分析(Raman)、BET比表面积测试等手段对产物进行表征,利用差式扫描量热仪(DSC)考察SiO₂/Co₃O₄复合物对高氯酸铵(AP)热分解反应的催化作用,探讨不同包覆形式对其催化活性的影响。结果表明,两种方法制备得到的SiO₂/Co₃O₄复合物分别为层包覆和粒子包覆,比表面积大,具有明显的核壳结构,且粒子包覆形式的SiO₂/Co₃O₄对AP热分解反应的催化效果最好,使AP的高温分解温度降低了110 ℃,放热量增加了662 J·g^-1。     

纳米金颗粒增强信号的电化学生物传感器用于谷胱甘肽和半胱氨酸的检测

构建了一种高灵敏检测谷胱甘肽(GSH)和半胱氨酸(Cys)的新型电化学生物传感器. 先将富含T碱基的DNA1和DNA2探针分别修饰在金电极和纳米金颗粒(AuNPs)上, 再加入Hg²⁺, 通过形成T-Hg²⁺-T结构使AuNPs结合到金电极表面. 当加入GSH(或Cys)后, GSH(或Cys)可以竞争结合T-Hg²⁺-T结构中的Hg²⁺, 使AuNPs离开电极表面. 由于AuNPs上修饰的DNA探针能够静电吸附大量电活性物质六氨合钌(RuHex), 因此该过程可引起计时电量信号的显著变化, 据此实现了GSH(或Cys)的高灵敏检测. 该传感器的检出限达10 pmol/L, 比荧光法或比色法降低了2~3个数量级. 实验结果表明, 该传感器具有较好的选择性.     

高分散在氮掺杂碳纳米管表面铂纳米粒子的高效甲醇电氧化性能

以氮掺杂碳纳米管（NCNT）为载体,利用掺杂氮原子的锚定作用,通过微波辅助乙二醇还原法方便地将Pt纳米粒子高分散地固载于NCNT表面,制得了Pt/NCNT系列催化剂,对催化剂制备规律、电催化甲醇氧化反应（MOR）性能及构效关系开展了系统深入的研究。结果表明,随Pt负载量在18.2%~58.7%（w/w,下同）范围增加,Pt纳米粒子的粒径在2.2~3.7 nm范围相应地逐渐增大。单位质量催化剂的MOR催化活性先增加后急剧减小,在负载量为47.8%时达到最大。Pt的质量比活性在中等负载量（27.6%~47.8%）区间出现高值平台。该变化规律源于Pt纳米粒子的MOR催化活性在3 nm前后的明显差异,即<3 nm时活性差,>3 nm时活性优异。高负载量（58.7%）时活性的急剧下降源于Pt纳米粒子因团聚引起的Pt利用率的降低。     

Atomic‐Level Alloying and De‐alloying in Doped Gold Nanoparticles

Atomically precise alloying and de‐alloying processes for the formation of Ag–Au and Cu–Au nanoparticles of 25‐metal‐atom composition (referred to as Ag_xAu_25?x(SR)₁₈ and Cu_xAu_25?x(SR)₁₈, in which R=CH₂CH₂Ph) are reported. The identities of the particles were determined by matrix‐assisted laser desorption ionization mass spectroscopy (MALDI‐MS). Their structures were probed by fragmentation analysis in MALDI‐MS and comparison with the icosahedral structure of the homogold Au₂₅(SR)₁₈ nanoparticles (an icosahedral Au₁₃ core protected by a shell of Au₁₂(SR)₁₈). The Cu and Ag atoms were found to preferentially occupy the 13‐atom icosahedral sites, instead of the exterior shell. The number of Ag atoms in Ag_xAu_25?x(SR)₁₈ (x=0–8) was dependent on the molar ratio of Ag^I/Au^III precursors in the synthesis, whereas the number of Cu atoms in Cu_xAu_25?x(SR)₁₈ (x=0–4) was independent of the molar ratio of Cu^II/Au^III precursors applied. Interestingly, the Cu_xAu_25?x(SR)₁₈ nanoparticles show a spontaneous de‐alloying process over time, and the initially formed Cu_xAu_25?x(SR)₁₈ nanoparticles were converted to pure Au₂₅(SR)₁₈. This de‐alloying process was not observed in the case of alloyed Ag_xAu_25?x(SR)₁₈ nanoparticles. This contrast can be attributed to the stability difference between Cu_xAu_25?x(SR)₁₈ and Ag_xAu_25?x(SR)₁₈ nanoparticles. These alloyed nanoparticles are promising candidates for applications such as catalysis.     

Synthesis,characterization, and application of silver nanoparticle‐thiophenol nanocomposite film on the glassy carbon surface

In this study, 4‐thiophenol modified glassy carbon electrode was prepared by the reduction of 4‐diazothiophenol tetrafluoroborate salt. Silver nanoparticles were attached to the thiophenol modified surface to prepare a thiophenol‐silver nanoparticle composite film. 4‐Aminothiopenol molecules were deposited by self‐assembling technique to form multi‐layered nanofilms of TP/SNP/PhNH₂ on glassy carbon substrate. These surfaces were characterized by cyclic voltammetry, electrochemical impedance spectroscopy, X‐ray photoelectron spectroscopy, reflectance‐absorption infrared spectroscopy, and ellipsometry at each multilayer film growth process. Atomic force microscopic images of GC/TP/SNP/PhNH₂ surfaces were also acquired. The characterization methods show that the amine group containing surface permits the subsequent modification by a variety of coupling reactions for the immobilization of more complex systems. An application of the electrode modification for the determination of uric acid with a significantly lower detection limit is described. Copyright © 2013 John Wiley & Sons, Ltd.