石墨炉原子吸收光谱法测定血铅的干扰校正

研究了用石墨炉原子吸收光谱法测定血铅的干扰校正方法。通过对测定过程中的干扰研究，建立了一种数学校正干扰的标准加入法基体匹配工作曲线。用本法分析健康儿童血铅及脐带血铅，线性范围为０￣９０ｎｇ／Ｌ，相关系数为０．９９９７，灵敏度为８．６ｐｇ／１％信号，检出限为４．８ｐｇ，与一般标准加入法工作曲线相比较，测定血铅线性斜率大，灵敏度高，准确性好。     

Self-assembled structures of alkanethiols on gold-coated cantilever tips and substrates for atomic force microscopy: Molecular organisation and conditions for reproducible deposition

Measurements of surface-liquid interactions (contact-angle goniometry) and tip-surface adhesion forces (atomic force microscopy) combined with infrared spectroscopic studies have been used to investigate surface-preparation and solution-deposition conditions for the reproducible formation of self-assembled molecular structures on gold-coated tips and substrates for atomic force microscopy. Preliminary data show that surface-saturated self-assembled monolayers form reproducibly on prolonged (>20 h) exposure of gold-coated glass substrates to ethanolic solutions of ω-functionalised alkanethiols in the concentration range 80-160 mmol dm⁻³. The data also show that exposure for 16 h to alkanethiol concentrations in the range 160-240 mmol dm⁻³ promote bilayer formation whereas concentrations of 240-320 mmol dm⁻³ result in the deposition of multilayers, the average orientation of which is parallel to that of the first molecular layer; the use of parent 1-undecanethiol solutions at concentrations of 1-80 mmol dm⁻³ results in incomplete monolayer coverage.     

Spectral characterization of EUV radiation emitted from a laser-irradiated gas puff target

A laser-plasma EUV source is described, which is going to be utilized for characterization of EUV optical components and sensoric devices in the wavelength region from 11 to 13 nm. EUV radiation is generated by focusing a Nd:YAG laser into a double stream gas puff target. By the use of different target gases, broadband as well as narrow-band EUV radiation can be obtained. The emission characteristics of the radiation is monitored by the help of different diagnostic tools including a pinhole camera, an EUV spectrometer, and various EUV photodiodes, either directly or after reflection from multilayer mirrors. Theoretical calculations of collision-induced energy transfer are given in order to explain the observed high degree of electronic excitation in the utilized target gases.     

Low-temperature, solution processing of TiO2 thin films and fabrication of multilayer dielectric optical elements

High-quality TiO₂ thin films have been deposited from aqueous titanium-peroxo solutions via spin coating. The effects of precursor solution pH on the crystallization behavior, morphology, density, and refractive index of the films are reported. From X-ray diffraction measurements, the amorphous as-deposited films are found to crystallize in the anatase phase at 250 °C. Surface and cross-section SEM images reveal that films deposited from an acidic precursor are more uniform and denser than those deposited from a basic precursor. X-ray reflectivity measurements show that films with smooth surfaces and high densities (up to 87% of single-crystal anatase) can be produced at temperatures as low as 300 °C. Measured densities are consistent with high refractive indices at 633 nm of 2.24 and 2.11 for films derived from acidic and basic precursors, respectively. The uniformity and dense nature of the films have allowed fabrication of multilayer dielectric optical elements with thermal processing at only 300 °C. The distributed Bragg reflector with four bilayers exhibits a reflectance of 92% and a stop band width of 150 nm. The optical microcavity has a quality factor of 20. The optical properties of all elements agree well with theoretical models, indicating good optical quality. Use of the precursor chemistry for direct photopatterning of TiO₂ films without a polymer resist is also demonstrated.     

A Comparison of Electron Transfer Kinetics of Three Common Carbon Electrode Surfaces in Acetonitrile and in Room Temperature Ionic Liquid 1‐Butyl‐3‐Methylimidiazonium Hexafluorophosphate: Correlation to Surface Structure and the Limit of the Diffusion Domain Approximation

We report the comparison of electron transfer kinetic parameters of the ferrocene redox couple in both acetonitrile and in room temperature ionic liquid (RTIL) 1‐butyl‐3‐methylimidiazonium hexafluorophosphate ([C₄mim] [PF₆]), using edge plane pyrolytic graphite (EPPG), basal plane pyrolytic graphite (BPPG) and glassy carbon (GC) electrodes. Each electrode surface was characterized using SEM and AFM and the surface morphology was analyzed in terms of surface heterogeneity including the distribution of edge plane defects. The experimental data were modeled using both one and two dimensional simulations to correlate the electron transfer parameters obtained with the different surface structure of each electrode. Furthermore, we show that the diffusion domain approximation (commonly used to accurately simulate electron transfer kinetics at graphitic surfaces) breaks down when a BPPG electrode is used in RTIL and demonstrate the near impossibility of assigning rate constant to the basal plane surface.     

Voltammetry of Benzo[a]pyrene in Aqueous and Nonaqueous Media: Adsorptive Stripping Voltammetric Determination at Pencil Graphite Electrode

A detailed study of the electrochemical oxidation of Benzo[a]pyrene (BaP) at the glassy carbon and pencil graphite electrodes was carried out in aqueous and nonaqueous media. Using square‐wave stripping mode, the compound yielded a well‐defined voltammetric response at pencil graphite electrode in acetate buffer, pH 4.8 at +1.13 V (vs. Ag/AgCl) (a preconcentration step being carried out at a fixed potential of +0.70 V for 180 s). The process could be used to determine BaP concentrations in the range 0.25–1.25 μM, with a detection limit of 0.027 μM (6.82 μg L^?1). The applicability to assay of spiked human urine samples was also illustrated.     

Electrochemical Characterization of Myoglobin‐Polylysine Films at a Temperature Range of 6–80 °C

This work demonstrated for the first time that myoglobin cross‐linked in polylysine films is electrochemically active at 6 °C. At 6 °C, these protein films exhibited reversible reduction/oxidation peaks which are characteristic of Fe^III/Fe^II redox couple. The estimated current function densities (J=1.6×10^?4 C/V cm²), surface concentrations (Γ_T=0.10 nmol/cm²) and standard electron transfer constant (k_s=13.86 s^?1) at 6 °C for the data taken at a scan rate of 0.1 V/s were similar to those which were obtained at 10, 15 and 23 °C. Basically, this study shows a possible electrocatalytic application of these myoglobin/polylysine films, for example in low temperature sensing applications.     

Mucin layers and multilayers — Physicochemical properties and applications

The present review summarizes recent, and important previous, findings on properties of mucin layers and multilayers and ways to tailor their properties. Specifically, progress has been made in understanding the effects of mucin type, preparations, ambient conditions and surface properties on adsorption and on mixed layer assembly including multilayers. Apart from structural features the stability, lubrication and biological functions of such layers are addressed.     

Investigation of resonant properties of metal core–shell nanoparticles using T-matrix calculations

Using T-matrix method, plasmon resonance properties of metal core–shell nanoparticles are systematically investigated. It is shown that dielectric/metal core–shell structure may be excited stronger at resonance than metal/dielectric and hetero-metal ones, but the resonance states are extremely sensible to the layers thickness. For three-layer nanospheres, resonance properties will be dominated by a sub-10 nm silver outermost shell, while only weakened by a silica one. Finally, tiny eccentric distance between the centers of core and shell in eccentric two-layer nanoparticles may fundamentally change the resonance mode of nanoparticles, and results in higher local electrical field enhancement than concentric nanospheres.