Novel aromatic polyimides derived from benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA)

Benzofuro[2,3-b]benzofuran-2,3,8,9-tetracarboxylic dianhydride (BBTDA) is introduced as a monomer for the synthesis of a series of novel polyimides with enhanced high thermal stability. Polyimides derived from BBTDA and aromatic diamines showed high glass transition (T_g>296 °C) and degradation (T₅>455 °C) temperatures, and were soluble in organic solvents (i.e. N-methyl pyrrolidone (NMP), N,N^′-dimethylformamide (DMF), N,N^′-dimethylacetamide (DMAc)). The polymerization yielded high-molecular-weight polyimides with inherent viscosities ranging from 1.75 to 2.14 dl/g. The polymers were characterized by IR and elemental analysis.     

Effect of growth conditions on the rheological properties and chemical composition ofVolcaniella eurihalina exopolysaccharide

The exopolysaccharide produced byVolcaniella eurihalina, an halophilic eubacterium, under different environmental and nutritional conditions, is studied.V. eurihalina synthesizes an acidic heteropolysaccharide, composed by rhamnose, glucose, and mannose, as well as amino sugars, uronic acids, and acetyl and sulphate residues. This composition varies depending on the nutrients of culture medium. Viscosity and pseudoplasticity of the polymer solutions are also influenced by the nutritional conditions in which the microorganism was grown.     

Bacterial response to eukaryotic cells. Analysis of differentially expressed proteins using nano liquid chromatography-electrospray ionization tandem mass spectrometry

Host-bacteria interactions have mostly been investigated with regard to the host response or to activities of pathogenic bacteria. In contrast, we aim to identify reactions of non-pathogenic bacteria that result from their contact with host cells of the gastrointestinal tract. In a proteomic approach, the response of non-pathogenic human Escherichia coli bacteria on gut epithelial cells (rat IEC-6) was investigated in an in vitro co-culture model. For this purpose, a sensitive analytical procedure was developed based on the identification of two-dimensional polyacrylamide gel electrophoresis separated proteins by online nanoLC-electrospray ionization MS/MS using a quadrupole time-of-flight tandem mass spectrometer for accurate mass determination. We demonstrate here the efficiency of this technique by the identification of a total of 43 differentially expressed proteins, out of which 25 were up-regulated and 18 were down-regulated. They represent a wide range of molecular weight and different metabolic and physiological functions.     

COPOLYMERS OF 2-ACRYLAMIDO-2-METHYL-1-PROPANESULFONIC ACID/MALEIC ACID： SYNTHESIS, CHARACTERIZATION AND ANTIMICROBIAL ACTIVITY

2-Acrylamido-2-methy1-1-propanesulfonic acid(AMPS),and maleic acid(MA)copolymerized with different feed ratios using N,N-dimethylformamide as a solvent and benzoyl peroxide(Bz_2O_2)as an initiator at 70℃.Structure and composition of copolymers for a wide range of monomer feed were determined by elemental analysis(content of N for AMPS-units).Monomer reactivity ratios for AMPS(M_1)-MA(M_2)pair were determined by the application of conventional linearization methods such as Fineman-Ross(F-R),Kelen-Tüd(?)s(KT)and Extended Kelen-Tüds(EKT)and a nonlinear error invariable model method using a computer program RREVM.The characterizations were done by Fourier transform infrared spectroscopy(FTIR),differential scanning calorimetry(DSC)thermal gravimetry analysis(TGA),and and X-ray diffraction.The antimicrobial effects of polymers were also tested on various bacteria,and yeast.     

Multiple-locus variable number tandem repeats analysis for genetic fingerprinting of pathogenic bacteria

DNA fingerprinting has attracted considerable interest as means for identifying, tracing and preventing the dissemination of infectious agents. Various methods have been developed for typing of pathogenic bacteria, which differ in discriminative power, reproducibility and ease of interpretation. During recent years a typing method, which uses the information provided by whole genome sequencing of bacterial species, has gained increased attention. Short sequence repeat (SSR) motifs are known to undergo frequent variation in the number of repeated units through cellular mechanisms most commonly active during chromosome replication. A class of SSRs, named variable number of tandem repeats (VNTRs), has proven to be a suitable target for assessing genetic polymorphisms within bacterial species. This review attempts to give an overview of bacterial agents where VNTR-based typing, or multiple-locus variant-repeat analysis (MLVA) has been developed for typing purposes, together with addressing advantages and drawbacks associated with the use of tandem repeated DNA motifs as targets for bacterial typing and identification.     

Evaluation of epifluorescence image analysis of biofilm growth on stainless steel surfaces

Biofilm growth of Bacillus subtilis, Pseudomonas fragi, Pediococcus inopinatus and Listeria monocytogenes was studied on stainless steel surfaces at room and low temperatures to evaluate the results of traditional hygiene measures. The results were compared with those of image analysis of stainless steel surfaces in an epifluorescence microscope. Statistical analyses were carried out to determine the variations between the conventional cultivation swab method, the glycocalyx amount obtained using swabbing, and the values of the areas of the biofilm, slime and cells. As a general rule, old biofilms showed total counts at approximately the same levels as the young biofilm. The results showed that temperature affected the results for all strains except B. subtilis. The strains of Pe. inopinatus and Ps. fragi showed increased attachment at 6°C and L. monocytogenes at 25°C. The biofilm slime was more easily detached than the cells. The results indicated that the traditional swab method is not reliable for the measurement of biofilm formation on surfaces.     

Biofuel cell anode based on the Gluconobacter oxydans bacteria cells and 2,6-dichlorophenolindophenol as an electron transport mediator

A basic scheme of the use of the Gluconobacter oxydans bacteria cells as a biocatalyst at an anode of a biofuel cell with air-based cathode is raised up. The anode and cathode of the cell are made of graphite; 2,6-dichlorophenolindophenol serves as an electron transport mediator; and glucose is the substrate to be oxidized. The open-circuit voltage is 55 mV, for the bacteria cell, the mediator, and glucose concentrations of 3 mg/ml (raw weight), 34 mM, and 10 mM, respectively. The voltage and current of the biofuel cell loaded with an external resistance of 10 kohm are 5.6 mV and 0.56 mA. The cell’s internal resistance is 88 kohm.     

Anaerobic reduction of a sulfonated azo dye, Congo Red, by sulfate-reducing bacteria

The capacity for anaerobic decolorization of a sulfonated azo dye, Congo Red, by a strain of a sulfate-reducing bacterium was evaluated. After optimizing the growth rate of the bacteria on a simple carbon source and terminal electron acceptor pair, lactate and sulfate, respectively, the effect of the dye concentration on their growth rate was analyzed. The decolorization rate was affected by the dye concentration in the growth medium. The azo-bond cleavage mechanism of reductive decolorization with the formation of benzidine was consistent with the results, as this metabolite was identified by high-performance liquid chromatography. Several fractions of the culture medium, including lysed cell extracts, were examined for the capacity to reduce the azo dye. This reduction capacity was found in the culture medium in which the cells had previously grown. The results showed that the mechanism of reductive decolorization of this sulfonated azo dye was extracellular and nonenzymatic, consistent with the production of sulfide anion by the microorganisms while growing on lactate and sulfate. The sulfide anions were the cause of the reduction leading to the disappearance of color in the medium. To increase the rate of decolorization, the presence of ferrous ion was also necessary together with the lactate and sulfate substrates.     

Analysis of sorption and bioavailability of different species of mercury on model soil components using XAS techniques and sensor bacteria

The present work studies the adsorption behaviour of mercury species on different soil components (montmorillonite, kaolinite and humic acid) spiked with CH₃HgCl and CH₃HgOH at different pH values, by using XAS techniques and bacterial mercury sensors in order to evaluate the availability of methyl mercury on soil components. The study details and discusses different aspects of the adsorption process, including sample preparation (with analysis of adsorbed methyl mercury by ICP-OES), the various adsorption conditions, and the characterization of spiked samples by XAS techniques performed at two synchrotron facilities (ESRF in Grenoble, France and HASYLAB in Hamburg, Germany), as well as bioavailability studies using mercury-specific sensor bacteria. Results show that XAS is a valuable qualitative technique that can be used to identify the bonding character of the Hg in mercury environment. The amount of methyl in mercury adsorbed to montmorillonite was pH-dependent while for all soil components studied, the bond character was not affected by pH. On the other hand, clays exhibited more ionic bonding character than humic acids did with methyl mercury. This interaction has a higher covalent character and so it is more stable for CH₃HgOH than for CH₃HgCl, due to the higher reactivity of the hydroxyl group arising from the possible formation of hydrogen bonds.The bioavailability of methyl mercury adsorbed to montmorillonite, kaolinite and humic acids was measured using recombinant luminescent sensor bacterium Escherichia coli MC1061 (pmerBR_BSluc). In case of contact exposure (suspension assays), the results showed that the bioavailability was higher than it was for exposure to particle-free extracts prepared from these suspensions. The highest bioavailability of methyl mercury was found in suspensions of montmorillonite (about 50% of the total amount), while the bioavailabilities of kaolinite and humic acids were five times lower (about 10%). The behaviour of methyl mercury in the presence of montmorillonite could be explained by the more ionic bonding character of this system, in contrast to the more covalent bonding character observed for humic acids. Thus, XAS techniques seem to provide promising tools for investigating the mechanisms behind the observed bioavailabilities of metals in various environmental matrices, an important topic in environmental toxicology.     

Structural characterization of gentiobiosyl diglycerides fromBacillus pumilus associated with ascidiaHalocynthia aurantium

A mixture of 1(3),2-di-O-acyl-3(1)-O-β-gentiobiosylglycerols was isolated from a sea isolate ofBacillus pumilus. The components of the mixture were structurally characterized by mass spectrometry and¹H and¹³C NMR spectroscopy data for the native compounds and their derivatives. The predominant component contains two C₁₅ acyl groups, while the second component contains C₁₅ and C₁₇ fatty acids. Six minor components differ in residues of fatty acids and/or their combinations. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 166–170, January, 2000.