金在碳糊电极上的静电吸附及溶出伏安测定

阳极溶出伏安法测定金具有灵敏度高,操作简便等优点,但共存金属往往干扰测定,影响该方法的应用。为减少干扰,已有阴极溶出伏安法的报道。 作者曾采用修饰了三烷基叔胺的碳糊电极,通过开路萃取富集和介质交换,测定矿样中的金,并且发现,碳糊电极本身能在正电位下直接富集微量金,在阴极溶出伏安法中显示了     

Highly visible-light luminescence properties of the carboxyl-functionalized short and ultrashort MWNTs

Luminescence of the short multiwalled carbon nanotubes (MWNTs) conjugated with carboxylic acid groups has been studied. The results show that the carboxyl-functionalized short MWNTs could emit luminescence and the emission peak appears at 500 nm with a corresponding optimal excitation wavelength centering at 310 nm. When the short MWNTs are filtered through 0.15 μm polytetrafluoroethylene (PTFE) membrane, the ultrashort MWNTs are obtained from the filtrate. An interesting feature for the ultrashort MWNTs is that the emission intensity is strengthened and the peak is slightly blue shifted to 460 nm. This result indicates that the luminescence properties of MWNTs are strongly affected by the tube length. After chemical oxidization cutting, defects and carboxylic acid groups at the tube end and/or sidewall can be produced; the more shorten of MWNTs, the better dispersion and carboxylic passivation of the nanotubes, and the more intense luminescence emissions. The broad emissions are logically attributed to the trapping of excitation energy by defect sites in the carboxyl-functionalized nanotube structure.     

负载咖啡因-活性炭新吸附材料对钼(VI)的吸附行为的研究

以生物碱（咖啡因）为衍生化试剂，用浸渍法使其负载于活性炭（ＡＣ）上，制成一种新的金属阴离子吸附材料———负载咖啡因－活性炭（ＣＡＣ）。用ＩＣＰ－ＡＥＳ研究了该吸附材料对金属阴离子［Ｍｏ７Ｏ２４］６－的吸附性能；考察了其化学稳定性；还研究了不同浓度硫酸和氨水对待测物吸附率和解脱率的影响及共存离子的干扰影响。     

连翘苷荧光传感器的构建和应用

以柠檬酸为碳源,三聚氰胺和甲醛为双掺杂剂合成碳量子点,并对合成的量子点进行透射电镜(TEM)、傅里叶变换红外光谱(FTIR)、X射线粉末衍射(XRD)、紫外吸收光谱(UV)和荧光光谱(RF)表征,结果表明该量子点粒径均一,发光稳定,适合用作荧光探针。优化了碳量子点含量、pH、反应时间以及温度等影响因素,结果显示检测波长λmax=425 nm时,连翘苷在0.008~0.030 mg/mL范围内有良好的线性关系,1/△f=0.00005(1/c)+0.0003(R2=0.9948),加标回收率在92.5%~106.3%之间,RSD<5%,且干扰物质、反应时间、温度等因素在一定范围内对实验结果的测定无影响。该方法可用于药剂中连翘苷含量的测定。     

超临界二氧化碳-高分子化学中的绿色介质

介绍了超临界二氧化碳的特点，综述了近期以超临界二氧化碳为溶剂的高分子聚合和高分子化学反应及其应用前景。指出超临界CO2在聚合反应中能作为传统有机溶剂的替代溶剂。     

Electrochemical reduction and voltammetric determination of metronidazole at a nanomaterial thin film coated glassy carbon electrode

Simple and sensitive electrochemical method for the determination of metronidazole, based on a nanostructured film coated glassy carbon electrode (GCE), is described. Multi-walled carbon nanotubes (MWNT) was dispersed into water in the presence of a hydrophobic surfactant to give very stable and homogeneous MWNT suspension, and a MWNT-film coated GCE was achieved via evaporating solvent. Metronidazole yields a well-defined reduction peak whose potential is −0.71 V at the MWNT-film coated GCE in pH 9.0 Britton-Robinson buffer. Compared with bare GCE, the MWNT-film modified GCE significantly enhances the reduction peak current of metronidazole. All the experimental parameters were optimized for the determination of metronidazole. The detection limit is 6×10⁻⁹ mol/l at 2 min accumulation. This method has been successfully used to determine metronidazole in the drugs. Furthermore, results obtained by the proposed method have been compared with spectrophotometric method.     

Application of thermal analysis to carbon black-elastomer systems

In this study a relationship between the surface and textural properties of carbon blacks and the gasification process induced thermally in air is noted. A temperature jump method was used to follow the gasification in air and to establish the relevant Arrhenius parameters. This can be associated with the activity of ‘basal’ plane carbon atoms as well as ‘edge’ carbon atoms at the surface. This is based on a model of carbon black structure consisting of the irregular packing of small graphite carbon structures. The carbon black surface was measured using a single measurement of adsorption based essentially on the BET volumetric method. The carbon black surface had a rate of oxidation per unit are which clearly indicated that the lower area carbon blacks had a predominately active area of ‘edge’ atoms at the surface while the surface of the higher area carbon blacks had a predominate amount of ‘basal’ plane graphite carbon atoms.     

Carbon nanotube assisted synthesis of CeO2 nanotubes

CeO₂ nanotubes have been synthesized facilely using carbon nanotubes (CNTs) as templates by a liquid phase deposition method. The properties of the CeO₂ nanotubes were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD), X-ray photoelectron spectrum (XPS) as well as thermogravimetry and differential thermal analysis (TG-DTA). The obtained CeO₂ nanotubes with a polycrystalline face-centered cubic phase have a uniform diameter ranging from 40 to 50 nm. The CeO₂ nanotubes are composed of many tiny interconnected nanocrystallites of about 10 nm in size. The pretreatment of CNTs and calcination temperature were confirmed to be the crucial factors determining the formation of CeO₂ nanotubes. A possible formation mechanism has been suggested to explain the formation of CeO₂ nanotubes.     

Activation of Carbon Dioxide and Synthesis of Propylene Carbonate

Cycloaddition of carbon dioxdie and propylene oxide to propylene carbonate catalyzed by tetra-tert-butyl metal phthalocyanine in the presence of tributylamine(TBA) shows higher yield than catalyzed by unsubstituted metal phthalocyanine.Comparing different catalysts of diverse metals,(t-Bu)4PcMg is more active than (t-Bu)PcFe ,But(t-Bu)4PcCo and (t-Bu)4PcNi only have low catalytic activities towards the reaction.Moreover,the yield will increase as the temperature increases.