Pyrolysis study of fluorinated sol-gel silica

Fluorinated silica gels at various fluorine content were prepared via sol-gel by hydrolysis of 3,3,3-trifluoropropyltrimethoxysilane and tetraethoxysilane mixtures. The gels, of nominal stoichiometry Si(CH₂CH₂CF₃)_XO_(2-X/2)(X=0.1-1), were characterized by FT-IR, X-ray photoelectron spectroscopy (XPS) and N₂ adsorption analysis. The thermal stability of the fluorinated samples was investigated by coupling thermogravimetric measurements with mass spectrometric and gas chromatographic analyses of the evolved gaseous species. The chemical reactions occurring in the gel matrices during heating were siloxane chain rearrangements involving condensation between residual hydroxyl and ethoxyl groups in the 100-350°C temperature range, whereas the thermal decomposition of the fluoroalkyl groups were observed at higher temperatures (450-600°C). The release of the fluoroalkyl moieties also involved C-F/Si-O bond exchanges inside the siloxane chains, with gas-phase evolution of different fluorinated silicon units. This revised version was published online in July 2006 with corrections to the Cover Date.     

Studies in werner clathrates. Part 2. Structures of bis (isothiocyanato) tetra (4-phenylpyridine) nickel (II)· 4-dimethylsulphoxide,bis (isothiocyanato) tetra (3-methylpyridine) nickel (II)· chloroform and bis (isothiocyanato) tetra (3,5-dimethylpyridine) nickel (II)

The structures of Ni(NCS)₂(4-PhPy)₄·4DMSO and Ni(NCS)₂(3-MePy)₄·CHCl₃ have been elucidated. Movement of guest molecules through channels in the host structure was simulated by potential energy calculations. Ni(NCS)₂(3,5-diMePy)₄ does not form inclusion compounds. An intra-molecular potential energy study shows that theortho-hydrogens on the 3,5-dimethylpyridine ligands control the conformation of the molecule. The same result is obtained with the 4-methylpyridine ligand, which suggests that the extent of rotation of substituted pyridines about the Ni–N bounds is not a factor governing clathrate formation. Supplementary Data relating to this article are deposited with the British Library as Supplementary Publication No. SUP 82030 (43 pages).     

Inorganic speciation of As(III, V), Se(IV, VI) and Sb(III, V) in natural water with GF-AAS using solid phase extraction technology

The paper presents a procedure for the multi-element inorganic speciation of As(III, V), Se(IV, VI) and Sb(III, V) in natural water with GF-AAS using solid phase extraction technology. Total As(III, V), Se(IV, VI) and Sb(III, V) were determined according to the following procedure: titanium dioxide (TiO₂) was used to adsorb inorganic species of As, Se and Sb in sample solution; after filtration, the solid phase was prepared to be slurry for determination. For As(III), Se(IV) and Sb(III), their inorganic species were coprecipitated with Pb-PDC, dissolved in dilute nitric acid, and then determined. The concentrations of As(V), Se(VI) and Sb(V) can be calculated by the difference of the concentrations obtained by the above determinations. For the determination of As(III), Se(IV) and Sb(III), palladium was chosen as a modifier and pyrolysis temperature was 800 °C. Optimum conditions for the coprecipitation were listed for 100 ml of sample solution: pH 3.0, 15 min of stirring time, 40.0 μg l⁻¹ Pb(NO₃)₂ and 150.0 μg l⁻¹ APDC. The proposed method was applied to the determination of trace amounts of As(III, V), Se(IV, VI) and Sb(III, V) in river water and seawater.     

Topologisch und elektronisch bemerkenswerte „reduzierte”︁ Cluster des Typs [V18O42(X)]n− (X = SO4, VO4) mit Td-Symmetrie und davon abgeleitete Cluster [V(18–p)As2pO42(X)]m− (X = SO3, SO4, H2O; p = 3, 4)

Reduced Clusters with Remarkable Topological and Electronic Properties of the Type of [V₁₈O₄₂(X)]^n? (X = SO₄, VO₄) with T_d-Symmetry and Related Clusters [V_(18—p)As_2pO₄₂(X)]^m? (X = SO₃, SO₄, H₂O; p = 3, 4) The novel cluster-compounds Na₆[V₁₈O₄₂H₉(VO₄)] · 21 H₂O, (NH₄)₈[V₁₈O₄₂(SO₄)] · 25 H₂O, K₆[V₁₅As₆O₄₂(H₂O)] · 8 H₂O, (NH₄)₆[V₁₄As₈O₄₂(SO₃)], (NH₄)₆[V₁₄As₈O₄₂(SO₄)] and [N(CH3)₃]₄[₄V₁₄As₈0₄₂(H₂0)] were prepared and characterized by IR- and UV/Vis/NIR-spectroscopy, magnetic measurements and complete crystal structure analysis. For structural data see Inhaltsübersicht. Topological relations to the rhombicuboctahedron spanned by 24 0-atoms of the genuine hypothetical a-Keggin ion, at which the square planes are capped by V?O or As₂O groups, are discussed. Of particular interest are the ?extended”? Keggin ions [V₁₈O₄₂(X)]ⁿ- (X = SO₄ VO₄), (formaly derived from the hypothetical genuine a-Keggin ion by addition of six V?O groups) which have quite different electron populations in spite of the same structure of their cluster shells.     

A sol-gel route for the development of rare-earth aluminum borate nanopowders and transparent thin films

A new sol-gel route was applied to obtain Y_0.9Er_0.1Al₃(BO₃)₄ crystalline powders and amorphous thin films by using Al(acac)₃, B(OPrⁱ)₃, Y(NO₃)₃·6H₂O, and Er(NO₃)₃·5H₂O as starting materials dissolved in propionic acid and ethyl alcohol mixtures. Our study shows that propionic acid acts as good chelant agent for yttrium and erbium ions while ethyl alcohol allows to dissolve Al(acac)₃. This process makes the resulting sols very stable to obtain homogeneous gels and transparent amorphous thin films. In addition, the propionic acid prevents the sol precipitation, making easy porous- and crack-free thin film depositions. Chemical reactions involved in the complexation were discussed. As-prepared powders and films are amorphous and present a good thermal stability due to their high glass transition (746 °C) and crystallization temperatures (830 °C). This new sol-gel route showed to be adequate to obtain dense and crack-free thin films free of organic and hydroxyl groups that can be considered as promising materials to be used in integrated optical systems.     

Practical and quality-control aspects of multi-element analysis with quadrupole ICP–MS with special attention to urine and whole blood

Two screening methods were developed for rapid analysis of a great number of urine and blood samples within the framework of an exposure check of the population after a firework explosion. A total of 56 elements was measured including major elements. Sample preparation consisted of simple dilution. Extensive quality controls were applied including element addition and the use of certified reference materials. Relevant results at levels similar to those found in the literature were obtained for Co, Ni, Cu, Zn, Sr, Cd, Sn, Sb, Ba, Tl, and Pb in urine and for the same elements except Ni, Sn, Sb, and Ba in blood. However, quadrupole ICP–MS has limitations, mainly related to spectral interferences, for the analysis of urine and blood, and these cause higher detection limits. The general aspects discussed in the paper give it wider applicability than just for analysis of blood and urine—it can for example be used in environmental analysis.     

Thermal behavior of Cu(II)-, Cd(II)-, and Hg(II)-exchanged montmorillonite complexedwith cysteine

The thermal behavior of montmorillonite and organically modified montmorillonite, both treated with heavy metal cations [Cu(II), Cd(II) and Hg(II)], was characterized via thermal analyses (TG, DTG and DTA) combined with evolved species gas mass spectrometry (MS-EGA), and X-ray diffraction at in situ controlled temperature (HTXRD). The reactions involving Cu(II)- and Cd(II)-montmorillonite samples are mostly related to H₂O and OH loss, unlike Hg(II)-montmorillonite, where effects associated to Hg(II) loss are also present. Finally reactions related to dehydration, dehydroxylation and to organic matter decomposition can be observed in montmorillonite samples treated with cysteine.     

Energetic and topological analyses of the oxidation reaction between Mo(n) (n = 1, 2) and N2O

The interaction between molybdenum, atom, and dimer, with nitrous oxide has been investigated using density functional theory. The analysis of the potential energy surfaces for both reactions has revealed that a single molybdenum atom can activate the N--O bond of N2O requiring a small activation energy. However, the presence of several intersystem crossings between three different spin states, namely, septet, quintet and triplet states, seems to be the major constraint to the Mo + N2O reaction. Contrarily, the low-lying excited states (triplet and quintet) do not participate in the reaction between the molybdenum dimer and N2O. The latter reaction fully evolves on the singlet spin surface. Three different regions have been distinguished along the pathway: formation of an adduct complex, formation of an inserted compound, and the N2 detachment. The connection between the two first regions has been characterized by the formation of a special complex in which the N--O bond is so weakened that it could be considered as a first step in the insertion process. It has been shown that the topological changes along the pathways provide a clear explanation for the geometrical changes that occur along the reaction pathway. In summary, the detachment of the N2 molecule is found to be kinetically an effective process for both reactions, owing to the high exothermicity and consequently to the high internal energy of the insertion intermediates. However, in the case of Mo atom, the reaction should be a slow process due to the presence of spin-forbidden transitions. These results fully agree with previous experimental works.     

Synthesis of furan dimer‐based polyamides with a high melting point

Polyamide composed of furan dimer, which is prepared from biomass‐derived organic molecule 2‐furfural, is synthesized. The reaction of 2,2′‐furan dimer 5,5′‐dicarbonyl chloride with several 1,ω‐diamines was carried out with a solution or interfacial polycondensation leading to the corresponding polyamide. Measurement of the melting point was performed resulting to exhibit a higher temperature compared with the related polyamide bearing a single furan ring composed of furan‐2,5‐dicarboxylic acid (FDCA). Thermal analyses (TG–DTA) also indicated higher temperatures of decomposition than those of FDCA‐derived polyamide. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 1516–1519     

GasChromatography of Amino Acids as their N-Trifluoroacetyl Methyl Esters and Comparison with the Ion-exchange Method in Maize and Oats

A method for the preparation of N-trifluoroacetyl methyl esters of amino acids has been developed, permitting the separation and determination of 20 amino acids by temperature-programmed gas chromatography on two columns. The method was applied to the analysis of the amino acids in hydrolyzed maize and in hydrolyzed oats, where a direct comparison was made with the ion-exchange method.