A novel reaction cascade leading to a spontaneous intramolecular dipolar cycloaddition through simultaneous generation of 1,3-dipole and dipolarophile

Ornithine methyl ester reacts with aromatic aldehydes to generate bis-Schiff bases, which depending on the structure of the aromatic aldehyde, further undergo an intramolecular cycloaddition through the transient formation of a reactive 1,3-dipole.     

Expanding the scope of the asymmetric anti-aldol addition of chiral N-amino cyclic carbamate hydrazones

An asymmetric anti-aldol addition process of ketone-derived donors that is not limited by the structure of the ketone is described. This is achieved by merging the enantioselective α,α-bisalkylation of N-amino cyclic carbamate (ACC) hydrazones with the asymmetric anti-aldol addition of ACC hydrazones. The products of this process are obtained with essentially perfect stereoselectivity. Using this procedure it is possible to gain access to ketone-based anti-aldol addition products that are inaccessible in a controlled sense via direct aldol methods.     

Thiamine hydrochloride as a promoter for the efficient and green synthesis of 12-aryl-8,9,10,12 tetrahydrobenzoxanthene-11-one derivatives in aqueous micellar medium

An environmentally benign, three-component, one-pot integrated chemical process has been developed for the synthesis of 12-aryl-8,9,10,12-tetrahydrobenzoxanthene-11-one by nucleophilic addition reaction between aldehyde and β-naphthol followed by Michael addition of dimedone, catalyzed by thiamine hydrochloride in aqueous micellar medium with excellent yield. Simple reaction conditions, no requirement of chromatographic separation, short reaction time, ease of isolation, use of inexpensive, easily recoverable and reusable catalyst makes this protocol very interesting from an economic and environmental perspective.     

Functionalization of Multi Carbon Nanotubes with 1,2‐Naphthoquinone‐4‐sulfonic Acid Sodium: A Novel Sulphydryl Compounds Sensor Based on Functionalized Carbon Nanotube Film Using Michael Addition

The functionalized multi‐wall carbon nanotube with 1,2‐naphthoquinone‐4‐sulfonic acid sodium (Nq‐MWNT) was fabricated by a simple and low‐cost method. Techniques of scanning electron microscope (SEM) with energy dispersive X‐ray (EDX) analysis, fourier transform infrared spectroscopy (FT‐IR), ultraviolet visible spectroscopy (UV‐vis) and cyclic voltammetry (CV) were used to characterize the property of the Nq‐MWNT. The results showed that the MWNT with high functionalization of Nq can be obtained using this simple method. The Nq‐MWNT modified carbon paste electrode (Nq‐MWNT/CPE) was fabricated by drop‐casting technique. The resulted modified electrode was tested successfully to detection D‐penicillamine (D‐PA) and captopril (CAP) in an aqueous solution. It is found that D‐PA and CAP participate in Michael addition reaction with Nq on MWNT to form the corresponding thioquinone derivative. The reoxidation of adducts at a potential of less positive than D‐PA and CAP at the surface of the bare CPE leads to an increase in the oxidative current, which is proportional to the concentration of D‐PA and CAP. The catalytic response showed a wide linear range (3‐200 μM and 1‐130 μM for D‐PA and CAP, respectively) as well as its experimental limit of detection can be achieved 0.8 μM, and 0.4 μM for D‐PA and CAP, respectively. The modified electrode for D‐PA and CAP determination is of the property of simple preparation, good stability and high sensitivity. Furthermore, the fabricated electrode was used to determine the content of D‐PA and CAP in the tablet, suggesting the good accuracy of the method.     

Direct Conjugate Addition of Alkynes with α,β‐Unsaturated Carbonyl Compounds Catalyzed by NCN‐Pincer Ru Complexes

NCN‐pincer Ru‐complexes containing bis(oxazolinyl)phenyl ligands serve as suitable catalysts in the direct conjugate additions of α,β‐unsaturated carbonyl compounds, including ketones, esters, and amides, as well as vinylphosphonates, giving various β‐alkynyl carbonyl and phosphonate compounds. A bis(oxazolinyl)phenyl (phebox)–Ru complex also catalyzes the asymmetric conjugate addition of an alkyne with a β‐substituted, α,β‐unsaturated ketone to produce a chiral β‐alkynyl ketone.     

Diastereo‐ and Regioselective Addition of Thioamide Dianions to Imines and Aziridines: Synthesis of N‐Thioacyl‐1,2‐diamines and N‐Thioacyl‐1,3‐diamines

Addition reactions of thioamide dianions that were derived from N‐arylmethyl thioamides to imines and aziridines were carried out. The reactions of imines gave the addition products of N‐thioacyl‐1,2‐diamines in a highly diastereoselective manner in good‐to‐excellent yields. The diastereomeric purity of these N‐thioacyl‐1,2‐diamines could be enriched by simple recrystallization. The reduction of N‐thioacyl‐1,2‐diamines with LiAlH₄ gave their corresponding 1,2‐diamines in moderate‐to‐good yields with retention of their stereochemistry. The oxidative‐desulfurization/cyclization of an N‐thioacyl‐1,2‐diamine in CuCl₂/O₂ and I₂/pyridine systems gave the cyclized product in moderate yield and the trans isomer was obtained as the sole product. On the other hand, a similar cyclization reaction with antiformin (aq. NaClO) as an oxidant gave the cis isomer as the major product. The reactions of N‐tosylaziridines gave the addition products of N‐thioacyl‐1,3‐diamines with low diastereoselectivity but high regioselectivity and in good‐to‐excellent yields. The use of AlMe₃ as an additive improved the efficiency and regioselectivity of the reaction. The stereochemistry of the obtained products was determined by X‐ray diffraction.     

The role of benzoic acid in proline‐catalyzed asymmetric michael addition: A density functional theory study

In asymmetric Michael addition between ketones and nitroolefins catalyzed by L ‐proline, we observed that it was benzoic acid or its derivatives rather than other proton acid that could accelerate the reaction greatly, and different benzoic acid derivatives brought different yields. To explain the experimental phenomena, a density functional theory study was performed to elucidate the mechanism of proline‐catalyzed asymmetric Michael addition with benzoic acid. The results of the theoretical calculation at the level of B3LYP/6‐311+G(2df,p)//B3LYP/6‐31G(d) demonstrated that benzoic acid played two major roles in the formation of nitroalkane: assisting proton transfer and activating the nitro group. In the stage of enamine formation from imine, the energy profiles of benzoic acid derivatives were also calculated to investigate the reasons why different benzoic acid derivatives caused different yields. The results demonstrated that the pK_a value was the major factor for p‐substituted benzoic acid derivatives to improve the yields, whereas for m/o‐substituted benzoic acid derivatives, both pK_a value and electronic and steric effects could significantly increase the yields. The calculated results would be very helpful for understanding the reaction mechanism of Michael addition and provide some insights into the selection of efficient additives for similar experiments. © 2012 Wiley Periodicals, Inc.     

High‐molecular‐weight symmetrical multiblock copolymers: Synthesis by RAFT polymerization and characterization

High‐molecular‐weight (MW) symmetrical multiblock copolymers, based on the hydrophobic monomers styrene (Sty) and methyl methacrylate (MMA), and the more polar monomer, 2‐vinyl pyridine (2VPy), were prepared using stepwise reversible addition‐fragmentation chain transfer polymerization. All copolymers shared a common poly(ethylene glycol) (PEG) midblock, introduced as a bifunctional macromolecular chain transfer agent. In total, five ABA triblock copolymers, five ABCBA pentablock terpolymers, and two ABCDCBA heptablock quaterpolymers (comprising four different monomer types) were synthesized. The MWs of the multiblock polymers were determined using gel permeation chromatography (GPC) and proton nuclear magnetic resonance (¹H NMR) spectroscopy, with the latter values being closer to the theoretically expected, whereas GPC MW distributions were relatively narrow, broadening with the number of blocks. The compositions of the synthesized polymers, as determined by ¹H NMR spectroscopy, were also close to the expected values. Finally, films cast from chloroform solutions of the pentablock terpolymers P2VPy‐b‐PSty‐b‐PEG‐b‐PSty‐b‐P2VPy, PSty‐b‐PMMA‐b‐PEG‐b‐PMMA‐b‐PSty, and P2VPy‐b‐PMMA‐b‐PEG‐b‐PMMA‐b‐P2VPy examined using transmission electron microscopy exhibited PSty and PMMA cylinders (first two) and lamellae (third terpolymer). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4957–4965     

2‐Hydroxy‐1,2,3,6‐tetrahydro‐azulen‐6‐carboxylic Acid Ethyl Ester—A Novel Precursor for a New Class of Liquid Crystalline Materials

A novel approach for the syntheses of carbene adduct 4 is reported. A ring-enlargement strategy was employed for the synthesis of precursors 5 and 6 and established the mechanism of the formation of azulene derivative 6. Synthesis of target precursor 13, a novel precursor for the synthesis of new mesogenic materials, and its various halogenated derivatives (14–16) was carried out.