非视线紫外通信大气传输特性的蒙特卡罗模拟

基于蒙特卡罗方法建立了紫外光非视线传输多次散射模型,利用单次散射近似法和实验方法验证了模型的有效性,并利用该模型完成了非视线紫外光通信大气传输特性的模拟.模拟时光波长取紫外光通信的最佳工作波段(250 nm附近),分析了不同传输距离下能见度、风、雨、雾等参量对系统能量透射比的影响.结果指出,系统能量透射比随传输距离增大而剧烈减小,在天气较差传输条件下能量衰减得更快;风力大小的变化对通信系统影响不大.较近距离通信传输时(一两百米),通信系统受天气条件的影响较小.     

氮化硼纳米管阵列储氢的计算机模拟

采用巨正则蒙特卡罗方法模拟常温、中等压强下单壁氮化硼纳米管阵列的物理吸附储氢,重点研究压强、纳米管阵列的管径和管间距对单壁氮化硼纳米管阵列物理吸附储氢的影响.计算结果表明,氮化硼纳米管阵列的储氢性能明显优于碳纳米管阵列,在常温和中等压强下的物理吸附储氢量(质量百分数)可以达到和超过美国能源部提出的商业标准.并给出相应的理论解释.     

Chiral invariant phase space event generator

The Geant4 CHIPS model simulates both decay and nuclear capture of negative muons. In hadron level models the muon is captured by a proton, p(μ,ν_μ)n , and the neutron transfers to the nucleus only 5MeV, which is not enough to split a nucleon from the nucleus, while the measured spectra of emitted nucleons reach 80MeV. In CHIPS, which considers asymptotically free quark-partons, the muon can be captured by a quark, u(μ,ν_μ)d , and transfers 52MeV to the nucleus. This capture mechanism fits the main part of the nucleon spectra, while the high-energy part of the spectra is not fitted. A precise fit of the high-energy part of the nucleon spectra can be made if the muon decay μ → dˉν_μ is taken into account.     

环境气体种类对激光烧蚀粒子速度劈裂的影响

采用蒙特-卡罗(Monte Carlo)方法, 模拟了激光烧蚀粒子输运动力学过程, 在环境气体压强为100 Pa的情况下, 研究了环境气体种类(He, Ne, Ar和假想气体等)对烧蚀粒子速度劈裂的影响. 研究结果表明, 在四种环境气体中传输的烧蚀粒子均出现了速度劈裂现象, 形成速度劈裂所需时间按He, Ne, 假想气体和Ar的次序减小. 还研究了环境气体分子的质量和半径对烧蚀粒子速度劈裂的影响, 形成速度劈裂所需时间随环境气体分子半径(或质量)增大而减小. 在假想气体中, 两速度峰强度相等时的强度最小. 结合欠阻尼振荡模型和惯性流体模型, 对劈裂的形成时间进行了解释. 所得结论可为进一步定量研究纳米晶粒生长机理提供基础.     

复杂混合溶液成分高光谱分析的可行性

采用高光谱技术对复杂混合溶液进行检测分析,同时利用被测物质的吸光度和散射特性信息以提高光谱的信噪比。实验设计了高光谱采集装置,采集生物组织模拟液(Intralipid-10%)的漫反射高光谱图像,并用Monte Carlo方法和漫射近似理论对其进行了正向和反向推导,获得了632nm波长下,Intralipid-10%吸收系数为0.002 0cm-1,与标准参数相对误差为11.1%;约化散射系数为63.35cm-1,与标准参数相对误差为6.49%,基本符合标准参数的误差范围,验证了该高光谱检测系统的准确性。还利用该高光谱系统对不同厂家出品的牛奶、果汁等样本进行了高光谱采集,得到不同样本间差异较传统二维光谱更为明显的结果,充分证明了高光谱方法在复杂混合溶液成分分析中具有很强的可行性。     

Three-dimensional Monte Carlo simulation of bulk fin field effect transistor

In this paper,we investigate the performance of the bulk fin field effect transistor(FinFET) through a threedimensional(3D) full band Monte Carlo simulator with quantum correction.Several scattering mechanisms,such as the acoustic and optical phonon scattering,the ionized impurity scattering,the impact ionization scattering and the surface roughness scattering are considered in our simulator.The effects of the substrate bias and the surface roughness scattering near the Si/SiO2 interface on the performance of bulk FinFET are mainly discussed in our work.Our results show that the on-current of bulk FinFET is sensitive to the surface roughness and that we can reduce the substrate leakage current by modulating the substrate bias voltage.     

高光谱成像仪等效焦面装调模组设计

高光谱成像仪CCD组件在装调时,纵向需要满足20 μm焦深要求,横向需要实现光谱维、空间维的对准。为了避免检测时对昂贵的CCD频繁安装、拆除,设计了一种等效焦面装调模组。等效模组按照CCD组件的实测尺寸精密制造,提供了可供显微镜观察的模拟光谱像。通过测量实际光谱像和模拟光谱像的位置差别能够获取修磨垫的修整量,并实现光谱像和CCD像元的横向对准。试验表明,存在工具显微镜测量误差、修磨垫加工误差、互换性误差时,光谱像面各处离焦量均小于焦深。试验中仅用3次迭代即达到MTF为0.3的要求,提高了装调效率和操作安全性。     

Spin frustration-related behavior of mixed spin diamond chain

The magnetization of mixed spin-1/2, 1 Ising diamond chain with antiferromagnetic spin exchange interaction has been investigated by using the Monte Carlo simulation. Magnetization behaviors with different antiferromagnetic interactions are simulated under magnetic field at low temperature. The behaviors are studied in two different cases. In one case the absolute value of the interaction between two spin-1/2 atoms is the largest and in the other case it is not the largest. Multiple plateaus of magnetization M, such as plateaus at M=±1, M=0 and M=±0.566 are obtained. The plateaus at M=±0.566 correspond to two metastable states. The M=0 plateau may disappear at some specific values of spin exchange interactions. The spin configurations were checked when the plateaus appear. The dimmer and trimmer states are found.     

Total reaction and fusion cross sections at sub- and near-barrier energies for the system 7Li + 28Si

Fusion cross sections are extracted for the ⁷Li$ + $²⁸Si system, via reaction cross section and transfer measurements at sub- and near-barrier energies ( E _lab = 5.7 to 14MeV). The energy evolution of transfer to reaction cross section ratios is determined with the aid of CDCC calculations, which subsequently allows the deduction of fusion cross sections at sub- and near-barrier energies. It is shown that fusion can be well represented in a BPM context. Fusion cross sections are compared for the systems ⁷Li$ + $²⁸Si and ⁶Li$ + $²⁸Si, the latter studied previously, and are found to exhibit different strengths. Last, the direct channels determined at 13MeV, are found to be dominated by a 2n -transfer mechanism.     

Monte Carlo simulation of glandular dose in a dedicated breast CT system

A dedicated breast CT system (DBCT) is a new method for breast cancer detection proposed in recent years. In this paper, the glandular dose in the DBCT is simulated using the Monte Carlo method. The phantom shape is half ellipsoid, and a series of phantoms with different sizes, shapes and compositions were constructed. In order to optimize the spectra, monoenergy X-ray beams of 5-80 keV were used in simulation. The dose distribution of a breast phantom was studied: a higher energy beam generated more uniform distribution, and the outer parts got more dose than the inner parts. For polyenergtic spectra, four spectra of Al filters with different thicknesses were simulated, and the polyenergtic glandular dose was calculated as a spectral weighted combination of the monoenergetic dose.