超薄油膜润滑的分子动力学模拟Ⅰ．刚性分子模型

分子量级超薄油膜的润滑特性与流体润滑及边界润滑的都有所不同，而且在超薄油膜中也同样存在着润滑剂的流动。因此，利用分子动力学方法模拟了超薄油膜中的压力流动，模拟中采用了刚性分子流体模型，重点研究固体壁面对流动的影响，结果表明，当油膜厚度远比流体分子“直径”大时，模拟所得速度剖面和流量均与流体力学的理论值基本一致；随着油膜厚度逐渐变薄，压力流动或动压流因受到固体壁面的阻碍作用而不断减小；当油膜厚度减小到几个分子直径量级时，两固体壁面之间的流体分子发生固化或晶体化，由此而导致压力流动消失。这可能是流体动力润滑向边界润滑转化的机理之一。由这些研究结果可见，分子动力学模拟在薄膜润滑研究中具有广阔的应用前景。     

一种容积法测小流量研究

针对高压汽水两相流实验中小液量测量困难这一问题，运用重力压差主要由液相密度决定的原理，提出了由圆管内重力压差变化线性分求流量的方法，实验表明这一方法线性度很好，本文对这一方法进行了理论分析，得到了计算修正公式，同时评估了计算带来的误差。     

硫含量对GCr15轴承钢摩擦学性能影响的试验研究

冶炼了3炉不同硫含量的GCr15轴承钢,采用MM-200、MPX-200和Falex摩擦磨损试验机对其进行了不同条件下的摩擦磨损试验,研究了硫含量对GCr15轴承钢摩擦学性能的影响规律。结果表明,随着硫含量的增加,GCr15轴承钢的摩擦系数降低,耐磨性能和抗咬合性能提高。作者根据金相分析、电子探针线扫描和电解分离法的测试结果指出,硫在GCr15轴承钢中主要是以化合态的形式存在,并对其作用机理进行了初步探讨。     

竖直椭圆管内降膜孤立波的实验研究

作者在用摄影法进行坚直椭圆管内降膜波动实验研究时证实,当Re<400时,降膜内确实存在孤立波;R_(?)>400时,存在随机波.降膜中的孤立波是由小扰动发展而成的.实验结果与理论预测的孤立波特性吻合较好.     

溅射MOS_2膜和PTFE膜在边界润滑条件下的摩擦学性能之研究

本文对溅射二硫化钼(MoS_2)膜和聚四氟乙烯(PTFE)膜在边界润滑条件下的摩擦学性能进行了研究。结果表明,与未镀膜的轴承钢相比,这两种固体润滑膜都具有较好的抗粘着性和减摩性,以及对硬质颗粒良好的嵌入性,但在同样的负荷条件下,PTFE膜的磨损比MoS_2膜的轻微。     

聚四氟乙烯对齿轮润滑成膜膏润滑性能的影响

作者以聚四氟乙烯(PTFE)为固体润滑剂填料对GM型齿轮润滑成膜膏进行了改进,并且研制出了两种新的成膜膏系列产品。经四球试验机、动静摩擦系数精密测定仪和SRV试验机评价的结果表明,添加PTFE的GM-2型成膜膏的承载能力和减磨性能都明显地比未添加的好;以PTFE为主要固体润滑剂填料的GM-3和MFC-1型两种润滑成膜膏也都具有良好的润滑性能,其中后者的性能与含PTFE的GM-2型成膜膏的接近。通过对摩擦轨迹的电子探针检测发现,PTFE在摩擦过程中于摩擦表面形成了转移膜,因而改善了润滑成膜膏的摩擦学性能。     

Microscale heat transfer in an evaporating moving extended meniscus

The evaporative heat flux distribution in the leading edge region of a moving evaporating thin liquid film of pentane on quartz was obtained by analyzing the measured thickness profile for thicknesses, δ < 2 μm. The profiles in a constrained vapor bubble were obtained using image analyzing interferometry. Although the evaporating meniscus appeared to be benign (i.e., without additional observed motion beyond creeping), high heat fluxes were obtained. Significantly higher heat fluxes are possible. The interfacial slope, curvature, interfacial shear stress, and liquid pressure profiles were also obtained. Results obtained using a continuum model were consistent with those obtained using a control volume model. The measured pressure field profile of the isothermal extended meniscus agreed with the constant pressure field predicted by the augmented Young–Laplace model. For the non-isothermal case, measured thickness gradients lead to disjoining pressure and curvature gradients for fluid flow and evaporation. The experimental results demonstrate that disjoining pressure at the contact line controls fluid flow within an evaporating completely wetting thin curved film and is, therefore, a useful boundary condition. However, in small interfacial systems, non-idealities can have a dramatic effect.     

A new solution for the rotation-driven spreading of a thin fluid film

Lie groups are used to solve the equation governing the flow of a thin liquid film subject to centrifugal spreading and viscous resistance. A new implicit solution is found. It is shown how this relates to the previous known solutions for the spreading of an initially flat film, the steady state and a separable solution. New permissible forms for the film evolution are also studied, including solutions exhibiting finite time blow-up. Near the contact line, where the film height tends to zero, an approximate explicit solution is obtained which may be used to describe a film with any size contact angle.     

往复摩擦下热压镍－二硫化钼复合材料的自润滑性能及其耐磨机理研究

对于含ＭｏＳ２的复合材料在单向滑动摩擦条件下的实用性能，人们已经进行了比较多的研究，然而好多摩擦部件在工程实际中经受的却都是往复摩擦。为了探明热压Ｎｉ－ＭｏＳ２复合材料的自润滑性能及其耐磨机理，在往复摩擦条件下研究了这种材料盘表面和偶件ＧＣｒ１５钢球表面之ＭｏＳ２膜的形成过程与形貌特征，并且利用扫描电子显微镜等观察分析了ＭＯＳ２膜的磨损表面形貌及其微区成分。结果表明，在给定的往复摩擦条件下，对偶双方表面都形成了具有层状结构的ＭｏＳ２润滑膜，这种膜是通过疲劳剥落、转移、粘附与叠压等方式所形成；ＭｏＳ２含量对Ｎｉ－ＭｏＳ２复合材料自润滑性能的影响，主要取决于它是否能够在对偶双方表面形成分布均匀而稳定的润滑膜，含６０％（ｗｔ）ＭｏＳ２的复合材料的自润滑性能最好；Ｎｉ－ＭｏＳ２复合材料的自润滑性是通过其表面ＭｏＳ２膜的连续生成与疲劳剥落，并在偶件表面形成转移膜，使复合材料与金属间的摩擦变成复合材料表面ＭｏＳ２膜与偶件表面ＭｏＳ２膜之间的摩擦所实现。由此可见，Ｎｉ－ＭＯＳ２复合材料是适合在往复摩擦运动场合应用的一种性能良好的自润滑复合材料。     

An investigation into the spreading of a thin liquid drop under gravity on a slowly rotating disk

The axisymmetric spreading of a thin liquid drop under the influence of gravity and rotation is investigated. The effects of the Coriolis force and surface tension are ignored. The Lie group method is used to analyse the non-linear diffusion-convection equation modelling the spreading of the liquid drop under gravity and rotation. A stationary group invariant solution is obtained. The case when rotation is small is considered next. A straightforward perturbation approach is used to determine the effects of the small rotation on the solution given for spreading under gravity only. Over a short period of time no real difference is observed between the approximate solution and the solution for spreading under gravity only. After a long period of time, the approximate solution tends toward a dewetting solution. We find that the approximate solution is valid only in the interval t∈[0,t∗), where t∗ is the time when dewetting takes place. An approximation to t∗ is obtained.