Electrodeposition of PdAu Alloy Nanoparticles on Ionic Liquid Functionalized Graphene Film for the Voltammetric Determination of Oxalic Acid

An ionic liquid functionalized graphene film was prepared and PdAu nanoparticles (NPs) were electrodeposited on it. The PdAu NPs were characterized by various methods and they showed the features of alloys. In 0.2 M H₂SO₄ solution, oxalic acid (OA) exhibited a sensitive anodic peak at the resulting electrode at about 1.1 V (vs. SCE), and the peak current was linear to OA concentration in the range of 5–100 µM with a sensitivity of 45.5 µA/mM. The detection limit was 2.7 µM (S/N=3). The electrode was successfully applied to the determination of OA in real sample.     

FeCl3-Doped Polyaniline Nanoparticles as Reusable Heterogeneous Catalyst for the Synthesis of 2-Substituted Benzimidazoles

FeCl₃-doped polyaniline nanoparticles efficiently catalyze the synthesis of 2-substituted benzimidazoles by the reaction of aldehydes with o-phenylenediamine. Synthesis and characterization of the catalyst are described, and the obtained results confirms good dispersion of the FeCl₃ on the polyaniline. Simple workup, mild reaction conditions, low cost, easy separation, and reusability of the catalyst are some advantages of this method.     

Influence of caged bicyclic phosphate and CaCO3 nanoparticles on char-forming property of PU rigid foams

Char-forming property of PU rigid foams, which can be assessed by char residue (%) when PU is burned at certain temperature, was studied by TG and DTG. The results showed that pure PU rigid foam had low char residue of only 17%, while 33% of char residue was achieved when PU rigid foam was modified by adding 8 wt% of 1-oxo-2,6,7-trioxa-1-phosphabicyclo[2,2,2] octane (PEPA), which is a caged bicyclic phosphate. The experiment results of FTIR and XPS showed that the PEPA modified PU rigid foam could be dehydrogenated and dehydrated at temperature between 380 and 450 °C, resulting in the increase of char residue of PU rigid foam. Further study also revealed that the addition of CaCO₃ nanoparticles could enhance the char stability when the PEPA modified PU rigid foam was being burned. The mechanism was investigated and it was found that the enhanced char stability could be attributed to the limited permeation of oxygen caused by the formation of calcium phosphate and calcium pyrophosphate by the reaction of PEPA and CaCO₃ at high temperature, which were covered on or buried in the char layer.     

THE USE OF CARBOXYMETHYL ETHOXYLATE SURFACTANT TO DISSOLVE VITAMIN K1 AND TO OBTAIN LOW INTERFACIAL TENSION AND STABLE EMULSION SYSTEMS

Abstract

The presence of vitamin K₁ in human body is important for preventing the hemorrhagic disease. Due to its very long side chain, vitamin K₁ is highly insoluble in water. We have successfully dissolve a substantial amount of vitamin K₁ in solutions of a commercial surfactant containing carboxymethyl ethoxylates (Hüls B433) and obtained low interfacial tension (IFT) and stable emulsion systems. This paper will present the details of these experiments. The solubilization of vitamin K₁ was estimated from UV absorption. The IFT values were measured by using a spinning drop apparatus and all particle sizes were determined by using laser light scattering. By using the Hüls B433 surfactant and an optimum amount of CaCl₂, we can dissolve vitamin K₁ in water and obtain low IFT systems in the order of 10^?2 dyne/cm. The emulsions obtained in these systems are stable and contain droplet sizes below 65 nm. The dissolution of vitamin K₁ and the IFT behavior in these systems follow the rules for crude oil and prefer larger surfactant micelles.     

Study and Modeling of Metal Oxide Solubilization in (w/o) Microemulsions

Water-in-oil (w/o) microemulsions are very appealing reaction media due to their ability to provide huge surface of contact between water-soluble and oil-soluble reactants. Their application as reaction media, including the preparation of nanoparticles, is, however, limited to water soluble precursors. In this study, we present a first step scheme in a two-step process for the preparation of metal oxide nanoparticles starting from their water-insoluble metal oxide bulk powder. This step involves solubilizing the metal oxide in the water pools of the microemulsion with the aid of a solubilizing agent. The variables affecting the solubilizing capacity of iron and copper oxides, as examples of important metal oxides, in single HCl-containing AOT/water/isooctane microemulsions were investigated. The effect of the following variables on the solubilization capacity is reported, namely, mixing time, surfactant concentration, water to surfactant mole ratio (R), and the nominal concentration of HCl in the water pool. At 300-rpm, time-invariant concentration of the metals in the microemulsions was achieved in about 6 hours. These values were quoted as the solubilization capacity of the metal oxide at the corresponding conditions. Solubilization capacity increased linearly with the surfactant concentration and R, and portrait a power function with the nominal concentration of HCl in the water pool. A mathematical model previously derived to describe nanoparticle uptake by single microemulsion accurately accounted for the effect of the aforementioned variables on the solubilization capacity.     

Effect of Rough Nanoparticle Orientation on DLVO Energy Interaction

This study investigated the effect of the orientation of rough nanoparticles on Derjaguin and Landau, Verwey and Overbeek (DLVO) energy interaction. Rippled sphere model was used to survey van der Waals attraction energy and repulsive double-layer interaction energy between nanoparticles. The effect of particle size, asperity size, number of asperities, and concentration was studied for different orientations. Spherical coordinates were used to evaluate the effect of changes in orientation under controlled conditions. Surface element integral method was used to calculate DLVO energy interactions between rough particles at specific orientations. The DLVO energy results show that a change in orientation significantly affected the stability of the nanoparticles. The stability of dispersion varied as the contact surface between nanoparticles changed.     

Nanoparticle Halos Mechanism in Stabilizing of Colloidal Suspensions: Polymeric Binder and Dispersant Effects

Dispersion behavior of colloidal Al₂O₃ aqueous suspensions was investigated in the presence of highly charged CeO₂ nanoparticles and polymeric additives. It was found that among the investigated parameters, ceria nanoparticles concentration had the highest significant effect on the stability of Al₂O₃-CeO₂ suspensions. However, the low influence of dispersant concentration may be due to significant role of ceria nanoparticles stabilizing alumina microspheres by “nanoparticle halo” formation. The stabilization of the bidispersed suspensions was also evidenced by scanning electron microscopy and elemental analysis of the sediment layers after three weeks.     

Optical and Electronic Properties of Different Kinds of Water‐Soluble Porphyrin Films

Water‐soluble porphyrin‐porphyrin and porphyrin‐CdSe nanoparticle monolayer films were self‐assembled on different substrates. The influence of substrates, types of films, and heat treatment temperature on fluorescence of different kinds of porphyrin films was investigated. The SEM images showed the formation of monolayer films on porous alumina foil. The films assembled on porous alumina foil possessed higher fluorescence intensity and thermal stability. The result of conductance measurement indicated that the interaction of trimethylamidophenylporphyrin iodide (TAPPI) molecules with hydroxyl groups on porous alumina foil was weakened after CdSe nanoparticles assembled with TAPPI.     

Preparation of Silver Nanofluids with High Electrical Conductivity

Silver nanofluids have been prepared by single-step chemical reduction method starting with silver nitrate metal precursor. Electrical conductivity of nanofluids has been investigated, as it has largely been overlooked despite immense technological importance. Extremely low yield nanofluid (0.013 wt%) is found to give high electrical conductivity attributed to smaller size monodisperse nanoparticles obtained (16.3 nm). Increased precursor concentration has lead to high yield and high electrical conductivity. Larger particle sizes obtained are optimized by reducing the yield at high concentration, as well as by dilution. The stability is exceptionally higher than the reported results for copper nanofluids.     

纳米金标记抗体增强SPR检测大肠杆菌O157∶H7

将金纳米粒子(AuNPs)标记的大肠杆菌O157∶H7(E.coli O157∶H7)的多克隆抗体(PAb)作为二抗,采用氨基偶联法将PAb固定在传感器表面作为一抗,通过三明治方法用双通道表面等离子体子共振(SPR)传感器对E.coli O157∶H7进行检测,并与SPR直接法检测进行了比较.结果表明,直接法的检出限为103cfu/mL,线性范围为103～109cfu/mL;AuNPs增强三明治法的检出限为10 cfu/mL,线性范围为10～1010cfu/mL,灵敏度比直接法提高了100倍,且具有更宽的检测范围.本方法不仅检测时间短,而且具有良好的选择性和重现性.