High pressure stability of protein complexes studied by static and dynamic light scattering

The high pressure dissociation of hemocyanin prepared from the lobster Homarus americanus and casein micelles from cow milk were observed by in situ light scattering. The hemocyanin dodecamer dissociated via a hexamer into monomers in a two-step three-species reaction. The influence of ligands and the effector l-lactate on the dissociation behavior was investigated. While no effect by carbon monoxide after exchanging the ligand oxygen was observed, the addition of the effector l-lactate led to a decrease in the pressure stability. Due to a trimer intermediate which was found to be stabilized by l-lactate, the dissociation reaction in the presence of the effector was analyzed by a three-step four-species reaction. In the case of casein micelles, a two-step dissociation mechanism was found. The stabilizing interactions of casein micelles were identified and separated.     

Hydrothermal synthesis of manganese oxide and nitrogen doped graphene (NG-MnO2) nanohybrid for visible light degradation of methyl orange dye

MnO₂ nanoparticles and its nanocomposite with nitrogen-doped graphene (NG) have been fabricated via simple hydrothermal synthesis procedure using water as a solvent. X-ray diffraction (XRD) analysis of the as-prepared samples was used to ascertain the phase purity and crystallite size. Field emission scanning electron microscopy (FE-SEM) and transmission electron microscopy (TEM) were employed to study the surface features and particle size of the synthesised samples. The photocatalytic ability of the methyl orange (MO) dye with bare MnO₂ and its hybrid with nitrogen-doped graphene (NG-MnO₂) wer compared with visible light prompted degradation of the dye in absence of these catalysts. The prepared nanohybrid (NG-MnO₂) showed improved photocatalytic efficacy as compared to the pure MnO₂ nanoparticles. The strong ferromagnetic character of nanohybrid helps in easy separation of catalyst even with a bar magnet.     

Electrochromic Variation of the Infrared Emissivity in Tungsten Oxide Compounds

The so-called plastic technology first developed for the Li-based batteries leads to a new flexible infrared modulator. Orthorhombic monohydrated tungsten oxide (o-WO³ · H₂O) is used as the active insertion element in the LiCoO₂/o-WO³ · H₂O system. To prevent its degradation under air moisture, the device is protected with hermetic plastic and a window. Measurements of the reflectivity values indicate a very good contrast between the bleached and colored states for the first insertion (about 50% contrast in the 2.5–15 μm range), but the contrast between the inserted and de-inserted states is only about 30%. Optical properties follow quite well Drude mechanism.     

Polarization-independent unidirectional light transmission by an annular photonic crystal prism

Unidirectional transmission of light irrespective of its polarization by a two-dimensional annular photonic crystal in the form of a right prism is numerically demonstrated. Band structure of the crystal obtained through the plane-wave expansion method reveals a directional band gap along a principal axis, leading to prohibition of wave transmission in the reverse direction. In the forward direction, however, transmission of waves is facilitated by circumventing the directional band gap due to altered surface orientation. Polarization-independent unidirectional light transmission is demonstrated through finite-difference time-domain simulations. Unidirectional operation is enhanced and the polarization independence is established through the introduction of an anti-reflection coating layer, which increases the forward transmittances for both polarizations up to 0.44, such that a contrast ratio of 0.96 is attained at a free-space wavelength of 1.55 μm. Although polarization independence deteriorates, unidirectionality is preserved between 1.45 μm and 1.60 μm, provided that the angle of incidence remains between ?5° and +5°. Device performance is also influenced by the transverse source size, where leakage in the reverse direction may be suffered if the source width is beyond a critical value.     

梯度磁场作用下光纤中磁流体光透射特性研究的建模与分析

对光纤中磁流体在梯度磁场作用下的光透射特性进行了研究,提出光纤中磁流体的光透射率变化主要来源于梯度磁场引起的磁流体密度分布变化。根据郎之万函数和流体理论,推导了光纤中磁流体在梯度磁场作用下的密度分布,并根据Beer-Lambert定律,得到磁流体光功率透射衰减和纳米粒子局部密度的关系,从而建立光纤中磁流体在梯度磁场作用下光透射特性的理论模型。进而对光纤中磁流体在不同梯度磁场作用下的光透射功率进行数值分析,得到不同磁场强度和磁场梯度下光纤中磁流体透射功率的变化规律。最后将数值分析的结果和实验数据进行对比,验证了模型的合理性, 同时也验证了梯度磁场作用下磁流体光透射功率的变化主要来源于磁流体密度分布变化的推论。     

光热偏转光谱法的研究

为了建立棱镜型光热偏转光谱法的理论框架,采用棱镜的光色散特性研究了激励光源对待测样品表面周期性照射情况下的探测光偏转角与光热信号之间的解析关系。得到了棱镜型样品表面周期性变化的偏转角表达式。实现结果表明,该方法比传统型光谱法具有理论模型简单、实验容易实现、分辨率高、灵敏度高等优点。     

Color-stable,reduced efficiency roll-off hybrid white organic light emitting diodes with ultra high brightness

High-brightness and color-stable two-wavelength hybrid white organic light emitting diodes (HWOLEDs) with the configuration of indium tin oxide (ITO)/ N, N, N, N-tetrakis(4-methoxyphenyl)-benzidine (MeO-TPD): tetrafluoro-tetracyanoqino dimethane (F4-TCNQ)/N,N-di(naphthalene-1-yl)-N,N-diphenyl-benzidine (NPB)/ 4,4-N,N-dicarbazolebiphenyl (CBP): iridium (III) diazine complexes (MPPZ) 2 Ir(acac)/NPB/2-methyl-9,10-di(2-naphthyl)anthracene (MADN): p-bis(p-N,N-di-phenyl-aminostyryl)benzene (DSA-ph)/bis(10-hydroxybenzo[h] quino-linato)beryllium complex (Bebq2)/LiF/Al have been fabricated and characterized. The optimal brightness of the device is 69932 cd/m2 at a voltage of 13 V, and the Commission Internationale de l'Eclairage (CIE) chromaticity coordinates are almost constant during a large voltage change of 6-12 V. Furthermore, a current efficiency of 15.3 cd/A at an illumination-relevant brightness of 1000 cd/m2 is obtained, which rolls off slightly to 13.0 cd/A at an ultra high brightness of 50000 cd/m2. We attribute this great performance to wisely selecting an appropriate spacer together with effectively utilizing the combinations of exciton-harvested orange-phosphorescence/blue-fluorescence in the device. Undoubtedly, this is one of the most exciting results in two-wavelength HWOLEDs up to now.     

The metamaterial analogue of electromagnetically induced transparency by dual-mode excitation of a symmetric resonator

Electromagnetically induced transparency （EIT） is obtained in a symmetric U-shaped metamaterial, which is at- tributed to the simultaneously excited dual modes in a single resonator under lateral incidence. A large group index accom- panied with a sharp EIT-like transparency window offers potential applications for slowing down light and sensing.     

Comparison between blue lasers and light‐emitting diodes for future solid‐state lighting

Solid‐state lighting (SSL) is now the most efficient source of high color quality white light ever created. Nevertheless, the blue InGaN light‐emitting diodes (LEDs) that are the light engine of SSL still have significant performance limitations. Foremost among these is the decrease in efficiency at high input current densities widely known as “efficiency droop.” Efficiency droop limits input power densities, contrary to the desire to produce more photons per unit LED chip area and to make SSL more affordable. Pending a solution to efficiency droop, an alternative device could be a blue laser diode (LD). LDs, operated in stimulated emission, can have high efficiencies at much higher input power densities than LEDs can. In this article, LEDs and LDs for future SSL are explored by comparing: their current state‐of‐the‐art input‐power‐density‐dependent power‐conversion efficiencies; potential improvements both in their peak power‐conversion efficiencies and in the input power densities at which those efficiencies peak; and their economics for practical SSL.