钼蓝分光光度法测定纯金中的硅

建立了钼蓝分光光度法测定纯金中硅量的方法。确定了基体的分离方法、分离条件、还原剂及其用量;考察了酸度,试剂等对测定的影响。在优化条件下对3个合成试样进行了测定,RSD10%。方法的回收率在97%~122%之间,满足测定的要求。方法适用于0.001%~0.005%的硅量的测定。     

单扫示波极谱滴定钼

提出了直流示波极谱滴定高含量钼的新方法，在ｐＨ为４．５￣５．５的乙酸－乙酸铵缓冲溶液中，以Ｐｂ（Ⅱ）为滴定剂滴定钼酸根离子，用ＪＰ－１Ａ型示波极谱仪作检测器，根据滴定过程中铅波的出现来指示终点的到达。方法简便，快速，结果的准确度，精密度均符合容量分析的要求，适于各类高含量钼矿样中的测定。     

Texture of molybdenum thin films on SrTiO3(1 0 0): A RHEED study

The structure of ultrathin Mo films on SrTiO₃(1 0 0) was studied by in situ reflection high-energy electron diffraction (RHEED). A different structure was observed for films less than 20 Å thick than for thicker films. These films were epitaxial and had a metastable structure. Thicker films had the dimensions of equilibrium bcc Mo(1 1 0). Relaxation processes transformed the metastable Mo into bcc Mo, resulting in the following orientation relationships between Mo and SrTiO₃: (1 1 0)[0 0 1]_bcc Mo ∥ (1 0 0)[0 0 1]_SrTiO3 and (1 1 0)[1 1 1]_bcc Mo ∥ (1 0 0)[0 1 1]_SrTiO3. The formation of such specific orientations is related to transformations via the Bain and Needle Path, respectively.     

火焰原子吸收分析中表面活性剂的增感和抑制干扰作用的机理研究

证实和补充了文献［１］建立的ＦＡＡＳ分析中表面活性剂的增感机理模型，并对ＦＡＡＳ分析中表面活性剂抑制共存元素干扰的作用和机理作了探讨。表面活性剂能抑制共存元素干扰的主要原因是其胶团能和被测元素的离子或干扰离子形成胶团化物；表面活性剂在火焰中中的不完全燃烧使火焰气体还原性增强，温度升高也是其抑制干扰的因素之一。     

A Scalable Process for Production of Single-walled Carbon Nanotubes (SWNTs) by Catalytic Disproportionation of CO on a Solid Catalyst

Existing single-walled carbon nanotube synthesis methods are not easily scalable, operate under severe conditions, and involve high capital and operating costs. The current cost of SWNT is exceedingly high. A catalytic method of synthesis has been developed that has shown potential advantages over the existing methods. This method is based on a catalyst formulation that inhibits the formation of undesired forms of carbon; it can be scaled-up and may result in lower production costs.     

Electrochemical Sensors Using Two‐Dimensional Layered Nanomaterials

Two‐dimensional (2D) layered nanomaterials, e.g. graphene and molybdenum disulfide (MoS₂), have rapidly emerged in material sciences due to their unique physical, chemical and mechanical properties. In the meanwhile, there is a growing interest in constructing electrochemical sensors for a wide range of chemical and biological molecules by using these 2D nanomaterials. In this review, we summarize recent advances on using graphene and MoS₂ for the development of electrochemical sensors for small molecules, proteins, nucleic acids and cells detection. We also provide our perspectives in this rapidly developing field.     

Molybdenum-catalyzed reduction of molecular dinitrogen into ammonia under ambient reaction conditions

Synthesis of transition metal–dinitrogen complexes and stoichiometric transformations of their coordinated dinitrogen into ammonia and hydrazine have so far been well investigated in order to achieve a novel nitrogen fixation under ambient conditions. As an extension of our study, the dimolybdenum–dinitrogen complex bearing PNP pincer ligands has been found to work as an effective catalyst for the formation of ammonia from dinitrogen, where 52 equiv of ammonia are produced based on the catalyst (26 equiv of ammonia are produced based on the molybdenum atom of the catalyst). This is the most effective catalytic reaction system for the formation of ammonia from molecular dinitrogen catalyzed by transition metal–dinitrogen complexes as catalysts under ambient reaction conditions. Herein, we describe recent results concerning the catalytic reaction, including the proposed reaction pathway.     

MoS2 nanosheet arrays supported on hierarchical porous carbon with enhanced lithium storage properties

MoS₂ nanosheet arrays supported on hierarchical nitrogen-doped porous carbon(MoS₂@C)have been synthesized by a facile hydrothermal approach combined with high-temperature calcination.The hierarchical nitrogen-doped porous carbon can serve as three-dimensional conductive frameworks to improve the electronic transport of semiconducting MoS₂.When evaluated as anode material for lithium-ion batteries,the MoS₂@C exhibit enhanced electrochemical performances compared with pure MoS₂ nanosheets,including high capacity(1305.5 mA h g^-1 at 100 mA g^-1),excellent rate capability (438.4 mA h g^-1 at 1000 mA g^-1).The reasons for the improved electrochemical performances are explored in terms of the high electronic conductivity and the facilitation of lithium ion transport arising from the hierarchical structures of MoS₂@C.     

无定型钼硫化物/还原氧化石墨烯的辐射合成及其电催化析氢性能

钼硫化物被认为是一种高效的电催化析氢反应的催化剂,因此其合成方法受到了广泛的研究和关注。本文以四硫代钼酸铵和氧化石墨为前驱体,利用γ射线对其辐照还原,一步法制备了钼硫化物/还原氧化石墨烯(Mo S_x/RGO)复合材料。通过X射线光电子能谱、X射线衍射、透射电子显微镜、Raman光谱等表征手段确认复合材料中的Mo Sx为无定型结构,且氧化石墨烯得到了有效的还原。同时系统研究了吸收剂量、前驱体配比对复合材料作为析氢反应催化剂性能的影响。结果发现,Mo Sx/RGO复合材料具有优异的催化性能,其催化起始电压为110 m V,在电流密度为10 m A·cm~(-2)时过电势仅为160 m V,Tafel斜率为46 m V·dec~(-1),说明该催化剂催化析氢机理为Volmer-Heyrovesy机理。此外,Mo Sx/RGO复合材料还具有良好的催化稳定性。     

One‐step electrodeposition of amorphous carbon films containing WO3 with high conductivity and good wettability

Tungsten trioxide‐incorporated hydrogenated amorphous carbon (WO₃/a‐C:H) films have been fabricated on a single‐crystal silicon wafer by liquid phase electrodeposition using methanol as carbon source and tungsten carbonyl as incorporated reagent. The morphology, composition and structure of the films have been investigated by SEM, XPS, Raman scattering spectroscopy, Fourier transform infrared spectroscopy (FTIR) and Transmission electron microscope (TEM), respectively. The effects of WO₃ incorporation on the electrical and wetting properties were studied in detail. The characterization results showed that tungsten trioxide nanocrystalline particles with diameters in the range of 10–20 nm were homogenously embedded in the amorphous carbon films. Also, the electrical conductivity and wetting ability of the films were strongly improved due to the contribution of the tungsten trioxide. Copyright © 2010 John Wiley & Sons, Ltd.