Development and validation of a RP-HPLC method for Roflumilast and its degradation products

Roflumilast is a phosphodiesterase type 4 inhibitor that is administered orally as a long-term, in the clinical treatment of chronic obstructive pulmonary disease and asthma. Launched in 2010 for the European market, it currently does not have an official monograph. Here, a reproducible gradient RP-HPLC method was developed and validated for the separation and determination of Roflumilast in the presence of its six major degradation products. Separation was performed on a C₁₈ analytical column (250?×?4.6?mm, 5?µm) with a mobile phase-A of ACN and a phase-B of ammonium acetate buffer (5?mM, pH 4.2) containing triethylamine (0.5% v/v). The most effective RP-HPLC gradient program was determined to be 0/80, 35/10, 36/80, 40/80 (time in minutes/% mobile phase-B). The flow rate was 1.0?ml/min and the column temperature was 25°C. The success of separation of the degradation products with different chemical characteristics was obtained by extending the time of the gradient, changing the proportion of the mobile phases and increasing the velocity of the flow. Two detectors were evaluated for the identification of degradation products and Roflumilast: a diode-arrary detector and a charged aerosol detector. The inability of the charged aerosol detector to dectect one of the six degradation products indicated that the method developed with RP-HPLC and the diode-array detector was more suitable for Roflumilast analysis. The method was validated according to specificity, linearity, LOD, LOQ, accuracy, precision and robustness.     

Preparation of dummy template‐imprinted polymers for the rapid extraction of nonsteroidal anti‐inflammatory drugs residues in aquatic environmental samples

A molecularly imprinted polymer was synthesized and applied as a sorbent in the solid‐phase extraction device. The imprinted polymer was characterized by fourier‐transform infrared spectroscopy and scanning electron microscope. The results revealed that imprinted polymer possess sensitive selectivity and reliable adsorption properties for five NSAIDs. The imprinted polymer was successfully applied to the pre‐concentration for five NSAIDs in different water samples prior to UPLC‐MS/MS. In the early studies, several factors were investigated, including pH adjustment, the kind of elution solvent and the volume of elution solvent. Finally, we found that the pH 5 and an aliquot of 2 mL methanol were suitable for the water samples. The limits of detection and limits of quantitation of five nonsteroidal anti‐inflammatory drugs varied from 0.007 to 0.480 μg L⁻¹ and 0.03 to 1.58 μg L⁻¹, respectively. The spiking recoveries of the target analytes were 50.33‐127.64% at the levels of 0.2 μg L⁻¹, 2 μg L⁻¹ and 5 μg L⁻¹. The precision and accuracy of this method showed a great increase compared with traditional solid‐phase extraction. The developed method was successfully applied to extraction and analysis of NSAIDs in different water samples with satisfactory results which could help us better understand their environmental fate and risk to ecological health.     

Molecular signal suppression by in situ microextraction in nuclear magnetic resonance spectroscopy

The detailed characterization of complex mixtures by NMR is often hampered by the presence of signals from uninformative compounds, the resonances of which overlap with those of the molecules of interest. We provide here a proof of principle for an approach to NMR signal suppression in complex samples using Molecularly Imprinted Polymers (MIPS). Addition of a few milligrams of polymer to a solution traps the target molecule in typical micromolar to millimolar concentration, thus achieving in situ signal suppression, without altering any other spectral features. This method minimized any manipulation or perturbation of the spectrum and was applied to a complex mixture of known compounds and to a plant extract, in both cases spiked with a compound (bisphenol A), which was subsequently removed by selective binding to a complementary MIP. What is described in this report is comparable with microextraction and may in due course be applied to a large number of analytical challenges. Copyright © 2014 John Wiley & Sons, Ltd.     

Formulation of Cannabidiol in Colloidal Lipid Carriers

In this study, the general processability of cannabidiol (CBD) in colloidal lipid carriers was investigated. Due to its many pharmacological effects, the pharmaceutical use of this poorly water-soluble drug is currently under intensive research and colloidal lipid emulsions are a well-established formulation option for such lipophilic substances. To obtain a better understanding of the formulability of CBD in lipid emulsions, different aspects of CBD loading and its interaction with the emulsion droplets were investigated. Very high drug loads (>40% related to lipid content) could be achieved in emulsions of medium chain triglycerides, rapeseed oil, soybean oil and trimyristin. The maximum CBD load depended on the type of lipid matrix. CBD loading increased the particle size and the density of the lipid matrix. The loading capacity of a trimyristin emulsion for CBD was superior to that of a suspension of solid lipid nanoparticles based on trimyristin (69% vs. 30% related to the lipid matrix). In addition to its localization within the lipid core of the emulsion droplets, cannabidiol was associated with the droplet interface to a remarkable extent. According to a stress test, CBD destabilized the emulsions, with phospholipid-stabilized emulsions being more stable than poloxamer-stabilized ones. Furthermore, it was possible to produce emulsions with pure CBD as the dispersed phase, since CBD demonstrated such a pronounced supercooling tendency that it did not recrystallize, even if cooled to −60 °C.     

Ultrathin Mn Doped Ni-MOF Nanosheet Array for Highly Capacitive and Stable Asymmetric Supercapacitor

In this study, we demonstrate that an Mn-doped ultrathin Ni-MOF nanosheet array on nickel foam (Mn_0.1-Ni-MOF/NF) serves as a highly capacitive and stable supercapacitor positive electrode. The Mn_0.1-Ni-MOF/NF shows an areal capacity of 6.48 C cm⁻² (specific capacity C: 1178 C g⁻¹) at 2 mA cm⁻² in 6.0 m KOH, outperforming most reported MOF-based materials. More importantly, it possesses excellent cycle stability to maintain 80.6 % capacity after 5000 cycles. An asymmetric supercapacitor device utilizing Mn_0.1-Ni-MOF/NF as the positive electrode and activated carbon as the negative electrode attains a high energy density of 39.6 Wh kg⁻¹ at 143.8 Wkg⁻¹ power density with a capacitance retention of 83.6 % after 5000 cycles.     

Tailoring a Dress to Single Protein Molecules: Proteins Can Do It Themselves through Localized Photo-Polymerization and Molecular Imprinting

Molecularly imprinted polymer nanoparticles (MIP NPs) are antibody-like recognition materials prepared by a template-assisted synthesis. MIP NPs able to target biomolecules, like proteins, are under the spotlight for their great potential in medicine, but efficiently imprinting biological templates is still very challenging. Here we propose generating a molecular imprint in single NPs, by photochemically initiating the polymerization from individual protein templates. In this way, each protein molecule tailors itself its own “polymeric dress”. For this, the template protein is covalently coupled with a photoinitiator, Eosin Y. Irradiated with light at 533 nm, the Eosin moiety acts as an antenna and transfers energy to a co-initiator (an amine), which generates a radical and initiates polymerization. As a result, a polymer network is forming only around the very template molecule, producing cross-linked NPs of 50 nm, with single binding sites showing high affinity (K_D 10⁻⁹ m ) for their biological target, and selectivity over other proteins.     

A novel molecularly imprinted method with computational simulation for the affinity isolation and knockout of baicalein from Scutellaria baicalensis

A novel molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization with baicalein (BAI) as the template and used as solid‐phase extraction (SPE) adsorbent, aiming at the affinity isolation and selective knockout of BAI from Scutellaria baicalensis Georgi (SB). We used computational simulation to predict the optimal functional monomer, polymerization solvent and molar ratio of template to functional monomer. Characterization and performance tests revealed that MIP exhibited uniform spherical morphology, rapid binding kinetics, and higher adsorption capacity for BAI compared with nonimprinted polymer (NIP). The application of MIP in SPE coupled with high‐performance liquid chromatography to extract BAI from SB showed excellent recovery (94.3%) and purity (97.0%). Not only the single BAI compound, but also the BAI‐removed SB extract was obtained by one‐step process. This new method is useful for isolation and knockout of key bioactive compounds from herbal medicines. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation of 17β‐estradiol surface molecularly imprinted polymers and their application to the analysis of biological samples

17β‐Estradiol (E2) surface molecularly imprinted polymers have been prepared using functionalized monodispersed poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) beads as a support. The resulting polymers were found to be uniform in size (5 μm), and the surfaces of the microspheres possessed large pore‐like structures. A chromatographic experiment demonstrated that the resulting microspheres exhibited high levels of recognition and selectivity toward the target molecule. The particles were employed as a novel sorbent in a molecularly imprinted SPE protocol. A method was then developed involving the combination of the pretreatment with HPLC to determine the levels of estrogen secreted from Michigan Cancer Foundation‐7 cells. The obtained results revealed that the extraction recoveries of E2 from real samples were in the range of 73.0–97.5% with RSDs of < 7.5% (n = 3). Calibration curves were established with R values > 0.9996 for concentrations in the range of 0.50–100.00 ng/mL. The LOD of this new method was 0.14 ng/mL. Compared with traditional C₁₈ SPE agents, the particles showed high selectivity and extraction efficiency for E2 in the pretreatment process. The particles could therefore be used to determine trace estrogen in biological samples with a UV detector only.     

Synthesis and application of molecularly imprinted nanoparticles combined ultrasonic assisted for highly selective solid phase extraction trace amount of celecoxib from human plasma samples using design expert (DXB) software

In this work molecular imprinted nanoparticles (MINPs) was synthesized and applied for ultrasonic assisted solid phase extraction of celecoxib (CEL) from human plasma sample following its combination by HPLC–UV. The MINPs were prepared in a non-covalent approach using methacrylic acid as monomer, CEL as template, ethylene glycol dimethacrylate as cross-linker, and 2,2-azobisisobutyronitrile (AIBN) as the initiator of polymerization. pH, volume of rinsing and eluent solvent and amount of sorbent influence on response were investigated using factorial experimental design, while optimum point was achieved and set as 250 mg sorbent, pH 7.0, 1.5 mL washing solvent and 2 mL eluent by analysis of results according to design expert (DX) software. At above specified conditions, CEL in human plasma with complicated matrices with acceptable high recoveries (96%) and RSD% lower than 10% was quantified and estimated.The proposed MISPE-HPLC–UV method has linear responses among peak area and concentrations of CEL in the range of 0.2–2000 μg L⁻¹, with regression coefficient of 0.98. The limit of detection (LOD) and quantification (LOQ) based on three and ten times of the noise of HPLC peaks correspond to blank solution were 0.08 and 0.18 μg L⁻¹, respectively.     

Modification of Carbon Paste Electrode Based on Molecularly Imprinted Polymer for Electrochemical Determination of Diazinon in Biological and Environmental Samples

The wide use of pesticides can lead to environmental and human adverse effects. Diazinon, as an organophosphorous pesticide, is used in agriculture because of its low cost and high efficiency on insects. Due to the increasing application of pesticides, accurate analytical methods are necessary. The aim of this work was modification of carbon paste electrode composition and applying it as a sensor for determination of diazinon in biological and environmental samples. Multi‐walls carbon nanotubes and a molecularly imprinted polymer were used as modifiers in the sensor composition. A molecularly imprinted polymer and a non‐imprinted polymer were synthesized for applying in the electrode. After optimization of electrode composition, it was used to determine the analyte concentration. Instrumental parameters affecting the square wave voltammetric response were adjusted to obtain the highest current intensity. The modified electrode with MIP showed very high recognition ability compared to the electrode containing NIP. The obtained linear range was 5×10⁻¹⁰ to 1×10⁻⁶ mol L⁻¹. The detection limit of the sensor was 1.3×10⁻¹⁰ mol L⁻¹ and the relative standard deviation for analysis of target molecule by the proposed sensor was 2.87 %. This sensor was used to determine the diazinon in real samples (human urine, tap, and river water samples) without special sample preparation before analysis. The optimization of electrode composition containing mentioned modifiers improved its response considerably.