The first example of anodic corrosion of Pd in aqueous ethylenediamine with formation of colloidal palladium

For the first time, corrosion of a Pd anode was detected during electrolysis in a weakly alkaline aqueous solution of ethylenediamine. The kinetics and mechanism of the process were investigated by the methods of cyclic voltammetry and gravimetry. Scanning electron microscopy showed corrosion of the Pd anode and deposition of Pd on the cathode surface, while the formation of colloidal Pd in the working solution was identified by transmission electron microscopy.     

A comparison of measured room acoustics metrics using a spherical microphone array and conventional methods

The traditional microphone configuration used to measure room impulse responses (IRs) according to ISO 3382:2009 is an omnidirectional and figure-8 microphone pair. IRs measurements were taken in a 2500-seat auditorium to determine how the results from a spherical microphone array (an mh acoustics Eigenmike-em32) compare to those from the traditional microphone setup (a Brüel & Kjær Type-4192 omnidirectional microphone and a Sennheiser MKH30 figure-8 microphone). Measurements were obtained at six receiver locations, with three repetitions each in order to first evaluate repeatability. The metrics considered in this study were: reverberation time (T30), early decay time (EDT), clarity index (C80), strength (G), lateral energy fraction (J_LF) and late lateral energy level (L_J). Before calculating these quantities, the IRs were filtered to equalize the frequency response of the microphones and sound source. For the spherical array measurements, the omnidirectional (monopole) and figure-8 (dipole) patterns were extracted using beamforming. In terms of repeatability, the average standard deviation of the three measurements at each receiver location averaged across all metrics, receivers, and octave bands was found to be 0.01 just noticeable differences (JNDs). The analysis comparing the measurements from the two microphone configurations yielded differences which were less than 1 JND for the majority of metrics, with a few exceptions of EDT and C80 slightly above 1 JND. Based on this case study, these results indicate that spherical microphone arrays can be used to obtain valid room IR measurements, which will allow for the development of new metrics utilizing the higher spatial resolution made possible with spherical arrays.     

Dimerization of Colloidal Particles through Controlled Aggregation for Enhanced Properties and Applications

Devising syntheses capable of precisely manipulating matter on the nanoscale is central to many areas of research. The underlying motivation is fueled by the fact that at the nanometer scale, the property has a strong correlation with the structure. One such nanostructure that has accrued much attention is the dimer—a structure composed of two colloidal particles separated by a small gap. This Focus Review discusses how colloidal stability can be strategically manipulated to induce dimerization, together with effective purification steps to further improve yields. We conclude the article by providing representative examples for how dimers composed of plasmonic nanoparticles leads to structures with tunable optical properties and strong electric near‐fields, ideal for application in surface‐enhanced Raman spectroscopy.     

Colorimetric Chemosensor for Chloramphenicol Based on Colloidal Magnetically Assembled Molecularly Imprinted Photonic Crystals

A novel colorimetric chemosensor with good sensitivity, specificity, and self‐reporting capability for chloramphenicol (CAP ) has been successfully constructed based on colloidal, magnetically assembled photonic crystals coupled with molecular imprinting. The colloidal, magnetically assembled, molecularly imprinted photonic crystals (CMA ‐MIPCs ) were prepared by assembling CAP in magnetic, molecularly imprinted nanohydrogels (MMIHs ) in a magnetic field. The magnetic assembly of photonic crystals and the sensing processes could be completed simultaneously when MMIHs were dispersed in CAP solutions and in a magnetic field, and the response time was less than 1 min. The CAP concentration could be visually determined from the color change of the CMA ‐MIPCs sensor. The diffraction color blue‐shifted from luminous yellow of the blank to purple in a 1.0 mg/mL CAP solution, with a determination limit of 1.0 × 10⁻³ mg/mL. It could provide a new strategy for qualitative or semiquantitative detection of CAP .     

Study on an optical system with coherent laser array source and phase optimization in turbulent atmosphere

Model of an optical system with coherent laser array source and the piston phase optimized by the stochastic parallel gradient descent algorithm is established. With this model, theory of beam propagation through the optical system in turbulent atmosphere is analyzed, and the analytical formulas of the beam average intensity along the propagation path are derived. Strehl ratio of the received beam induced by intensity disorderly distribution and power efficiency of the received beam are introduced to evaluate performance of the optical system. Under the H-V 5/7 atmospheric turbulent model, performance of an optical system with determinate parameters was calculated, and the influences of the propagation distance and the laser wavelength were numerically analyzed, respectively.     

Influence of aspect ratio and anisotropy distribution in ordered CoNi nanowire arrays

The size effects on magnetic properties of nanowires arrays were studied varying the nanowires diameter and maintaining the same periodicity among them, for two different nominal compositions of Co and Ni in the alloy form. The competition among magnetocrystalline and shape anisotropies changes drastically from smallest to biggest diameters altering the easy axis direction. In the case of 75% of Co in alloy, experimental values of the effective anisotropy constant (K_eff) vary from positive to negative depending on the diameter, which means a reversal of the easy axis direction. For 50% of Co the shape anisotropy dominates over the magnetocrystalline for all studied diameters.     

Overcoming the Inhibition Effects of Citrate: Precipitation of Ferromagnetic Magnetite Nanoparticles with Tunable Morphology,Magnetic Properties,and Surface Charge via Ferrous Citrate Oxidation

This study demonstrates how the method of thermally assisted oxidative precipitation in water can be opened for—the so far neglected—metal organic iron(II) complexes (herein: citrate) in order to obtain, in one step, ferromagnetic magnetite nanoparticles, possessing essential ligand properties. Based on a dedicated analysis of the specific precursor in combination with the consideration of known properties of the ligand, it is possible to identify existing inhibition-attributes of the iron organyl such that these can be overcome. Moreover, they can be exploited in a targeted manner; thus, simply by changing concentrations, a variety of magnetite nanoparticle morphologies with distinct properties can be obtained. In the case of the herein investigated ferrous citrate, three major inhibition effects are identified. While two of them efficiently prevent the formation of magnetite and need to be addressed to be overcome, the third can be exploited to selectively synthesize, for example, relatively stable carboxyl group-bearing nuclei clusters, exhibiting the properties of magnetically responsive photonic crystals, or relatively large mesocrystals, whose intraparticular magnetic interactions are apparently disturbed.     

Synthesis and evaluation of the anticancer activity of the water-dispersible complexes of 4-acylaminoisoxazole derivative with biocompatible nanocontainers based on Ca2+ (Mg2+) cross-linked alginate

Water-dispersible complexes of 4-methyl-N-[5-methyl-3-(3,4,5-trimethoxyphenyl)isoxazol-4-yl]benzamide possessing anticancer activity were prepared by its immobilization with biocompatible polymer nanocontainers based on sodium alginate cross-linked with Ca²⁺ and Mg²⁺ ions. It was found that this isoxazole derivative retains its structure during immobilization. Colloidal stable nanocontainers filled with this compound exhibit toxicity toward the colon carcinoma (HCT116) tumor cell line.     

二维胶体玻璃中玻色峰与结构无序度的关联

本文从实验上研究了胶体玻璃在相同面密度下随着体系结构无序程度的增加, 振动态密度和玻色峰的变化规律. 通过调制两种不同粒径的温敏性水凝胶的数量比来改变体系的无序程度. 通过分析无序体系的声子模式得到体系的振动特性. 研究发现, 随着无序度的增加, 态密度在低频区域增强、玻色峰增高、玻色峰的峰值向低频区域移动. 不同无序程度的样品引起玻色峰的低频声子模式都表现出准局域的特点, 且低频准局域声子模式与样品中无序结构存在关联.     

Bridging Two Worlds: Colloidal versus Epitaxial Quantum Dots

An overview is given of two distinct classes of semiconductor quantum dots, epitaxial and colloidal structures that have been studied intensely for more than 30 years by now, however, without large interconnection between the two involved research communities. The largely parallel and independent evolution of the two structure classes may be partly related to the origin of colloidal systems from chemistry, while epitaxial quantum dots have been addressed mostly by the physics community. These independent evolutions are somewhat surprising because the interest in optics‐related applications is shared by both communities. Here, a short summary of the development of the two structure classes, the present status of activities, and some perspectives for future developments are presented.