A critical reappraisal of recent communications on the hydrodynamic characterization of silica (aerosil) hydrosols

Different results from recent communications on the hydrodynamic characterization of ultrasonicated silica (®Aerosil) hydrosols led to a critical reappraisal of the data.It can be concluded that the degree of dispersion achievable in pyrogenic (Aerosil) hydrosols by ultrasonication is highly sensitive to the detailed parameters of the dispersion process. Characterization in terms ofabsolute numbers of a limiting particle morphology, corresponding to minima of aggregate size, porosity and number of primary particles in the aggregate is not possible.The most straightforward approach for hydrodynamic characterization seems to be a combination of sedimentation and diffusion data.Other approaches using a combination of sedimentation and viscosity data underestimate the particle dimensions. Moreover, they are quite arbitrary since the final result depends upon the proper choice between several equations for fitting the viscosity concentration dependence; the most rigorous approach seems to be an extended Einstein equation which has recently been adapted to particle aggregates.     

Integrated chemical sensor array platform based on a light emitting diode, xerogel-derived sensor elements, and high-speed pin printing

We report a new, solid-state, integrated optical array sensor platform. By using pin printing technology in concert with sol-gel-processing methods, we form discrete xerogel-based microsensor elements that are on the order of 100 μm in diameter and 1 μm thick directly on the face of a light emitting diode (LED). The LED serves as the light source to excite chemically responsive luminophores sequestered within the doped xerogel microsensors and the analyte-dependent emission from within the doped xerogel is detected with a charge coupled device (CCD). We overcome the problem of background illumination from the LED reaching the CCD and the associated biasing that results by coating the LED first with a thin layer of blue paint. The thin paint layer serves as an optical filter, knocking out the LEDs red-edge spectral tail. The problem of the spatially-dependent fluence across the LED face is solved entirely by performing ratiometric measurements. We illustrate the performance of the new sensor scheme by forming an array of 100 discrete O₂-responsive sensing elements on the face of a single LED. The combination of pin printing with an integrated sensor and light source platform results in a rapid method of forming (∼1 s per sensor element) reusable sensor arrays. The entire sensor array can be calibrated using just one sensor element. Array-to-array reproducibly is <8%. Arrays can be formed using single or multiple pins with indistinguishable analytical performance.     

Preparation and evaluation of uniform-sized molecularly imprinted polymer beads used for the separation of sulfamethazine

Uniform-sized molecularly imprinted polymer (MIP) beads were prepared using a one-step swelling and polymerization method. The obtained sulfamethazine (SMZ)-imprinted polymer showed high affinity and selectivity toward SMZ and other structurally related sulfonamides in acetonitrile or water-acetonitrile mobile phases, particularly in high aqueous systems. The column performance of the MIPs for SMZ and its analogues could be improved by elevating the column temperature and optimizing the flow rate. The hydrogen-bonding effect plays a significant role in the recognition process of SMZ-imprinted polymer systems in organic media, while the ion-exchange effect, as well as hydrophobic effect, dominates the retention mechanism in aqueous-rich media, in addition to shape recognition.     

meso-substituted aromatic 34pi core-modified octaphyrins: syntheses,characterization and anion binding properties

Modified octaphyrins with 34pi electrons have been synthesized and characterized following a simple synthetic methodology. An acid-catalyzed alpha,alpha coupling of tetrapyrranes containing furan, thiophene and selenophene rings resulted in the formation of the respective octaphyrins in relatively good yield. Solution studies by (1)H NMR and 2D NMR methods and single crystal Xray structural characterization reveal an almost flat structure with two heterocyclic rings inverted. Specifically, in 14 two selenophene rings (one on each biselenophene unit) are inverted while in 15 two furan rings (one on each bifuran unit) are inverted when the meso substituent are mesityl groups. On changing the mesityl substituent to m-xylyl group as in 19, the location of ring inversion shifts to pyrrole rings (one on each bipyrrole unit) indicating the dependence of structure on the meso substituents. UV/Vis studies, both in freebase and protonated forms reveal typical porphyrinic character and the aromatic nature of the octaphyrins. The Deltadelta values evaluated by (1)H NMR spectroscopy also support their aromatic nature. The protonated forms of octaphyrins bind TFA anion in a 1:2 ratio. The TFA anions are located one above and below the plane of the octaphyrin macrocycle and they are held by weak electrostatic NH-O interactions similar to that observed for protonated rubyrins. However, in the present case, there is an additional non-electrostatic CH-O interaction involving beta-CH of the inverted heterocyclic ring and the carbonyl oxygen of the TFA. Furthermore, inter molecular interactions between the Cbond;H of the meso-mesityl group and the fluorine of CF(3) group of bound TFA leads to the formation of one-dimensional supramolecular arrays with interplanar distance of 13 A between two octaphyrins.     

Sequential injection system with higher dimensional electrochemical sensor signals Part 2. Potentiometric e-tongue for the determination of alkaline ions

An intelligent, automatic system based on an array of non-specific-response chemical sensors was developed. As a great amount of information is required for its correct modelling, we propose a system generating it itself. The sequential injection analysis (SIA) technique was chosen as it enables the processes of training, calibration, validation and operation to be automated simply. Detection was carried out using an array of potentiometric sensors based on PVC membranes of different selectivity. The diluted standard solutions needed for system learning and response modelling are automatically prepared from more concentrated standards. The electrodes used were characterised with respect to one and two analytes, by means of high-dimensionality calibrations, and the response surface of each was represented; this characterisation enabled an interference study of great practical utility. The combined response was modelled by means of artificial neural networks (ANNs), and thus it was possible to obtain an automated electronic tongue based on SIA. In order to identify the ANN which provided the best model of the electrode responses, some of the network's parameters were optimised and its usefulness in determining NH₄⁺, K⁺ and Na⁺ ions in synthetic samples was then tested. Finally, it was used to determine these ions in commercial fertilisers, the obtained results being compared with reference methods.     

Multivariate analysis of non-homogeneous peaks in liquid chromatography

Summary The effects of concentration, separation and spectral similarity as factors influencing the accuracy of iterative target testing factor analysis (ITT-FA) are investigated for three component systems by the application of analysis of variance (ANOVAR). ANOVAR is applied over a range of peak separations to map the changing effects of the three factors with increasing overlap. Two error responses were measured and analysed, (a) Relative cluster error (RCE) a measure of the error over all peaks in a cluster and (b) Relative peak error (RPE) the error of an individual peak. Multicomponent analysis (MCA) a method requiringa priori spectral information, is used as a referee method for ITT-FA.     

Screen-printed multienzyme arrays for use in amperometric batch and flow systems

Screen-printing technology for electrode fabrication enables construction of amperometric devices suitable for combination of several enzyme electrodes. To develop a biosensor array for characterisation of wastewaters, tyrosinase and horseradish peroxidase (HRP) or cholinesterase-modified electrodes were combined on the same array. The behaviour of the tyrosinase-modified electrode in the presence of hydrogen peroxide (required co-substrate for the HRP-modified electrode) and acetylthiocholine chloride (required co-substrate for cholinesterase) was studied. Performance of bi-enzyme biosensor arrays in the batch mode and in the flow-injection system are discussed.     

Synthesis of Molecularly Imprinted Polymer Particles by Suspension Polymerization in Silicon Oil

Molecular imprinting is a method to prepare polymers with recognition site of desired and predetermined selectivity1. Molecularly imprinted polymers (MIP) are prepared by copolymerizing functional and cross-linking monomers in the presence of a molecular …     

Application of diode array detectors for solute identification in toxicological analysis

Summary The possibilities and limitation of automated solute identification via UV/VIS spectroscopy in HPLC are demonstrated and applications in toxicologic analysis are described. A standard isocratic system is used. The influence of various chromatographic parameters on retention time is shown. A retention time window of ±15% is required. In addition to retention time, derived spectral data are calculated (minima and maxima of derivatives, area counts under standardized spectral ranges, absorption at various wavelength) and used for positive solute identification. It is possible to identify solutes with a high degree of certainty in urine and plasma if their concentration is at least 10 ppm.     

孔性氧化铝模板与一维纳米新材料的制备

纳米材料尤其是以碳纳米管有序阵列为代表的一维纳米阵列材料的重要价值,促进了人们对模板合成方法的研究。本文简要回顾和总结了近年来有关孔性氧化铝模板的制备及其应用的研究进展,结合我们实验室的部分相关研究工作,揭示了孔性氧化铝模板在合成与组装一维纳米新材料方面的重要作用,以进一步活跃和促进该重要领域的研究和发展。