Binuclear ruthenium(II) pyridazine complex catalyzed transfer hydrogenation of ketones

A convenient and general method of synthesis of binuclear ruthenium(II) pyridazine complex was reported. The synthesized complex was characterized by analytical and spectral methods. The structure of the complex was confirmed by X-ray diffraction technique and was found to be an efficient catalyst for the transfer hydrogenation of ketones with excellent conversions in the presence of isopropanol/KOH at 82 °C. The effect of solvents, bases, and different catalyst/substrate ratio for the reaction was also investigated.     

Influence of the e-beam irradiation and photo-oxidation aging on the structure and properties of LDPE-OMMT nanocomposite films

In this paper two systems, polyethylene (LDPE) and polyethylene/commercial organo-modified montmorillonite (LDPE/OMMT) nanocomposite, were subjected to e-beam irradiation at different doses and both the molecular modifications and mechanical properties have been investigated through solubility, FT-IR, calorimetric and tensile tests. Moreover, in some of the irradiated systems photo-oxidation aging was performed and its effects were studied. The results show an enhancement with irradiation of the positive effect of the nano-filler loading, related to the increase of the mechanical properties, due to the increase of the nano-filler polymer interaction.Nevertheless calorimetric and FT-IR data indicate that the well known reduction of LDPE/OMMT nanocomposite resistance to photo-oxidation ageing, with respect to LDPE, is amplified by ionizing radiation.     

Synthesis of Acrylamide Molecularly Imprinted Polymers Immobilized on Graphite Oxide through Surface-Initiated Atom Transfer Radical Polymerization

A novel acrylamide (AA) molecularly imprinted polymer was synthesized by atom transfer radical polymerization (ATRP) on graphite oxide (GO) particles. Propionamide (PAM) was used as a dummy template molecule, hydroxy ethyl acrylate (HEA) as a functional monomer, ethylene glycol dimethacrylate (EDMA) as a crosslinking agent, and acetonitrile as both solvent and dispersion medium. Scanning electron microscopy (SEM) images and infrared spectroscopy (IR) confirmed that the molecularly imprinted polymers (MIP) were successfully grafted onto the surface of the GO particles. The corresponding adsorption kinetic curves and adsorption isotherms showed that the AA adsorption reached equilibrium after 5 h, with large amounts of AA being adsorped in the first 100 min. The maximum AA adsorption capacity was 123.48 µmol g^?1 according to Scatchard analysis, which indicated that the MIP possesses good AA adsorption capacity. This MIP-GO material was used to selectively determine AA in fried food samples.     

The high resolution infrared spectrum and laser Stark spectroscopy of thev8 band of propyne

The perpendicularv ₈ band lying in the 1000–1100 cm^–1 region has been studied from infrared and laser Stark, spectra. We were interested in the part of spectrum corresponding to the spectral range of the 9 m CO₂ laser lines. Assignments of rovibrational lines with J'<40 and K'<6 have been made. About 100 Stark resonances have been assigned to 12 rovibrational transitions. Effective molecular constants and dipole moment have been determined with high accuracy. A list of close resonances with CO₂ laser lines is given and may be used for optical pumping experiments.     

First-order system least squares and the energetic variational approach for two-phase flow

This paper develops a first-order system least-squares (FOSLS) formulation for equations of two-phase flow. The main goal is to show that this discretization, along with numerical techniques such as nested iteration, algebraic multigrid, and adaptive local refinement, can be used to solve these types of complex fluid flow problems. In addition, from an energetic variational approach, it can be shown that an important quantity to preserve in a given simulation is the energy law. We discuss the energy law and inherent structure for two-phase flow using the Allen–Cahn interface model and indicate how it is related to other complex fluid models, such as magnetohydrodynamics. Finally, we show that, using the FOSLS framework, one can still satisfy the appropriate energy law globally while using well-known numerical techniques.     

Towards a fully optimised organic LED device: Analysis of surface synthesis using coupling reactions by ToF-SIMS

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and polarisation-modulation reflection-absorption infrared spectroscopy (PM-RAIRS) have been used to monitor the surface synthesis of self-assembled aromatic π-conjugated molecular wires on gold substrates as a step towards a novel structure for organic electroluminescent devices (OLEDs). The wires have been synthesised using a series of Schiff's base coupling reactions in solution on a self-assembled monolayer of an aromatic thiolate anchor. ToF-SIMS and PM-RAIRS measurements have demonstrated that: (i) the anchor molecules self-assemble at the gold surface, (ii) the anchor molecules selectively react through imino coupling reactions with additional wire units with high efficiency and (iii) the wire-like structure is predominantly orientated normal to the surface.     

Microwave spectrum and structure of furfural

The microwave spectrum of furfural was investigated in the frequency range 7 GHz-21 GHz and 49 GHz-330 GHz. The ground and first torsional state of trans-furfural and ground state of cis-furfural were assigned and analyzed. A total of 1720 rotational lines with J up to 100 and K_a up to 53 were assigned to the ground state of trans-furfural, 1406 rotational lines with J up to 100 and K_a up to 48 were assigned to the first torsional state of trans-furfural and 2103 rotational lines with J up to 90 and K_a up to 48 to the ground state of cis-furfural. Accurate sets of centrifugal distortion constants for both conformations have been determined for the first time. The spectra of all ¹³C and ¹⁸O singly substituted isotopic species were observed in natural abundance in the 7 GHz-21 GHz range. Molecular structure co-ordinates, bond lengths and angles of the Kraitchman substitution type (r_s) and pseudo-Kraitchman type (r_pKr) are derived from the isotopic studies.     

Ultrasonic sensor for predicting sugar concentration using multivariate calibration

This paper presents a multivariate regression method for the prediction of maltose concentration in aqueous solutions. For this purpose, time and frequency domain of ultrasonic signals are analyzed. It is shown, that the prediction of concentration at different temperatures is possible by using several multivariate regression models for individual temperature points. Combining these models by a linear approximation of each coefficient over temperature results in a unified solution, which takes temperature effects into account. The benefit of the proposed method is the low processing time required for analyzing online signals as well as the non-invasive sensor setup which can be used in pipelines. Also the ultrasonic signal sections used in the presented investigation were extracted out of buffer reflections which remain primarily unaffected by bubble and particle interferences.     

Adsorption dynamics of O2 on Cu(1 0 0)

We have studied the adsorption of O₂ on the Cu(1 0 0) surface using both static potential energy surface (PES) calculations and ab initio molecular dynamics. The dynamical calculations complement the PES results, revealing steering effects which could not be predicted based on the static calculations only. We study the effect of oxidation and Ag doping on O₂ adsorption dynamics. The results are discussed in the light of recent molecular beam experiments.     

Energy levels in doped SiGe quantum well studied by admittance spectroscopy

SiGe/Si quantum wells (QWs) with different Boron doping concentrations were grown by molecular beam epitaxy (MBE) on p-type Si(1 0 0) substrate. The activation energies of the heavily holes in ground states of QWs, which correspond to the energy differences between the heavy hole ground states and Si valence band, were measured by admittance spectroscopy. It is found that the activation energy in a heavily doped QW increases with doping concentration, which can be understood by the band alignment changes due to the doping in the QWs. Also, it is found that the activation energy in a QW with a doping concentration of 2 × 10²⁰ cm⁻³ becomes larger after annealing at a temperature of 685 °C, which is attributed to more Boron atoms activation in the QW by annealing.