Investigation on thermal conductivity of graphene/Si heterostructure with different defect ratios and sizes

The thermal conductivity (TC) of graphene/Si heterostructures with different defect ratios and sizes was investigated using the molecular dynamics method. As the defect ratio of heterostructure increased, the TC decreased first sharply and then slowly under a high temperature stage. The TC of heterostructure also showed a significant size effect. This phenomenon was explained by phonon dispersion and flip competition. The phonon density of states for the graphene heterostructure with different defect ratios and sizes was obtained to understand the thermal transport mechanism. Analysis showed that with the increase in the defect ratio and when the flexural modes of the heterostructure became weak, the longitudinal and transverse modes gradually dominated the phonon transport. This phenomenon can be explained that the Si atom vibration was harder in the vertical plane than that of graphene. The vibration mode hindered the heat carrier of graphene and affected heat transport to the heterostructure.     

Localized enzymolysis and sonochemically modified sunflower protein: Physical,functional and structure attributes

Impacts of localized enzymolysis and sonication on physical, techno-functional, and structure attributes of sunflower meal protein (SMP) and its hydrolysate (SMPH) were studied. SMP was subjected to enzymolysis (using alcalase) to prepare SMPH with various degrees of hydrolysis (6–24% DH). Enzymolysis decreased colour lightness, turbidity, and particle size of unsonicated and sonicated SMP, while it increased the absolute values of zeta potential (P < 0.05). Sonication improved oil absorption capacity and dispersibility over unsonicated samples. Contrarily, sonicated preparations showed a decrease in water holding capacity. Intrinsic fluorescence and FTIR spectral analyses suggested that SMPH had more movable/flexible secondary structures than SMP. Moreover, the changes in sulfhydryl clusters and disulfide linkages following sonication demonstrated limited unfolding of SMP and SMPH structure and decrease in intermolecular interactions. SDS-PAGE profile exhibited significant reduction in molecular weight (MW) of sonicated SMP, whereas did not display differences between unsonicated and sonicated SMPH. From further MW analysis, SMPH was categorized with high proportion of small-sized peptides ≤ 3 kDa fractions, which increased from 78.64 to 93.01% (control) and from 82.3 to 93.88% (sonication) with enzymolysis (6–24DH). Localized enzymolysis and sonication can be utilised to modify the physical and conformational attributes of SMP and SMPH, which could enhance their functionalities and broaden the utilisation area in food industry.     

Metamorphic InAs(Sb)/InGaAs/InAlAs nanoheterostructures grown on GaAs for efficient mid-IR emitters

High-efficiency semiconductor lasers and light-emitting diodes operating in the 3–5?μm mid-infrared (mid-IR) spectral range are currently of great demand for a wide variety of applications, in particular, gas sensing, noninvasive medical tests, IR spectroscopy etc. III-V compounds with a lattice constant of about 6.1?Å are traditionally used for this spectral range. The attractive idea to fabricate such emitters on GaAs substrates by using In(Ga,Al)As compounds is restricted by either the minimum operating wavelength of ～8?μm in case of pseudomorphic AlGaAs-based quantum cascade lasers or requires utilization of thick metamorphic In_xAl_1-xAs buffer layers (MBLs) playing a key role in reducing the density of threading dislocations (TDs) in an active region, which otherwise result in a strong decay of the quantum efficiency of such mid-IR emitters. In this review we present the results of careful investigations of employing the convex-graded In_xAl_1-xAs MBLs for fabrication by molecular beam epitaxy on GaAs (001) substrates of In(Ga,Al)As heterostructures with a combined type-II/type-I InSb/InAs/InGaAs quantum well (QW) for efficient mid-IR emitters (3–3.6?μm). The issues of strain relaxation, elastic stress balance, efficiency of radiative and non-radiative recombination at T?=?10–300?K are discussed in relation to molecular beam epitaxy (MBE) growth conditions and designs of the structures. A wide complex of techniques including in-situ reflection high-energy electron diffraction, atomic force microscopy (AFM), scanning and transmission electron microscopies, X-ray diffractometry, reciprocal space mapping, selective area electron diffraction, as well as photoluminescence (PL) and Fourier-transformed infrared spectroscopy was used to study in detail structural and optical properties of the metamorphic QW structures. Optimization of the growth conditions (the substrate temperature, the As₄/III ratio) and elastic strain profiles governed by variation of an inverse step in the In content profile between the MBL and the InAlAs virtual substrate results in decrease in the TD density (down to 3?×?10⁷ cm^?2), increase of the thickness of the low-TD-density near-surface MBL region to 250–300?nm, the extremely low surface roughness with the RMS value of 1.6–2.4?nm, measured by AFM, as well as rather high 3.5?μm-PL intensity at temperatures up to 300?K in such structures. The obtained results indicate that the metamorphic InSb/In(Ga,Al)As QW heterostructures of proper design, grown under the optimum MBE conditions, are very promising for fabricating the efficient mid-IR emitters on a GaAs platform.     

Das Pyren und der Einfluß von Substitution oder Komplexie-rung auf seine Geometrie und Packung im kristallinen Zustand

The crystal structures of pyrene and substituted and complexed derivatives of pyrene have been investigated by X-ray and neutron diffraction. The geometry of the pyrene skeleton has been determined experimentally with high accuracy and calculated by quantum chemical methods. In the cases reported in the literature and cited here the pyrene skeleton has the molecular symmetry mmm or mm2 with values for the bond lengths of the six symmetrically independent bondsa, b, c, d, e, f differing significantly in the limits of error. Mean values of a number of experimental and theoretical bond lengths are given and can be considered as standard values for the mm2 symmetric pyrene skeleton. In the case of substitution of the pyrene in 3-position with a polar heterocyclic molecule of the azomethine-imine type the mm2 symmetry vanishes, a C–H ... N intramolecular hydrogen bond arises and the directly neighbouring pyrene units are not packed parallel with their planes to each other, but they are considerably tilted. Relatively narrow intermolekular C-C contacts, 3.314 and 3.368 Å, have been observed. The conclusion is drawn that the asymmetry of the pyrene molecule and a tilt of directly neighbouring pyrene units in the crystal packing can be induced by substitution e. g. with suitable polar heterocycles.

Juli 1985.     

Calculating physical properties of organic compounds for environmental modeling from molecular structure

Mathematical models for predicting the transport and fate of pollutants in the environment require reactivity parameter values – that is the value of the physical and chemical constants that govern reactivity. Although empirical structure–activity relationships have been developed that allow estimation of some constants, such relationships are generally valid only within limited families of chemicals. The computer program, SPARC, uses computational algorithms based on fundamental chemical structure theory to estimate a large number of chemical reactivity parameters and physical properties for a wide range of organic molecules strictly from molecular structure. Resonance models were developed and calibrated using measured light absorption spectra, whereas electrostatic interaction models were developed using measured ionization pK_as in water. Solvation models (i.e., dispersion, induction, H-bonding, etc.) have been developed using various measured physical properties data. At the present time, SPARC’s physical property models can predict vapor pressure and heat of vaporization (as a function of temperature), boiling point (as a function of pressure), diffusion coefficient (as a function of pressure and temperature), activity coefficient, solubility, partition coefficient and chromatographic retention time as a function of solvent and temperature. This prediction capability crosses chemical family boundaries to cover a broad range of organic compounds.     

绿色氧化合成苯乙酮的研究

研究了以氧气为氧化剂、液相氧化乙苯合成苯乙酮反应的各种影响因素,在优化的反应条件(冰乙酸20mL、乙苯5mL、醋酸钴用量为乙苯的4.2%(物质的量)、Br/Co=2.5(物质的量)、氧气流速为100mL/min、常压、温度80℃和反应时间4h)下,乙苯转化率达到99.94%,苯乙酮收率达到98.49%.     

Spectroscopic study on the interaction between[Hg（SCN）4]2- and hemoglobin

The interaction between[Hg（SCN）₄]^2- and hemoglobin（Hb） under conditions that simulate a physiological environment was investigated by UV-vis spectroscopy,fluorescence spectroscopy,resonance Rayleigh scattering（RRS） spectroscopy and circular dichroism（CD） spectroscopy.The results obtained from the change of UV-vis and CD spectra,the quenching of Hb fluorescence and the enhancement of RRS intensity proved that a 10:1 type complex was formed between[Hg（SCN）₄]^2- and Hb.The possible mechanism suggested for the interaction was that ten Hg（SCN）₄]^2- anions entered the four subunits of a Hb molecule to react with some residues to form an adduct by coordination and electrostatic forces.The coordination of[Hg（SCN）₄]^2- with Trp was the major cause of the fluorescence quenching of Hb.     

分子沉积聚合物膜的制备及其摩擦学性能研究

以聚对磺酸钠苯乙烯(PSS)为聚阴离子、聚烯丙基氯化氨(PAH)为聚阳离子交替沉积制备了多层聚合物纳米复合膜,用热分析仪考察了这两种体相聚合物的热稳定性,采用紫外-可见光谱仪、椭圆偏振光测厚仪、接触角测量仪等分析了复合膜的性能,用DF-PM型动静摩擦系数精密测定装置考察了其摩擦学性能.结果发现,所制备的聚合物复合膜具有一定的减摩作用,原因是单晶硅表面沉积聚合物超薄膜可以降低表面的粘着力,对硅表面具有微观修饰作用,从而降低其同钢对摩时的摩擦系数;单晶硅表面分子沉积聚合物纳米复合膜的摩擦学特性同超薄膜的层数相关,沉积层数较多的超薄膜的耐磨寿命较长,并因加热处理而得到明显改善.     

Fine-tuning the molecular energy levels by incorporating thiophene units onto the π-backbone of core-expanded naphthalene diimides

A series of core-expanded naphthalene diimides (NDI-DTYM) and thiophene-based derivatives (1a-c) were designed and synthesized to investigate the relationship between molecular structures and the highest occupied molecular orbital (HOMO) energy levels but has little impact on the lowest unoccupied molecular orbital (LUMO) energy levels. The results demonstrated that increasing the number of thiophene units can gradually elevate the HOMO energy levels but had little impact on the LUMO energy levels. The n-channel organic field-effect transistors (OFETs) based on 1b and 1c have demonstrated that these almost unchanged LUMO energy levels are proper to transport electrons.     

氯化钾水溶液微观结构的分子动力学模拟研究

氯化钾水溶液不同于氯化钠的,其在低温下只能形成无水盐和冰.现有研究表明在氯化钠水溶液中不仅存在着水分子连续分布的区域与离子团簇,而且这二者的物质组成也与该溶液所形成晶体的分别对应.为了探寻其他溶液中是否存在此类对应关系,并考察溶液的微观结构,本文采用分子动力学方法对氯化钾水溶液进行了研究,表明了该溶液的一些性质.氯化钾水溶液中K⁺-K⁺和Cl^--Cl^-径向分布函数的特征具有一致性,峰的最大值所对应的位置都分别相同,明显不同于氯化钠水溶液的.系列时刻下瞬态图像内O到其最近离子距离中最大值的统计结果表明氯化钾水溶液中存在着一定大小的水分子连续分布的区域,其平均尺寸至少为2.26 nm;瞬态图像中K⁺与其最近邻Cl^-之间的距离主要分布在0.28 nm～0.38 nm之间,占比约为97.4%;溶液中存在着较大和较小两类离子团簇,较大团簇的平均尺寸为1.73nm,平均离子数是25.0,其内部的离子与周围离子之间具有与氯化钾晶体类似的结构;这些结果表明氯化钾水溶液中也...