Critical evaluation of the determination of pharmaceuticals, personal care products, phenolic endocrine disrupters and faecal steroids by GC/MS and PTV-GC/MS in environmental waters

An analytical method is described for the determination of a broad range of emerging and priority pollutants, together with sewage molecular markers in environmental waters. The step-by-step study of the GC/MS analyses focuses on the effects of experimental variables using a large volume injection (LVI) technique [a programmed temperature-vaporising (PTV) inlet], the evaluation of a clean-up step using classical and newer sorbents (i.e. Al-N, Fl, NH₂, PSA, Si, CN and DIOL), and the revision of how organic matter [i.e. humic acids (HA) content] affects method performance. Reproducibility and recoveries from spiked coastal water samples at different analyte concentrations (100, 250 and 500 ng L⁻¹) as well as with different levels of spiked humic acids (2, 10 and 20 mg L⁻¹) are reported indicating a good performance of the extraction procedure with low levels of HA (<10 mg L⁻¹). The presence of HA is a critical parameter during the solid-phase extraction (SPE) procedures. Of the clean-up sorbents tested, CN and DIOL proved most efficient in cleaning-up the extracts with recoveries in the range of 66-77% and 100-114%, respectively for the selected analytes. Both GC/MS and PTV-GC/MS instrumental configurations were tested using final sewage effluents, riverine, estuarine and coastal water samples. However, limited applicability of the PTV inlet is reported for environmental applications, affording only a modest improvement in chromatographic signal-to-noise ratios.     

Metal-organic chains constructed from pre-organized N2S2 donor ligands

Three new N₂S₂ donor ligands 1,1′-((2-(2-(phenylthio)phenylthio)phenyl)methylene)bis(3,5-R-1H-pyrazole), R = H (L^H), R = Me (L^Me), R = i-Pr (L^i-Pr) have been prepared and characterized. These bifunctional ligands incorporate two distinct chelate donor systems, by virtue of the presence of bispyrazole and bisthioether functions. The preferred conformation of these ligands is such that the N₂ and S₂ donor moieties may be oriented in opposite directions, thus favoring the formation of molecular chains when treated with AgBF₄. The X-ray structures of Ag(I) complexes show that, depending on the steric hindrance present on the pyrazole rings, these ligands behave as κ⁴-SSNN-μ bridging tetradentate (when R = H), or κ³-SNN-μ bridging tridentate (when R = Me, i-Pr). Interestingly, [Ag(L^H)]BF₄ crystallizes in the chiral space group P4₁, with the molecular chain that is folded around the 4₁ screw axis.     

Theoretical study of the structural,spectroscopic and energetic properties of difluoro(germylthio)phosphine and difluoro(germylseleno)phosphine in the gas phase

Theoretical methods have been employed to investigate the structural, spectroscopic and energetic properties of difluoro(germylthio)phosphine in the C_s symmetry in the gas phase. The levels of theory used are MP2 and DFT/B3LYP and the basis set used for all atoms is 6-311G(d,p). The computed structural parameters, namely, bond lengths and bond angles and spectroscopic parameters, namely, infrared frequencies, Raman activities and NMR chemical shifts have been compared with experimental data reported in literature. The structure of this compound has been analysed using natural bond orbital approach. Both the ab initio methods perform satisfactorily when the predicted and experimental parameters are compared. We have extended this study, using the same methods and basis set, to the selenium analogue, namely, difluoro(germylseleno)phosphine for which literature is elusive. The MP2/6-311G(d,p) geometrical parameters for difluoro(germylseleno)phosphine are: r(P–Se) = 2.270, r(Ge-Se) = 2.386, r(P–F) = 1.604, r(Ge–H) = 1.530 Å, ∠(Ge–Se–P) = 91.4, ∠(F–P–F) = 96.7, ∠(Se–P–F) = 99.9 and ∠(Se–Ge–H) = 109.5°. Apart from these, we have also studied the energetic parameters for their synthesis. The results indicate that formation of the sulphur-containing compound is favoured thermodynamically.     

The conductance and stability of fused dithia-heterocyclic compounds contacted with gold and platinum electrodes

The electronic transport properties of two kinds of fused dithia-heterocyclic compounds, 2,3,6,7-tetrahydrobenzo[1,2-b:4,5-b′]dithiophene (THBDT) and benzo[1,2-b:4,5-b]dithiophene (BDT), connected to gold and platinum electrodes are investigated using a self-consistent abinitio approach that combines the non-equilibrium Green’s function formalism with density functional theory. Our calculations show that the transmission at the Fermi level of the Au–THBDT–Au junction, where the THBDT molecule is connected to two gold electrodes through a gold adatom on each side, is 3.1 × 10⁻², in good agreement with the experimentally measured value (1.2 × 10⁻²). Replacement of the gold electrodes with platinum electrodes can improve the junction stability but cannot increase the zero-bias junction conductance. In contrast, due to the enhanced conjugation in BDT and the better molecule–electrode coupling, both the transmission and the stability of the Pt–BDT–Pt junction are improved significantly, demonstrating the close relation between the device performance and the device structure.     

Evaluation of selective composite cryogel for bromate removal from drinking water

Bromate, which is a potential carcinogen, should be removed from drinking water to levels of less than 10 μg/L. A chitosan‐based molecularly imprinted polymer (MIP) and a sol–gel ion‐exchange double hydrous oxide (Fe₂O₃·Al₂O₃·xH₂O) adsorbent (inorganic adsorbent) were prepared for this purpose. The sorption behavior of each adsorbent including sorption kinetics, isotherms, effect of pH and selective sorption were investigated in detail. Sorption experimental results showed that the MIP adsorbents had better selectivity for bromate, even in the presence of high concentrations of nitrate, as compared to the inorganic adsorbent. It was found that pH does not affect the adsorption of bromate when using the inorganic adsorbent. Additionally, both adsorbents were immobilized in a polymeric cryogel inside plastic carriers to make them more practical for using in larger scale. Regeneration of the cryogels either containing MIP or inorganic adsorbents were carried out by 0.1 M NaOH and 0.1 M NaCl, respectively. It was found that the regenerated MIP and inorganic adsorbents could be used at least three and five times, respectively, without any loss in their sorption capacity.     

Achiral and chiral separations using MEKC,polyelectrolyte multilayer coatings,and mixed mode separation techniques with molecular micelles

Mixed mode (MM) separation using a combination of MEKC and polyelectrolyte multilayer (PEM) coatings is herein reported for the separation of achiral and chiral analytes. Many analytes are difficult to separate by MEKC and PEM coatings alone. Therefore, the implementation of a MM separation provides several advantages for overcoming the limitations of these well‐established methods. In this study, it was observed that achiral separations using MEKC and PEM coatings individually resulted in partial resolution of eight very similar aryl ketones when the molecular micelle (sodium poly(N‐undecanoyl‐L ‐glycinate)) concentration was varied from 0.25 to 1.00% w/v and the bilayer number varied from 2 to 4. However, when MM separation was introduced, baseline resolution was achieved for all eight analytes. In the case of chiral separations, temazepam, aminoglutethimide, benzoin, benzoin methyl ether, and coumachlor were separated using the three separation techniques. For chiral separations, the chiral molecular micelle, sodium poly(N‐undecanoyl‐L ‐leucylvalinate), was employed at concentrations of 0.25–1.50% w/v for both MEKC and PEM coatings. Overall, the results revealed partial separation with MEKC and PEM coatings individually. However, MM separation enabled baseline separation of each chiral mixture. The separation of achiral and chiral compounds from different compound classes demonstrates the versatility of this MM approach.     

Surface diffusion in reversed-phase liquid chromatography

More than 40 years ago, Giddings pointed out in “Dynamics of Chromatography” that surface diffusion should become an important research topic in the kinetics of chromatographic phenomena. However, few studies on surface diffusion in adsorbents used in chromatography were published since then. Most scientists use ordinary rate equations to study mass transfer kinetics in chromatography. They take no account of surface diffusion and overlook the significant contributions of this mass transfer process to chromatographic behavior and to column efficiency at high mobile phase flow rate. Only recently did the significance of surface diffusion in separation processes begin to be recognized in connection with the development of new techniques of fast flow, high efficiency chromatography. In this review, we revisit the reports on experimental data on surface diffusion and introduce a surface-restricted molecular diffusion model, derived as a first approximation for the mechanism of surface diffusion, on the basis of the absolute rate theory. We also explain how this model accounts for many intrinsic characteristics of surface diffusion that cannot properly be explained by the conventional models of surface diffusion.     

Synthesis and application of multi-walled carbon nanotubes-molecularly imprinted sol-gel composite material for on-line solid-phase extraction and high-performance liquid chromatography determination of trace Sudan IV

A novel composite material of multi-walled carbon nanotubes (MWNTs)-Sudan IV molecularly imprinted polymers (MIPs) was prepared by surface molecular imprinting technique in combination with sol-gel technology. The MWNTs-MIPs were evaluated by scanning electron micrograph (SEM), Fourier transform infrared spectroscopy (FT-IR), and adsorption experiments. The results showed that the MWNTs-MIPs exhibited good selective recognition to Sudan IV. The maximum saturated binding capacity (Q_max) is 63.2 μmol g⁻¹. Applied as sorbent, the MWNTs-MIPs were used for the determination of trace Sudan IV in chilli powder by on-line solid-phase extraction-high-performance liquid chromatography (SPE-HPLC). The results showed that an enrichment factor of 741 was achieved with a loading flow rate of 1.0 mL min⁻¹ for sampling 50 mL. The MWNTs-MIPs provided a fast and convenience determination platform for Sudan IV in real samples.