Photoinduced electron transfer at liquid|liquid interfaces. Part VII. Correlation between self-organisation and structure of water-soluble photoactive species

The self-organisation of a variety of dyes at the water|1,2-dichloroethane interface was studied by admittance measurements, photocurrent–potential curves and light polarisation anisotropy of the photocurrent. The heterogeneous photo-oxidation of ferrocene was studied at interfaces sensitised by Sn(IV) meso-tetra-(4-carboxyphenyl) porphyrin dichloride (SnTPPC), chlorin e-6, protoporphyrin IX (protoIX) and Fe(III) protoporphyrin IX chloride (Fe-protoIX). Cyclic voltammograms and capacitance voltage curves exhibit different features associated with the self-assembly of the dye species at the liquid|liquid boundary. In the case of SnTPPC, the capacitance curves displayed the characteristic responses commonly associated with the specific adsorption of ionic species. On the other hand, chlorin e-6, protoIX and Fe-protoIX show rather complex behaviour suggesting not only changes in the excess charge but also in the dielectric permittivity of the interface. Differences in the photocurrent efficiency were also observed under the same experimental conditions. The relative magnitude of the photocurrent responses were rationalised in terms of the phenomenological electron transfer rate constant, the photon capture cross-sections and the lifetime of the triplet state as obtained from nanosecond flash photolysis. Finally, the average molecular orientation of the adsorbed photoactive species was estimated from the photocurrent dependence on the angle of light polarisation in total internal reflection. The results show a clear correlation between the orientation of the transition dipole and the distribution of the peripheral carboxyl groups responsible for the hydrophilic nature of the dyes.     

Development in the area of UV-crosslinkable solvent-based pressure-sensitive adhesives with excellent shrinkage resistance

Solvent-based UV-crosslinkable pressure-sensitive adhesives (PSA) present a new class of products that offers the potential to produce a novel generation of ultraviolet cured self-adhesive products with excellent shrinkage resistance. A variety of solvent-based pressure-sensitive adhesives were prepared by synthesis in ethyl acetate with solid content on 50 wt.% with 2-ethylhexyl acrylate, methyl acrylate, acrylic acid, N-vinyl caprolactam and unsaturated photoinitiators: 4-acryloyloxy benzophenone, allyl benzoine and phenyl-(1-acryloyloxy)-cyclohexyl ketone. The main emphasis is given to the influence of viscosity and molecular mass of synthesized adhesive on their shrinkage. Further trials show the effect of the UV-crosslinking process with UV-lamp and comparison with acrylics PSA crosslinked with metal chelates aluminium acetylacetonate and titanium acetylacetonate on shrinkage. Further examinations describe the influence of various factors such as UV exposure time and UV dose on very relevant PSA performance such as shrinkage on coated PVC carrier.     

On the calculation of arbitrary multielectron molecular integrals over Slater‐type orbitals using recurrence relations for overlap integrals. III. Auxiliary functions \documentclass{article}\pagestyle{empty}\begin{document}$Q_{nn'}^{q}$\end{document} and \documentclass{article}\pagestyle{empty}\begin{document}$G_{-nn'}^{q}$\end{document}

The auxiliary functions $Q_{nn'}^{q}(p,pt)$ and $G_{-nn'}^{q}(p_{a},p,pt)$ which are used in our previous paper [Guseinov, I. I.; Mamedov, B. A. Int J Quantum Chem 2001, 81, 117] for the computation of multicenter electron‐repulsion integrals over Slater‐type orbitals (STOs) are discussed in detail, and the method is given for their numerical computation. The present method is suitable for all values of the parameters p_a, p, and pt. Three‐ and four‐center electron‐repulsion integrals are calculated for extremely large quantum numbers using relations for auxiliary functions obtained in this paper. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Molecular modeling of cytochrome P450 3A4

The three-dimensional structure of human cytochrome P450 3A4 was modeled based on crystallographic coordinates of four bacterial P450s: P450 BM-3, P450cam, P450terp, and P450eryF. The P450 3A4 sequence was aligned to those of the known proteins using a structure-based alignment of P450 BM-3, P450cam, P450terp, and P450eryF. The coordinates of the model were then calculated using a consensus strategy, and the final structure was optimized in the presence of water. The P450 3A4 model resembles P450 BM-3 the most, but the B helix is similar to that of P450eryF, which leads to an enlarged active site when compared with P450 BM-3, P450cam, and P450terp. The 3A4 residues equivalent to known substrate contact residues of the bacterial proteins and key residues of rat P450 2B1 are located in the active site or the substrate access channel. Docking of progesterone into the P450 3A4 model demonstrated that the substrate bound in a 6-orientation can interact with a number of active site residues, such as 114, 119, 301, 304, 305, 309, 370, 373, and 479, through hydrophobic interactions. The active site of the enzyme can also accommodate erythromycin, which, in addition to the residues listed for progesterone, also contacts residues 101, 104, 105, 214, 215, 217, 218, 374, and 478. The majority of 3A4 residues which interact with progesterone and/or erythromycin possess their equivalents in key residues of P450 2B enzymes, except for residues 297, 480 and 482, which do not contact either substrate in P450 3A4. The results from docking of progesterone and erythromycin into the enzyme model make it possible to pinpoint residues which may be important for 3A4 function and to target them for site-directed mutagenesis.     

The solvation of Li and Na in acetonitrile from ab initio-derived many-body ion–solvent potentials

Several Li⁺- and Na⁺-acetonitrile models were derived from ab initio calculations at the counterpoise-corrected MP2/TZV++(d,p) level for distorted ion-(MeCN)_n clusters with n=1, 4 and 6. Two different many-body ion-acetonitrile models were constructed: an effective three-body potential for use with the six-site effective pair model of Böhm et al., and an effective polarizable many-body model. The polarizable acetonitrile model used in the latter model is a new empirical model which was also derived in the present paper. Mainly for comparative purposes, two ion-acetonitrile pair potentials were also constructed from the ab initio cluster calculations: one pure pair potential and one effective pair potential. Using all these potential models, MD simulations in the NPT ensemble were performed for the pure acetonitrile liquid and for Li⁺(MeCN) and Na⁺(MeCN) solutions with 1 ion in 512 solvent molecules and with a simulation time of at least 120 ps per system. Thermodynamic properties, solvation-shell structure and the self-diffusion coefficient of the ions and of the solvent molecules were calculated and compared between the different models and with experimental data, where available. The Li⁺ ion is found to be four-coordinated when the new many-body potentials are used, in contrast to the six-coordinated structure obtained for the pure pair and effective pair potentials. The coordination number of Na⁺ is close to six for all the models derived here, although the coordination number becomes slightly smaller with the many-body potentials. For both ions, the solvent molecules in the first shell point their nitrogen ends towards the cation, while in the second shell the opposite orientation is the most common.     

Synthesis and network structure of ionic poly(N,N-dimethylacrylamide-co-acrylamide) hydrogels: Comparison of swelling degree with theory

At four different charge densities, ionic hydrogels based on N,N-dimethylacrylamide (DMAAm), acrylamide (AAm), and itaconic acid (IA) were synthesized by free-radical cross-linking copolymerization in water with N,N-methylenebis(acrylamide) (BAAm) as the cross-linker, ammonium persulfate (APS) as the initiator, and N,N,N′,N′-tetramethylenediamine (TEMED) as the activator. The swelling behaviors of these hydrogels were analyzed in buffer solutions at various pH. It was observed that the swelling behavior of cross-linked ionic poly(N,N-dimethylacrylamide-co-acrylamide) [P(DMAAm-co-AAm)] hydrogels at different pHs agreed with the modified Flory-Rehner equation based both on the phantom network and affine network models and the ideal Donnan theory. In addition, the kinetics of swelling of the hydrogels was studied in pH 2, 5 and 9 buffer solutions. The swelling curves exhibited the characteristic features of transport process, apparently the Fickian diffusion of fast rates.     

Electropolymerized Pyrrole‐Substituted Manganese Phthalocyanine Films for the Electroassisted Biomimetic Catalytic Reduction of Molecular Oxygen

We report for the first time on the electroassisted biomimetic activation of molecular oxygen by a newly prepared electropolymerized polypyrrole‐manganese phthalocyanine film. The prepared films and their intervention in the electroassisted catalytic reduction of molecular oxygen were analyzed by cyclic voltammetry and UV‐visible spectrophotometry on optically transparent electrodes. The obtained results demonstrate the probable existence of the key‐steps responsible for the suggested formation of the highly reactive manganese oxo intermediate.     

DNAzyme amplification of molecular beacon signal

This paper reports an improved catalytic molecular beacon. Addition of the target oligonucleotide activates a DNA enzyme (DNAzyme), which, in turn, activates multiple copies of molecular beacons (MB) and gives rise to a strong fluorescence signal. In a previous design, the activated DNAzyme could oligomerize, especially dimerize, and result in inactivation of the DNAzyme. The current design avoids this problem, upon activated by the target DNA, the DNAzyme will stay constantly active. With the improved method, a detection of 10 pM DNA has been demonstrated, which is 1000 times more sensitive than the method previously reported.