Gemini表面活性剂分子结构对其水溶液中聚集行为的影响

Gemini表面活性剂是通过联接基团将两个具有亲水亲油性质的两亲结构单元在其亲水头基上或靠近亲水头基处以共价键方式连接而成的一类表面活性剂。这类表面活性剂由于联接基团的引入具有比传统单链表面活性剂更高的表面活性,同时分子结构中更多的可调控因素使其在水溶液中表现出更为丰富的自聚集行为,而且分子不同部位结构的改变对分子内或分子间相互作用产生不同的影响,可实现通过分子结构的设计有效调控其自聚集能力和聚集体结构。本综述将从联接基团、烷基链、亲水头基、反离子和其它功能性基团这五个方面概述近些年Gemini表面活性剂水溶液中聚集行为方面的研究进展,总结人们对Gemini表面活性剂分子间相互作用规律的认识,期望对于进一步发展这类高效的表面活性剂体系提供有益的帮助。     

Efficient free energy calculation of water across lipid membranes

An efficient free energy (FE) calculation of a water molecule to go across lipid membranes is presented. Both overlapping distribution and cavity insertion Widom methods are complementarily used. The former is useful for a dense region where water molecules are found, i.e., from the interfacial to bulk water region, while the latter works well in the low density region, i.e., the hydrocarbon region. Since both methods evaluate the excess chemical potential of water, the obtained FE profile is free from the fitting problem usually arisen when a FE difference method is used. A diphytanyl phosphatidylcholine bilayer is used for our test calculations. An excellent and fast convergence of the chemical potential is obtained when each method is applied for the appropriate region. The estimated FE barrier using the Ewald method for the electrostatic interaction is approximately 7.2 kcal/mol, which is higher than that using the interaction cutoff of 20 A by about 0.9 kcal/mol.     

On the Validity of Stokes–Einstein and Stokes–Einstein–Debye Relations in Ionic Liquids and Ionic‐Liquid Mixtures

Stokes–Einstein (SE) and Stokes–Einstein–Debye (SED) relations in the neat ionic liquid (IL) [C₂mim][NTf₂] and IL/chloroform mixtures are studied by means of molecular dynamics (MD) simulations. For this purpose, we simulate the translational diffusion coefficients of the cations and anions, the rotational correlation times of the C(2)? H bond in the cation C₂mim⁺, and the viscosities of the whole system. We find that the SE and SED relations are not valid for the pure ionic liquid, nor for IL/chloroform mixtures down to the miscibility gap (at 50 wt % IL). The deviations from both relations could be related to dynamical heterogeneities described by the non‐Gaussian parameter α(t). If α(t) is close to zero, at a concentration of 1 wt % IL in chloroform, both relations become valid. Then, the effective radii and volumes calculated from the SE and SED equations can be related to the structures found in the MD simulations, such as aggregates of ion pairs. Overall, similarities are observed between the dynamical properties of supercooled water and those of ionic liquids.     

Liquid interfacial nanoarchitectonics: Molecular machines,organic semiconductors,nanocarbons, stem cells,and others

The concept of nanoarchitectonics has been proposed as an extensional development of nanotechnology through fusions with material science and the other fields. In nanoarchitectonics, nano-units of atoms, molecules, and nanomaterials are architected into construction of functional material systems. In order to assemble intended structures or hierarchical structures from nano-units, it is more useful to confine nano-units at the interface. In addition, nanoarchitectonics is expected to output functions by harmonizing many units in dynamic environments. However, the liquid interfaces still have lots of unexplored matters in nanoscale because supports by advanced apparatus and techniques in nanotechnology are not always available. Specifically, this review paper summarizes examples of research on molecular manipulation, molecular arrangement and assembly, materials synthesis, and life manipulation at the liquid interface. These examples demonstrate that the liquid interface enables the control of dynamic functions of various size regions, from molecular-level phenomena such as the control of molecular machines to techniques of living creature size such as the control of stem cell differentiation. Liquid interfaces are very useful environments for controlling dynamic functions for a wide range of targets and would have tremendous potential in terms of functional exploration. The great potential of nanoarchitectonics at the liquid interface and the challenges to be solved in the future are also discussed.     

The Story of the Little Blue Box: A Tribute to Siegfried Hünig

The tetracationic cyclophane, cyclobis(paraquat-p-phenylene), also known as the little blue box, constitutes a modular receptor that has facilitated the discovery of many host–guest complexes and mechanically interlocked molecules during the past 35 years. Its versatility in binding small π-donors in its tetracationic state, as well as forming trisradical tricationic complexes with viologen radical cations in its doubly reduced bisradical dicationic state, renders it valuable for the construction of various stimuli-responsive materials. Since the first reports in 1988, the little blue box has been featured in over 500 publications in the literature. All this research activity would not have been possible without the seminal contributions carried out by Siegfried Hünig, who not only pioneered the syntheses of viologen-containing cyclophanes, but also revealed their rich redox chemistry in addition to their ability to undergo intramolecular π-dimerization. This Review describes how his pioneering research led to the design and synthesis of the little blue box, and how this redox-active host evolved into the key component of molecular shuttles, switches, and machines.     

Enabling the Operation of Highly Compatible LiI-3-Hydroxypropionitrile Small-Molecule Solid-State Electrolytes in Lithium Metal Batteries via Stepped-Amorphization Strategy

Integrating the advantages of both inorganic ceramic and organic polymer solid-state electrolytes, small-molecule solid-state electrolytes represented by LiI-3-hydroxypropionitrile (LiI-HPN) inorganic–organic hybrid systems possess good interfacial compatibility and high modulus. However, their lack of intrinsic Li⁺ conduction ability hinders potential application in lithium metal batteries until now, despite containing LiI phase composition. Herein, inspired by evolution tendency of ionic conduction behaviors together with first-principles molecular dynamics simulations, we propose a stepped-amorphization strategy to break the Li⁺ conduction bottleneck of LiI-HPN. It involves three progressive steps of composition (LiI-content increasing), time (long-time standing), and temperature (high-temperature melting) regulations, to essentially construct a small-molecule-based composite solid-state electrolyte with intensified amorphous degree, which realizes efficient conversion from an I⁻ to Li⁺ conductor and improved conductivity. As a proof, the stepped-optimized LiI-HPN is successfully operated in lithium metal batteries cooperated with Li₄Ti₅O₁₂ cathode to deliver considerable compatibility and stability over 250 cycles. This work not only clarifies the ionic conduction mechanisms of LiI-HPN inorganic–organic hybrid systems, but also provides a reasonable strategy to broaden the application scenarios of highly compatible small-molecule solid-state electrolytes.     

Cover Picture: Supramolecular Self-Assembly as a Tool To Preserve the Electronic Purity of Perylene Diimide Chromophores (Angew. Chem. Int. Ed. 12/2023)

Organic semiconductors are promising for efficient, printable optoelectronics. However, strong excited-state quenching due to uncontrolled aggregation limits their use in devices. We report on the self-assembly of a supramolecular pseudo-cube formed from six perylene diimides (PDIs). The rigid, shape-persistent cage sets the distance and orientation of the PDIs and suppresses intramolecular rotations and vibrations, leading to non-aggregated, monomer-like properties in solution and the solid state, in contrast to the fast fluorescence quenching in the free ligand. The stabilized excited state and electronic purity in the cage enables the observation of delayed fluorescence due to a bright excited multimer, acting as excited-state reservoir in a rare case of benign inter-chromophore interactions in the cage. We show that self-assembly provides a powerful tool for retaining and controlling the electronic properties of chromophores, and to bring molecular electronics devices within reach.     

Understanding Conformational Properties and Role of Hydrogen Bonds in Glycosaminoglycans-Interleukin8 Complexes in Aqueous Medium by Molecular Dynamics Simulation

Atomistic molecular dynamics simulations were performed under ambient conditions to explore the conformational features and binding affinities of hexameric glycosaminoglycans (GAGs) with chemokine Interleukin8 (IL8) in an aqueous medium. We tried to understand the role of hydrogen bonds (HBs) involving conserved water in mediating the interactions. The Luzar-Chandler model was adopted to study the kinetics of HB breaking and formation concerning different water-mediated HBs. The conformational flexibilities of bound GAGs are due to the flexible glycosidic linkages than the occasional/rare ring pucker conformation. The free energy landscape constructed with ϕ, and ψ, depicted that different conformational minima associated with the glycosidic linkage flexibility of the GAGs in bound states are separated by energy barriers. The binding affinities of IL8 towards GAGs are favored through the electrostatic and non-polar solvation interactions. 4-different types of conserved water were explored in the solvent-mediated binding of GAGs with IL8. The average lifetime of the IL8-GAG direct HB pairs was ∼ten times less than the IL8-GAG-shared water HBs. This is due to the rapid establishment of HB breaking and reformation kinetics involving water of a shared layer. We find that despite the highly negatively charged surface of GAGs, the IL8 surface populated by non-cationic amino acids could serve as a promising binding site in addition to the cationic surface of the protein.     

The Gaussian and augmented-plane-wave density functional method for ab initio molecular dynamics simulations

A new algorithm for density-functional-theory-based ab initio molecular dynamics simulations is presented. The Kohn–Sham orbitals are expanded in Gaussian-type functions and an augmented-plane-wave-type approach is used to represent the electronic density. This extends previous work of ours where the density was expanded only in plane waves. We describe the total density in a smooth extended part which we represent in plane waves as in our previous work and parts localised close to the nuclei which are expanded in Gaussians. Using this representation of the charge we show how the localised and extended part can be treated separately, achieving a computational cost for the calculation of the Kohn–Sham matrix that scales with the system size N as O(NlogN). Furthermore, we are able to reduce drastically the size of the plane-wave basis. In addition, we introduce a multiple-cutoff method that improves considerably the performance of this approach. Finally, we demonstrate with a series of numerical examples the accuracy and efficiency of the new algorithm, both for electronic structure calculations and for ab initio molecular dynamics simulations. Received: 15 December 1998 /Accepted: 18 February 1999 /Published online: 14 July 1999