Molecular-shape recognition of polycyclic aromatic hydrocarbons in reversed phase liquid chromatography

Summary The molecular-shape recognition of polycyclic aromatic hydrocarbons has been studied on various stationary phases in reversed-phase high-performance liquid chromatography. The examined stationary phases were phenyl-, diphenyl-, triphenyl- and benzyl-bonded silicas. The results of regression analysis inidcated that triphenylsilica is the best packing material to recognize the difference in the molecular-shape of structural isomers. This fact was confirmed by the separation of 4-ring isomers.     

EFFECT OF MOLECULAR WEIGHT OF PDMS ON MORPHOLOGY AND MECHANICAL PROPERTIES OF PP/PDMS BLENDS

 A series of polydimethylsiloxane (PDMS) with varied molecular weights (Mw = 3  106, 1  106 and 0.5  106) were melt blended with PP to investigate the effect of PDMS molecular weight (MW) on the morphology and mechanical properties of PP/PDMS blends. Scanning electron microscopic (SEM) examination showed that the size of PDMS domains was dependent on the MW of PDMS. It was found that the lower the value of PDMS MW, the better dispersion of the PDMS domains in the PP matrix. Tensile and Izod impact tests revealed that the addition of PDMS with lower MW would lead to a more significant increase in impact strength of the blends compared with the blends with higher MW ones, while the influence of the molecular weight on tensile strengths of the blends was relatively small in the MW range studied. Differential scanning calorimetry (DSC) results also showed that the crystallization temperature of PP was increased with decreasing PDMS MW, indicating a better nucleation capability of lower MW of PDMS. Melting flow rate (MFR) measurements indicated that the processibility of PP could be enhanced by adding PDMS, and again the lower MW PDMS resulted in better data. Our work demonstrates that not only the processibility but also the mechanical properties of PP could be enhanced to a more significant degree by using low MW PDMS than the higher ones.     

取代苯系列衍生物电子结构与毒性关系的量子化学研究

取代苯系列衍生物电子结构与毒性关系的量子化学研究苏忠民，徐贤姬，李金昶（东北师范大学化学系，长春，１３００２４）赵宝忠，盛连喜（东北师范大学环科系，长春，１３００２４）关键词：取代苯衍生物，分子毒性，ＭＮＤＯ采用量子化学半经验ＡＭＩ、ＭＮＤＯ方法，从...     

Thermodynamics of molecular interactions in ethyl iodide+toluene mixtures

The excess Gibb's free energy of mixing, G^E, for ethyl iodide+toluene at 25°C have been obtained from the measured vapor pressuure data. The H^E and G^E values for ethyl iodide+toluene are positive throughout the ethyl iodide concentration range and G^E>H^E. The results have been analyzed in terms of Flory and ideal associated model theory of nonelectrolyte solutions. It has been observed that the ideal associated model approach which assumes the presence of AN and A₂B molecular species describes well (within±10 J-mol^–1 in the worst case) the general dependence of H^E on X_A (mole fraction of ethyl iodide) over the whole composition range for ethyl iodide+toluene mixtures. The equilibrium constants for A+A AB and 2A+BA₂B reactions along with the enthalpies of formation of AB and A₂B molecular species have been calculated.     

Synthesis and Structure of(NH4)_2 [V2O_4(OCH_2COO)_2]

ＳｙｎｔｈｅｓｉｓａｎｄＳｔｒｕｃｔｕｒｅｏｆ（ＮＨ４）２［Ｖ２Ｏ４（ＯＣＨ２ＣＯＯ）２］ＺＨＯＵＺｈａｏ－ｈｕｉ，ＷＡＮＧＪｉｎｚｈｉ，ＷＡＮＨｕｉ－ｌｉｎａｎｄＴＳＡｌＫｈｉ－ｒｕｉ（ＤｅｐａｒｔｍｅｎｔｏｆＣｈｅｍｉｓｔｒｙ，ＸｉａｍｅｎＵｎｉ...     

分子量对聚丙烯等温结晶的影响

<正> 在高聚物结晶动力学的研究中,分子量对结晶速率的影响是一个有实际意义和理论兴趣的研究课题,由于聚烯烃可以得到分子量变化范围相当宽(MW从10~3到10~6)的试样,因而它是研究结晶速率分子量依赖性较合适的对象,其中研究最多的是聚乙烯和聚丙烯。从前入的研究报道看来,影响聚丙烯结晶速率的因素比聚乙烯要复杂。除了聚丙烯可生成多种晶型结构,会影响其结晶速率以外,用不同聚合方法制备的试样,由于其链结     

Molecular and nanoscale materials and devices in electronics

Over the past several years, there have been many significant advances toward the realization of electronic computers integrated on the molecular scale and a much greater understanding of the types of materials that will be useful in molecular devices and their properties. It was demonstrated that individual molecules could serve as incomprehensibly tiny switch and wire one million times smaller than those on conventional silicon microchip. This has resulted very recently in the assembly and demonstration of tiny computer logic circuits built from such molecular scale devices. The purpose of this review is to provide a general introduction to molecular and nanoscale materials and devices in electronics.     

Electron-transfer in molecular functional materials

We discuss electron-transfer processes that govern the physics of several materials or systems of interest for advanced applications. The discussion touches upon several topics, ranging from solvatochromism to solvent-induced symmetry breaking, from excitonic to cooperative effects in molecular crystals, from phase transitions to vibrational contributions to the dielectric constant in organic materials, from spectroscopy to molecular transport. In all these diverse systems electron transfer (ET) plays a major role and is discussed with reference to simple models for delocalized charges.     

PdH2、YH2分子的结构与势能函数

用密度泛函理论的B3LYP方法,对钯和钇原子采用SDD收缩价基函数,氢原子采用6-311＋＋G**全电子基函数,对PdH2和YH2体系的结构进行优化计算,得到PdH2分子最稳态为C2v构型,电子组态为1A1,平衡核间距RPdH=0.1692 nm,键角∠HPdH=29.4°,离解能De=5.5212 eV,基态简正振动频率:ν1(b2)=1470.1 cm－1、ν2(a1)=1007.9 cm－1、ν3(a1)=2907.0 cm－1.YH2分子最稳态也为C2v构型,电子组态2A1,RYH=0.1962 nm,∠HYH=114.3°,De=5.6691 eV,基态简正振动频率:ν1(b2)=1457.9 cm－1、ν2(a1)=476.0 cm－1、ν3(a1)=1506.3 cm－1.由微观过程的可逆性原理分析了分子的可能离解极限.并用多体项展式理论方法分别导出基态PdH2和YH2分子的势能函数,其等值势能面图准确地再现了PdH2和YH2分子的结构特征和离解能,由此讨论了Pd ＋ H2和Y ＋ H2分子反应的势能面静态特征.