自旋交叉配合现象与分子电子器件

自旋交叉配合物在热、压力或光诱导自旋交叉现象的同时会伴随着其它一些协同效应，比如配合物颜色的改革、存在着大的热滞后效应等，这些协同效应是单个分子或分子集合体作为热开关、光开关和信息存储元件材料的基础。因此，自旋交叉配合物是开发新型的热开关、光开关和信息存储元件材料的理想分子体系。本文概述了自旋交叉现象的研究历史、现状和未来的发展趋势。讨论了影响配合物自旋交叉性质的各种内在的和外部的因素，总结了目前用于研究自旋交叉现象的各种现代测试技术。最后，展望了自旋交叉配合物在分子电子器件方面的应用前景。     

Water bridges are essential to neonicotinoids: Insights from synthesis,bioassay and molecular modelling studies

To identify the detailed roles of water bridges in neonicotinoids recognition, twenty-four neonicotinoids compounds were designed, synthesized, bioassayed and modelled. Of all nine fragments mimicking water bridges, cyano group was the optimal one. The insecticidal activities indicated that the water bridge might be stable in the active site and was not suitable to be replaced by other groups, which highlighted the significance of water bridges for neonicotinoids.     

应用分子图形学、分子力学、量子化学及静电势研究农药分子结构与性能关系(X)──磺酰脲分子内旋转通道的分子力学研究

磺酞豚分子是一类极其重要的低毒超高效除草剂，有着十分重要的用途．研究分子的空间结构对于了解分子的构效关系十分重要．最近，我们测定的一系列分子的晶体结构［‘－’1表明，分子1、2、3晶体结构的空间群分别为PZ；儿、Pz、Pz，说明晶体中分别有对称元素（对称面或者对称中心），分子以对映体的形式存在于晶体中．由于磺酸豚分子本身不存在手性原子，由此推断磺酷服分子在晶体中存在的对映异构体是由内旋转阻碍产生的，因而应是构象异构体．本项研究工作的目的是应用分子力学方法，计算阻碍内旋转的能垒，从而找出分子内旋转时的最低…     

聚合物连续分级

本文较系统地介绍了聚合物连续分级的理论基础、实验室装置及其实际应用。     

拟除虫菊酯筛选及分子设计

综述了拟除虫菊酯的进展及新拟除虫菊酯的筛选和分子设计的方法等。参考文献５８篇。     

Local elevation: A method for improving the searching properties of molecular dynamics simulation

Summary The concept of memory has been introduced into a molecular dynamics algorithm. This was done so as to persuade a molecular system to visit new areas of conformational space rather than be confined to a small number of low-energy regions. The method is demonstrated on a simple model system and the 11-residue cyclic peptide cyclosporin A. For comparison, calculations were also performed using simulated temperature annealing and a potential energy annealing scheme. Although the method can only be applied to systems with a small number of degrees of freedom, it offers the chance to generate a multitude of different low-energy structures, where other methods only give a single one or few. This is clearly important in problems such as drug design, where one is interested in the conformational spread of a system.     

Crystal and Molecular Structures of Two Derivatives of 1, 3a, 5-Trisubstituted-3a ,4,5,11-Tetrahydro-1,2,4-Oxadiazolino[5,4-d] [1, 5]Benzothiazepine

The structures of two derivatives of the title compound [C24H22N2OS, Mr = 386. 5 for (1); C25H22N2O3S, Mr = 430. 5 for (2)] were determined by using X-ray single-crystal strcuture analysis method. The final discrepancies are R = 0. 071 and 0. 077, respectively, for the reflections measured on a four-circle diffractometer. The space group for compound (1) is P bca with a=1. 6639(4), b=2.0286(3), c= 1.1742(1) nm, V = 3. 964(1) nm3, F(000) = 1632 e, Z=8; and (2) belongs to P21/n space group, and the cell dimensions are a=1. 1115(4), b=0. 8932(7), c=2. 186(3) nm, β=97. 52 (1)°? V=2.151(4) nm3, F(000) = 904 e, Z=4.The molecular backbones are very similar, each is a tricyclic system. The central seven-membered ring is in a twisted-boat conformation, and is cis-fused to 1,2,4-oxa-diazolino ring, while the latter moiety is in an envelope form. There are conjugated but non-coplanar effects in each structure. All bond lengths and angles in the molecules are normally acceptable. The crystal structure on the whol     

聚丙烯酰胺/醋酸铬与聚丙烯酰胺/酚醛胶态分散凝胶的纳米颗粒自组织分形结构

采用原子力显微镜 ,分别对无机交联体系聚丙烯酰胺 Cr3+ 和有机交联体系聚丙烯酰胺 酚醛胶态分散凝胶的微观结构进行了显微图像分析 .发现无论是在有机还是无机交联体系中 ,也无论聚丙烯酰胺和交联剂浓度如何变化 ,在微米尺度上最终形成的都是具有自相似性的树枝状分形图像 ,在更小尺度上则发现单个小树杈分形体都是由纳米级的颗粒紧密堆积而成 .在所研究的胶态分散凝胶体系中 ,树枝状分形结构的形成及其具体的形态取决于聚丙烯酰胺的浓度 ,而交联剂的有无及其多少只对树枝状凝胶分形的几何形态产生一定影响 .实验结果还表明纳米级 (≤ 10 0nm)的胶体颗粒构成的分形结构的凝胶其弹性模量G′比微米级的高出一个数量级 .且粒子尺度越小 ,则凝胶的力学稳定性越强     

腈菌唑分子印迹聚合物的制备及识别性能研究

以腈菌唑为模板分子，采用原位分子印迹技术，制备具有特定识别性能的连续棒状分子印迹聚合物。考察了流动相中酸量对分离的影响，研究了几种结构类似物在所得分子印迹柱上的保留特性。结果表明，这种棒状分子印迹聚合物比相应的空白聚合物有高的识别性能和选择性。     

聚2,6-二甲基苯醚树脂分子量分布及其与冲击强度关系的研究

本工作建立了室温下用凝胶色谱法(GPC)测定聚2,6-二甲基苯醚(PPO)树脂分子量、分子量分布的方法。淋洗剂不采用文献申报道的毒性较大者,也不在较高柱温下进行,而采用甲苯(或氯仿)在室温下测定。对样品在甲苯中溶解温度、浓度和稳定性等都进行了系统研究,找到了最优化条件。GPC数据结合改性PPO(MPPO)产品性能测定结果,经仔细分析找到了影响MPPO产品质量的一个重要因素是PPO树脂中低分子量部分含量。它与产品冲击强度有明显的依赖关系。提出了一个从CPC谱图确定低分子量部分含量的方法。