Pixel-by-pixel analysis of DCE MRI curve patterns and an illustration of its application to the imaging of the musculoskeletal system

Dynamic contrast enhanced (DCE) MRI is a widespread method that has found broad application in the imaging of the musculoskeletal (MSK) system. A common way of analyzing DCE MRI images is to look at the shape of the time-intensity curve (TIC) in pixels selected after drawing an ROI in a highly enhanced area. Although often applied to a number of MSK affections, shape analysis has so far not led to a unanimous correlation between these TIC patterns and pathology. We hypothesize that this might be a result of the subjective ROI approach. To overcome the shortcomings of the ROI approach (sampling error and interuser variability, among others), we created a method for a fast and simple classification of DCE MRI where time-curve enhancement shapes are classified pixel by pixel according to their shape. The result of the analysis is rendered in multislice, 2D color-coded images. With this approach, we show not only that differences on a short distance range of the TIC patterns are significant and cannot be appreciated with a conventional ROI analysis but also that the information that shape maps and conventional standard DCE MRI parameter maps convey are substantially different.     

Germaborenes: Borylene Transfer Agents for the Synthesis of Iminoboranes

Halide and phenyl substituted germaborenes were shown to react with azides at room temperature and transfer a borylene moiety to give iminoboranes. This iminoborane synthesis based on a borylene transfer route was investigated computationally in the case of the phenyl substituted germaborene.     

Preparation of hybrid microcapsules and application to self‐healing agent

It was tried to prepare hybrid microcapsules composed of porous inorganic particles and epoxy resin shell and to apply to the self‐healing agent. A water soluble imidazole of gelation promoting agent as the core material was microencapsulated in the porous inorganic particles, which were coated with epoxy resin. The porous inorganic particles were prepared with the interfacial reaction between sodium silicate and calcium ion in the (W/O) dispersion. In the experiment, the concentration of sodium silicate and the mixing speed to form the (W/O) dispersion were mainly changed. The porous inorganic particles were immersed in the aqueous solution dissolving imidazole and then, added in the corn oil dissolving epoxy resin to be microencapsulated with gelated epoxy resin. The hybrid microcapsules containing imidazole with the mean diameters from 200 to 400 µm were able to be prepared and to induce the gelation reaction of epoxy resin by breaking the hybrid microcapsule shell due to heating. Copyright © 2013 John Wiley & Sons, Ltd.     

Determination of conditional stability constants for some divalent transition metal ion‐EDTA complexes by electrospray ionization mass spectrometry

Conditional stability constants of coordination complexes comprising divalent transition metals, Cu²⁺, Ni²⁺, Zn²⁺, Co²⁺, and ethylenediaminetetraacetic acid (EDTA) were determined utilizing electrospray ionization mass spectrometry. The deviation of signal response of a reference complex was monitored at addition of a second metal ion. The conditional stability constant for the competing metal was then determined through solution equilibria equations. The method showed to be applicable to a system where Co²⁺ and Zn²⁺ competed for EDTA at pH 5. When Cu²⁺ and Ni²⁺ competed for EDTA, the equilibrium changed over time. This change was shown to be affected in rate and size by the type of organic solvent added. In this work, 30% of either methanol or acetonitrile was used. It was found that if calibration curves are prepared for both metal complexes in solution and the measurements are repeated with sufficient time space, any change in equilibrium of sample solutions will be discovered. Copyright © 2014 John Wiley & Sons, Ltd.     

Alkyl Ammonium Cation Stabilized Biocidal Polyiodides with Adaptable High Density and Low Pressure

The effective application of biocidal species requires building the active moiety into a molecular back bone that can be delivered and decomposed on demand under conditions of low pressure and prolonged high‐temperature detonation. The goal is to destroy storage facilities and their contents while utilizing the biocidal products arising from the released energy to destroy any remaining harmful airborne agents. Decomposition of carefully selected iodine‐rich compounds can produce large amounts of the very active biocides, hydroiodic acid (HI) and iodine (I₂). Polyiodide anions, namely, I₃^?, I₅^?, which are excellent sources of such biocides, can be stabilized through interactions with large, symmetric cations, such as alkyl ammonium salts. We have designed and synthesized suitable compounds of adaptable high density up to 3.33 g cm^?3 that are low‐pressure polyiodides with various alkyl ammonium cations, deliverable iodine contents of which range between 58.0–90.9 %.     

Efficient Biocatalytic Degradation of Pollutants by Enzyme‐Releasing Self‐Propelled Motors

The first example of a self‐propelled tubular motor that releases an enzyme for the efficient biocatalytic degradation of chemical pollutants is demonstrated. How the motors are self‐propelled by the Marangoni effect, involving simultaneous release of SDS surfactant and the enzyme remediation agent (laccase) in the polluted sample, is illustrated. The movement induces fluid convection and leads to the rapid dispersion of laccase into the contaminated solution and to a dramatically accelerated biocatalytic decontamination process. The greatly improved degradation efficiency, compared to quiescent solutions containing excess levels of the free enzyme, is illustrated for the efficient biocatalytic degradation of phenolic and azo‐type pollutants. The high efficiency of the motor‐based decontamination approach makes it extremely attractive for a wide‐range of remediation processes in the environmental, defense and public health fields.     

Qualitative spectroscopic characterization of the matrix–silane coupling agent interface across metal fibre reinforced ion exchange resin composite membranes

The characterization of novel metal reinforced electro-dialysis ion exchange membranes, for water desalination, by attenuated total reflectance Fourier transform infrared spectroscopy mapping is presented in this paper. The surface of the porous stainless steel fibre meshes was treated in order to enhance the amount of surface oxide groups and increase the material hydrophilicity. Then, the metal membranes were functionalized through a sol–gel reaction with silane coupling agents to enhance the affinity with the ion exchange resins and avoid premature metal oxidation due to redox reactions at the metal–polymer interface. Polished cross sections of the composite membranes embedded into an epoxy resin revealed interfaces between metallic frameworks and the silane layer at the interface with the ion exchange material. The morphology of the metal–polymer interface was investigated with scanning electron microscopy and Fourier transform infrared micro-spectroscopy. Fourier transform infrared mapping of the interfaces was performed using the attenuated total reflectance mode on the polished cross-sections at the Australian Synchrotron. The nature of the interface between the metal framework and the ion exchange resin was shown to be homogeneous and the coating thickness was found to be around 1 μm determined by Fourier transform infrared micro-spectroscopy mapping. The impact of the coating on the properties of the membranes and their potential for water desalination by electro-dialysis are also discussed.     

Exploring the Limits of Transition-Metal Fluorination at High Pressures

Fluorination is a proven method for challenging the limits of chemistry, both structurally and electronically. Here we explore computationally how pressures below 300 GPa affect the fluorination of several transition metals. A plethora of new structural phases are predicted along with the possibility for synthesizing four unobserved compounds: TcF₇, CdF₃, OsF₈, and IrF₈. The Ir and Os octaflourides are both predicted to be stable as quasi-molecular phases with an unusual cubic ligand coordination, and both compounds formally correspond to a high oxidation state of +8. Electronic-structure analysis reveals that otherwise unoccupied 6p levels are brought down in energy by the combined effects of pressure and a strong ligand field. The valence expansion of Os and Ir enables ligand-to-metal F 2p→M 6p charge transfer that strengthens M−F bonds and decreases the overall bond polarity. The lower stability of IrF₈, and the instability of PtF₈ and several other compounds below 300 GPa, is explained by the occupation of M−F antibonding orbitals in octafluorides with a metal-valence-electron count exceeding 8.     

Impact of titanate coupling agent on properties of high density polyethylene composite filled with coal gangue

In this study, surface modification of coal gangue (CG) was performed with titanate coupling agent 201 (isopropyl tri(dioctylpyrophosphate) titanate), and the effects of surface modifier on mechanical properties and thermal stability of high-density polyethylene filled with CG (HDPE/CG) and high-density polyethylene filled with modified CG (HDPE/mCG) composites were investigated. The coupling agent was successfully grafted on CG surface through chemical reaction according to the analyses of Fourier transform infrared spectroscopy (FT-IR) and X-ray photoelectron spectroscopy (XPS), and the coupling agent can effectively enhance the hydrophobicity of surface that was verified by water contact angle beyond 90° of modified CG sample. With the introduction of coupling agent, some enhancements of tensile strength, flexural strength, and impact strength were observed in HDPE/mCG compared with HDPE/CG, due to the improved compatibility between mCG fillers and matrix. The increased storage modulus and decreased loss factor of HDPE/mCG composite further confirm the stronger interface adhesion after modification. Moreover, it is found that titanate coupling agent 201 can improve the thermal stability of HDPE/mCG composite to some extent.     

Achieving highly crystalline rate and crystallinity in Poly(l-lactide) via in-situ melting reaction with diisocyanate and benzohydrazine to form nucleating agents

The drawback of the application for poly(_l-lactide) (PLLA) is the low crystalline rate and crystallinity obtaining via normal processing methods. Modifying crystallization of PLLA has been found to be an efficient way to improve its mechanical and heat resistance properties. In this wok, 4, 4′-diphenylmethane diisocyanate (M) and benzohydrazine (P) were employed into PLLA melt to in-situ form nucleating agents. The in-situ melting reaction was confirmed by a nuclear magnetic resonance spectroscopy. The crystallization behavior and crystalline morphology were investigated by a differential scanning calorimetry, a polarized optical microscopy and a field emission scanning electron microscope. The crystalline rate of PLLA was abruptly enhanced by adding (M+P) and melting reaction with PLLA. The crystallization half-time of PLLA dramatically decreased from 42.0 to 1.1 min at 130 °C by the in-situ formation of nucleating agents. The crystallinity of PLLA increased from 10.3 to 42.1 by adding 0.25% (M+P) and melting reaction for 8 min. Furthermore, the size of PLLA crystals was dramatically reduced because of the nucleating effect. Accompanied with improvement on crystallinity, the Vicat softening temperature of PLLA shifted from 57.4 °C to 93.7 °C by the in-situ reaction with 6.00% (M+P), and indicating heat resistance enhancement.