利用光热偏转技术实施光学薄膜弱吸收的多波长测量

介绍了光热表面形变光束偏转技术用于测量光学薄膜弱吸收的基本原理,简述多波长吸收测量装置的建立和测试过程,最后给出简单的测量实例.     

Structure induced by irradiation of femtosecond laser pulse in dyed polymeric materials

We investigated the structures induced by an irradiation of a near‐infrared (NIR) femtosecond laser pulse in dye‐doped polymeric materials {poly(methyl methacrylate) (PMMA), thermoplastic epoxy resin (Epoxy), and a block copolymer of methyl methacrylate and ethyl acrylate‐butyl acrylate [p(MMA/EA‐BA) block copolymer]}. Dyes used were classified into two types—type 1 with absorption at 400 nm and type 2 with no absorption at 400 nm. The 400‐nm wavelength corresponds to the two‐photon absorption region by the irradiated NIR laser pulse at 800 nm. Type 1 dye‐doped PMMA and p(MMA/EA‐BA) block copolymer showed a peculiar dye additive effect for the structures induced by the line irradiation of a NIR femtosecond laser pulse. On the contrary, dye‐doped Epoxy did not exhibit a dye additive effect. The different results among PMMA, p(MMA/EA‐BA) block copolymer, and Epoxy matrix polymers are supposed to be related to the difference of electron‐acceptor properties. The mechanism of this type 1 dye‐additive‐effect phenomenon for PMMA and p(MMA/EA‐BA) block copolymer is discussed on the basis of two‐photon absorption of type 1 dye at 400 nm by the irradiation of a femtosecond laser pulse with 800 nm wavelength and the dissipation of the absorbed energy to the polymer matrix among various transition processes. Dyes with a low‐fluorescence quantum yield favored the formation of thicker grating structures. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2800–2806, 2002     

十四烷基三甲基溴化铵对膨润土改性合成及其表征

用阳离子表面活性剂十四烷基三甲基溴化铵(C17H38NBr)对膨润土进行插层改性制备.配制浓度为2.35%十四烷基三甲基溴化铵溶液备用.在碘量瓶中称取3.04g膨润土,加入30mL超纯水、10mL十四烷基三甲基溴化铵溶液,制成土浆,放入微波炉中反应1min.产物经抽滤、洗涤、烘干、研磨,做FT-IR和DSC-TG分析.DSC曲线在500℃时有一明显的放热峰;TG曲线显示改性土的失重率有明显的增大.有机改性膨润土中确实含有大量有机物,改性成功.     

A method for determining optical constants, dimensions, and concentrations of “soft” absorbing particles in the brightening band region

We investigate the possibilities of creating a method for estimating the optical constants, dimensions, and concentrations of “soft” absorbing particles by applying a theoretical analysis of the angular dependence of the intergrated indicatrix, overall characteristics of light scattering, and absorption on the phase shift and diffraction parameter of particles in the brightening band region. We show that using the investigated optical characteristics, it is possible to determine the unknown parameters of a suspension from experimental data. Institute of Biophysics, Siberian Branch of the Russian Academy of Sciences, Akademgorodok, Krasnoyarsk, 660036, Russia. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 6, pp. 807–812, November–December, 1997.     

H m -modified wave operator for nonlinear Hartree equation in space of dimensionn≥2

We consider the scattering problem for the Hartree equation with potential |x|⁻¹ in a space of dimensionn≥2. We prove the existence ofH ^m -modified wave operator for Hartree equation on a dense set of a neighborhood of zero inH ^m (ℝ ⁿ ), meanwhile, we obtain also the global existence for the Cauchy problem of Hartree equation in a space of dimensionn≥2. This project is supported by the National Natural Science Foundation of China, 19601005     

Absorption spectra and the nature of complexes in the polyvinyl Alcohol-Nickel (II) chloride system

We have used electronic spectroscopy in the 160–1100 nm range to study the polyvinyl alcohol-nickel(II) chloride system. Based on the results obtained, we hypothesize formation of mixed-ligand complexes of the type [Ni(H₂O)_6-nCl_n]^2-n (n = 0, 1,..., 5) in the polyvinyl alcohol matrix. Transformation of the coordination sphere as the NiCl₂ concentration changes is apparent both in the region of the d-d transition bands (350–1100 nm) and in the region of the charge transfer bands (160–250 nm). We propose assigning the absorption bands separated by mathematical treatment to complexes of specific compositions. __________ Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 73, No. 1, pp. 136–138, January–February, 2006.     

Full-Wave Analyses for a Multi-Layered Microstrip Patch Antenna

This paper describes numerical modelling of a dual band multi-layered microstrip patch antenna operating at 35GHz on an in-house semi-insulating GaAs substrate. The simulated and measured resonant frequencies at both lower and upper resonant frequencies will be compared to check the accuracy of the different numerical modelling techniques.     

Fluorinated,crosslinkable terpolymers based on vinylidene fluoride and bearing sulfonic acid side groups for fuel‐cell membranes

The radical terpolymerization of 8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene with vinylidene fluoride (VDF) and perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride is presented. Changing the feed compositions of these three fluorinated comonomers enabled us to obtain different random‐type poly[vinylidene fluoride‐ter‐perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride‐ter‐8‐bromo‐1H,1H,2H‐perfluorooct‐1‐ene] terpolymers containing various sulfonyl fluoride and brominated side groups. Yields higher than 70% were reached in all cases. The hydrolysis of the sulfonyl fluoride group into the ? SO₃Li function in the presence of lithium carbonate was quantitatively achieved without the content of VDF being affected, and so dehydrofluorination of the VDF base unit was avoided. These original terpolymers were then crosslinked via dangling bromine atoms in the presence of a peroxide/triallyl isocyanurate system, which produced films insoluble in organic solvents such as acetone and dimethylformamide (which totally dissolved uncured terpolymers). The acidification of ? SO₃Li into the ? SO₃H function enabled protonic membranes to be obtained. The thermal stabilities of the crosslinked materials were higher than those of the uncured terpolymers, and their electrochemical performances were investigated. According to the contents of the sulfonic acid side functions, the ion‐exchange capacities ranged from 0.6 to 1.5 mequiv of H⁺/g, whereas the water uptake and conductivities ranged from 5–26% (±11%) and from 0.5 to 6.0 mS/cm, respectively. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4566–4578, 2006     

Smaller Output Beam Divergence in the Slowly Opened Q-Switch Operation

The mechanism of the slowly opened Q-switch operation was investigated thoroughly. Maximum energy extraction from the resonator could be optimized, and the smallest output beam divergence could be achieved. In this article, we present a detailed analysis that has numerically verified the mode-selection mechanism in the slowly opened Q-switch operation, and the degree of the smaller output laser beam divergence that has been achieved. The mechanism of the slowly opened Q-switch operation is the inherent advantage of the passive saturable absorber in this operation. We can use the maximum energy extraction and the smallest output beam divergence results of the slowly opened Q-switch operation to design and optimize various passive saturable absorbers: plastic dye sheets, LiF:F₂⁻ color center crystals, Cr4⁺: YAG crystals, RG1000 color glass filters, and the single crystal semiconductor saturable absorber wafers that are in developed in our microchip laser systems.     

Chemically modified proton‐conducting membranes based on sulfonated polyimides: Improved water stability and fuel‐cell performance

A series of branched/crosslinked sulfonated polyimide (B/C‐SPI) membranes were prepared and evaluated as proton‐conducting ionomers based on the new concept of in situ crosslinking from sulfonated polyimide (SPI) oligomers and triamine monomers. Chemical branching and crosslinking in SPI oligomers with 1,3,5‐tris(4‐aminophenoxy)benzene as a crosslinker gave the polymer membranes very good water stability and mechanical properties under an accelerated aging treatment in water at 130 °C, despite their high ion‐exchange capacity (2.2–2.6 mequiv g^?1). The resulting polymer electrolytes displayed high proton conductivities of 0.2–0.3 S cm^?1 at 120 °C in water and reasonably high conductivities of 0.02–0.03 S cm^?1 at 50% relative humidity. In a single H₂/O₂ fuel‐cell system at 90 °C, they exhibited high fuel‐cell performances comparable to those of Nafion 112. The B/C‐SPI membranes also displayed good performances in a direct methanol fuel cell with methanol concentrations as high as 50 wt % that were superior to those of Nafion 112. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3751–3762, 2006