小麦秸秆发酵产生的真菌Pleurotus ostreatus IBL-02锰过氧化物酶的溶胶-凝胶固定化及其催化污水脱色(英文)

Solid state bio-processing of wheat straw was carried out through an indigenous fungal strain Pleurotus ostreatus IBL-02 under pre-optimized fermentation conditions. The maximum activity, 692±12 U/mL, of the industrially important manganese peroxidase (MnP) enzyme was recorded after five days of still culture incubation. The crude MnP was 2.1-fold purified with a specific activity of 860 U/mg after purification on a Sephadex-G-100 gel column. On native and SDS-PAGE electrophoresis gels, the purified MnP fraction was a single homogenous band of 45 kDa. An active fraction of MnP was immobilized using hydrophobic sol-gel entrapment comprising tetramethoxysilane (T) and propyltrimethoxysilane (P) at different T:P molar ratios. Characterization revealed that after 24 h incubation at varying pH and temperatures, the MnP fraction immobilized at a T:P ratio of 1:2 in the sol-gel retained 82% and 75% of its original activity at pH4 and 70 ℃, respectively. The optimally active fraction at a 1:2 T:P ratio was tested against MnSO4 as a substrate to determine the kinetic catalytic constants KM and Vmax . To explore the industrial applicability of P. ostreatus IBL-02 MnP, both the free and immobilized MnP were used for the decolorization of four different textile industrial effluents. A maximum of 100% decolorization was achieved for the different textile effluents within the shortest time period. A lower KM , higher Vmax , hyper-activation, and enhanced acidic and thermal resistance up to 70 ℃ were the novel catalytic features of the sol-gel immobilized MnP, suggesting that it may be a potential candidate for biotechnological applications particularly for textile bioremediation purposes.     

Book reviews

Inorganic mercury ions (Hg²⁺) in laboratory prepared solutions were determined with a screen-printed carbon electrode (SPCE) coated with a polyaniline-methylene blue (PANI-MB) polymer layer. The structure and properties of the PANI-MB polymer layer were compared to that of normal polyaniline (PANI) in order to elucidate the structure of the PANI-MB layer. The electrically-conducting polymers were prepared by electrochemical polymerisation of monomer solutions of aniline, and mixed solutions of aniline with methylene blue onto respective screen-printed carbon electrodes (SPCEs). Scanning Electron Microscopy (SEM) analyses of the SPCE polymer coated electrodes have shown that nanostructured materials have formed with the diameters of the PANI nanoclusters and PANI-MB nanorods at approximately 200 nm. Anodic stripping voltammetry (ASV) was used to evaluate a solution composed of 1 × 10^?6 M Hg²⁺, in the presence of the SPCE/PANI-MB polymer sensor electrode. The Hg²⁺ ions were determined as follows: (i) pre-concentration and reduction on the modified electrode surface and (ii) subsequent stripping from the electrode surface during the positive potential sweep. The experimental conditions optimised for Hg²⁺ determination included the supporting electrolyte concentration and the accumulation time. The results obtained have shown that the SPCE/PANI-MB polymer sensor electrode operates optimally at a pH 2, with the supporting electrolyte concentration at 0.5 M HCl. A linear calibration curve was found to be in the range of 1 × 10^?8 M to 1 × 10^?5 M Hg²⁺ after 120 s of pre-concentration. The detection limit was calculated and found to be 54.27 ± 3.28 µg L^?1 of Hg²⁺. The results have also shown that a conducting polymer modified SPCE sensor electrode can be used as an alternative transducer for the voltammetric stripping and analysis of inorganic Hg²⁺ ions.     

锂离子电池正极材料LiNi0.5Mn1.5O4金属掺杂的第一性原理研究

近来尖晶石相LiNi0.5Mn1.5O4被认为是一种有前景的二次锂离子电池正极材料.但是其相对较差的循环性能和倍率性能限制了LiNi0.5Mn1.5O4的大规模应用.金属掺杂被认为是一种提高其电化学性能的有效方法.然而,还急需深层次地理解掺杂对材料结构和电化学性质的影响.采用第一性原理方法,系统地研究了金属掺杂的LiM0.125Ni0.375Mn1.5O4(M为Cr,Fe和Co)电极体系的结构与电子性质.计算结果显示,少量的过渡金属M取代LiNi0.5Mn1.5O4晶格中的Ni,能够有效抑制材料在电化学脱嵌锂过程中的体积变化(从锂化相到脱锂相,体积变化率约为4%,而未掺杂的情况为4.7%),提高材料循环性能.体系态密度表明金属掺杂能够减小体系的带隙,进而提高材料的电子传导.另外,通过Li离子的扩散计算,我们发现与未掺杂的LiNi0.5Mn1.5O4相比,Co掺杂使得Li在材料中两条不同扩散路径的扩散能垒分别降低了约90 meV和140 meV,表明Co掺杂有利于Li在材料中的快速扩散.     

富锂正极材料Li[Li0.2Mn0.4Fe0.4]O2的表面包覆改性

用共沉淀法合成了富锂正极材料Li[Li0.2Mn0.4Fe0.4]O2,并对其表面进行Al2O3包覆。采用XRD、SEM和电化学测试等方法对样品进行表征。结果表明,与Li[Li0.2Mn0.4Fe0.4]O2相比,包覆改性后的Li[Li0.2Mn0.4Fe0.4]O2具有较好的电化学性能,其初始放电容量未明显降低,而循环寿命大大提高,4.0%Al2O3包覆处理的富锂正极材料经50次充放电循环后,容量衰减量在9%左右。     

Mn(III)-based reaction of alkenes with quinolinones. Formation of peroxyquinolinones and quinoline-related derivatives

The reactions of 1,1-disubstituted alkenes with 4-hydroxyquinolin-2(1H)-ones under both Mn(III)-catalyzed aerobic oxidation conditions at room temperature and Mn(III)-mediated oxidation conditions at reflux temperature are described. The Mn(III)-catalyzed aerobic oxidation afforded bis(hydroperoxyethyl)quinolinones and azatrioxa[4.4.3]propellanes, while the oxidation with Mn(OAc)₃·2H₂O produced furo[3,2-c]quinolin-4-one analogues. The existence of a substituent at the 3-position of the 4-hydroxyquinolin-2(1H)-ones prevented a double reaction with the alkenes, and (endoperoxy)quinolinones and/or (hydroperoxyethyl)quinolinones were obtained under the Mn(III)-catalyzed aerobic conditions, while furo[3,2-c]quinolinone hemiacetals and vinylquinolinones were selectively produced under the Mn(III)-mediated oxidation conditions depending on the reaction temperature and times. Cyclic assembly of quinolinone-related 1,3-dicarbonyl compounds such as dihydropyridinones, pyranones, and dimedone derivatives was also examined under elevated temperature conditions.     

Synthesis of branched carbasugars via photooxygenation and manganese(III) acetate free radical cyclization

Transformation of cyclohexa-1,3- and 1,4-dienes to carbasugars is described. Photooxygenation of dienes gave bicyclic endoperoxides, which were reduced with thiourea to the corresponding 1,4-diols with cis-configuration. Lactonization of the remaining double bond by oxidative addition of acetic acid to the double bond in the presence of Mn(OAc)₃ followed by lactone ring-opening reaction gave the target branched carbasugars.     

基于电喷雾电离质谱的人肝癌细胞HepG2与正常肝细胞L02的N-糖链的定性定量比较

以培养的原发性肝癌细胞HepG2和正常肝细胞L02为研究对象,采用细胞裂解液提取总蛋白,用PNGase F酶解释放N-糖链,以微晶纤维素柱结合石墨碳柱纯化分离N-糖链,通过电喷雾电离质谱(ESI-MS)和串联质谱(MS/MS)对N-糖链进行序列鉴定,以β-环糊精为内标对2种细胞系的N-糖链进行了定量比较分析.结果表明,在肝癌细胞系HepG2和正常细胞系L02中共检测到26种N-糖链,与L02相比,HepG2的大多数高甘露糖型糖链、唾液酸化糖链和岩藻糖基化糖链的数量都明显升高,其中有15种糖链在数量上具有极显著性差异(p0.01),1种糖链具有显著性差异(p0.05).本研究为进一步探索肝癌中各类N-糖链的表达特点及发现早期肝癌糖链标志物提供了参考.     

(Yb3+, Mn2+) Co-doped CdTe nanocrystals with enhanced quantum yields and red-shift emission

We prepared the nanocrystals (NCs) of CdTe, CdTe:Yb, and CdTe:Yb, Mn vis water phase synthesis and examined their structural, morphological, and optical properties. All NCs have a particle diameter of about 2–4 nm, and the monodispersed, uniform spherical, cubic structure of the CdTe NC remains largely unchanged after the doping with Yb and Mn. According to the X-ray diffraction results, the CdTe, CdTe:Yb, and CdTe:Yb, Mn NCs all have a cubic structure, and the diffraction peak of CdTe:Yb NC is at a lower 2θ angle compared with that of the CdTe NC. With the CdTe NC as the reference, the UV–Vis absorption of the CdTe:Yb and the CdTe:Yb, Mn NCs exhibits a blueshift and a redshift, and the emission of CdTe:Yb and CdTe:Yb, Mn has a blueshift of about 12 nm and a redshift of about 73 nm, respectively. The CdTe:Yb, Mn NCs have higher quantum yields than the CdTe:Yb NC, and the quantum yield is the highest when CdTe is doped with 1:1 Mn²⁺/Yb³⁺. In addition, both the CdTe:Yb and CdTe:Yb, Mn NCs have a shorter fluorescence lifetime than the CdTe NC.     

Exploring AuRh Nanoalloys: A Computational Perspective on the Formation and Physical Properties

We studied the formation of AuRh nanoalloys (between 20–150 atoms) in the gas phase by means of Molecular Dynamics (MD) calculations, exploring three possible formation processes: one-by-one growth, coalescence, and nanodroplets annealing. As a general trend, we recover a predominance of Rh@Au core-shell ordering over other chemical configurations. We identify new structural motifs with enhanced thermal stabilities. The physical features of those selected systems were studied at the Density Functional Theory (DFT) level, revealing profound correlations between the nanoalloys morphology and properties. Surprisingly, the arrangement of the inner Rh core seems to play a dominant role on nanoclusters’ physical features like the HOMO-LUMO gap and magnetic moment. Strong charge separations are recovered within the nanoalloys suggesting the existence of charge-transfer transitions.