Graphitic nanofillers in PMMA nanocomposites—An investigation of particle size and dispersion and their influence on nanocomposite properties

Mechanical, thermal, and electrical properties of graphite/PMMA composites have been evaluated as functions of particle size and dispersion of the graphitic nanofiller components via the use of three different graphitic nanofillers: “as received graphite” (ARG), “expanded graphite,” (EG) and “graphite nanoplatelets” (GNPs) EG, a graphitic materials with much lower density than ARG, was prepared from ARG flakes via an acid intercalation and thermal expansion. Subsequent sonication of EG in a liquid yielded GNPs as thin stacks of graphitic platelets with thicknesses of ～10 nm. Solution‐based processing was used to prepare PMMA composites with these three fillers. Dynamic mechanical analysis, thermal analysis, and electrical impedance measurements were carried out on the resulting composites, demonstrating that reduced particle size, high surface area, and increased surface roughness can significantly alter the graphite/polymer interface and enhance the mechanical, thermal, and electrical properties of the polymer matrix. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2097–2112, 2007     

A comparative study on the interaction between tin(II) porphyrin and selected group 8B metals for potential application as reduction catalysts

We study the interaction between tin(II) porphyrin (SnPor) with platinum and non-precious Group 8B metals (iron, cobalt and nickel) by density functional theory and discuss the electronic properties of the resulting products. We also model the interaction of the resulting compounds with water where applicable. Our studies indicate that, SnPor-Ni possesses electronic properties similar to SnPor-Pt, suggesting that it may possess similar photocatalytic properties for reduction reactions, such as converting water to hydrogen gas.     

离化团簇束法制备c轴取向的ZnO薄膜

为了探索低温可调控ZnO薄膜沉积技术,提出了一种新的ZnO薄膜制备方法,即离化团簇束（ICB）法,并自行设计研制了应用该方法制备ZnO薄膜的专门装置.采用超音速喷嘴获得高速锌原子团簇束,用Hall等离子体源产生氧离子束离化锌原子团簇,获得了较高的离化率.在沉积过程中,可以通过调节衬底偏压、氩氧比、衬底加热温度等参数,来控制成膜的质量;应用这个装置成功地在硅衬底上制备的ZnO薄膜,经XRD和EDS检测,薄膜的c轴取向一致,Zn、O原子百分比接近于1：1,成膜质量好.     

Magnetic properties of multiwalled carbon nanotubes as a function of acid treatment

We investigate the electronic properties of multiwalled carbon nanotubes both before and after acid treatment with concentrated sulphuric and nitric acids. Magnetic susceptibility measurements were performed using a SQUID magnetometer and show that there is a considerable enhancement in the density of states at the Fermi level. The data shows that the diamagnetic influence from the graphitic nanotubes dominates. We experimentally observe, after acid treatment, that the diamagnetic susceptibility remains unchanged at 5 K but notably decreases at 77 K. We propose the acid treatment has increased the Van Vleck paramagnetic contribution lowering the diamagnetic response from the π-electron orbital magnetisation. The Van Vleck paramagnetic contribution is finite-temperature dependent with a diminishing contribution at higher fields.     

Analysis of atomic arrangement in magnetic Fe–Pt nanoparticles

The order parameter S of Fe–Pt nanoparticles is estimated from X-ray diffraction (XRD) patterns. The total intensity of a diffraction peak is obtained by Rietveld analysis as well as simply integrating the intensity. The Rietveld analysis is found to provide a plausible value of S even for a sample showing an XRD pattern with broad and overlapped peaks. Another order parameter Q, which is obtained from Mössbauer spectra, is introduced, and it is confirmed that Q is equivalent to the probability of Fe atoms being in the L1₀-type atomic arrangement. The coercivity of Fe–Pt nanoparticles is directly proportional to Q, while it vanishes at S=0.4, indicating that the magnetic property of Fe–Pt nanoparticles has a closer relationship to Q than S.     

Cathodoluminescence study of extended defects in hydrothermal ZnO crystals

Understanding the luminescence of ZnO is very important for some applications. In spite of the many studies carried out, there are still some points concerning the origin of some of the luminescence emissions in ZnO crystals that require additional study; in particular, the role of extended defects remains to be a matter of controversy. We present here a cathodoluminescence analysis of the defects generated by Vickers indentation in hydrothermal HTT crystals. Special emphasis was paid to the luminescence band peaking around 3.3 eV. The origin of this band is a matter of controversy, since it has been related to different causes, extended defects being one of the candidates for this emission. The CL images were acquired around crystal defects. It is observed that the 3.3 eV emission is enhanced around the crystal defects; though it is also observed, but weaker, out of the defect regions, which suggests that there exist two luminescence emissions peaking very close to 3.3 eV. The two emissions, one related to structural defects and the other to the LO phonon replica of the free excitonic band, appear very close each other and their relative intensity should determine the shape of the spectrum.     

p型未掺杂富锌ZnO薄膜的形成和性能研究

以高纯ZnO为靶材,氩气为溅射气体,利用射频磁控溅射技术在石英衬底上生长出纤锌矿结构的富锌ZnO薄膜.薄膜沿(002)择优取向生长,厚约为1.2μm,呈现电绝缘特性.将溅射的ZnO薄膜在10-3Pa,510~1 000 K的温度范围等温退火1 h,室温Hall测量结果表明ZnO薄膜的导电性能经历了由绝缘—n型—p型—n型半导体的变化.XPS测试表明ZnO薄膜的Zn/O离子比随退火温度的升高而降低,但一直是富锌ZnO,说明未掺杂的富锌ZnO也可以形成p型导电.p型未掺杂富锌ZnO薄膜的形成可归因于VZn受主浓度可以克服VO和Zni本征施主的补偿效应.     

磁控溅射ZnO薄膜的成核机制及表面形貌演化动力学研究

利用原子力显微镜分析了ZnO薄膜在具有本征氧化层的Si(100)和Si(111)基片上的表面形貌 随沉积时间的演化. 通过对薄膜生长形貌的动力学标度表征，研究了射频反应磁控溅射条件 下，ZnO薄膜的成核过程及生长动力学行为. 研究发现，ZnO在基片表面的成核过程可分为初 期成核阶段、低速率成核阶段和二次成核阶段. 对于Si(100)基片，三个成核阶段的生长指 数分别为β₁=1.04，β₂=0.25±0.01，β₃=0.74；对 于Si(11 关键词： ZnO薄膜 磁控溅射 生长动力学 成核机制     

Preparation and characterization of ZnO nanorods from NaOH solutions with assisted electrical field

ZnO naorods on ZnO-coated seed substrates were fabricated by solution chemical method from Zn(NO₃)₂/NaOH under assisted electrical field. The working mechanism of electrical field was analyzed and the factors affecting the rod growth such as potential, precursor concentration and growth temperature were elucidated. The structural and optical properties are characterized by SEM, TEM, XRD, HRTEM and UV-vis. The results indicated that the nanorods have wurtzite structure without electrical field and are primarily of zincite structure under electrical field; when the electrical field is 1.1-1.3 V, not only the elevation of ion diffusion and adsorption lower the crystallite/solution interfacial energy and then the crystal nucleation barrier by increasing charge intensity, but also the production of H⁺ through oxidation of OH⁻ increases properly the degree of solution supersaturation near the substrate, and thus lowers the activation energy. Both the two processes do favor to rod growth. With increasing precursor concentration in this system, the average diameter and length of ZnO nanorods increase, leading to decreasing of optical transmittance. The maximum rod growth rate at given concentration of Zn²⁺ occurs at a specific temperature.     

Electrochemical Immunoanalysis for Carcinoembryonic Antigen Based on Multilayer Architectures of Gold Nanoparticles and Polycation Biomimetic Interface on Glassy Carbon Electrode

This paper describes a layer‐by‐layer (LBL) self‐assembly process of chitosan (CTS) and gold nanoparticles (Au) on the pretreated negatively charged glassy carbon (GC) electrode to fabricate electrochemistry immunosensor with a nontoxic biomimetic interface, which provided an environment similar to a native system and allowed more freedom in orientation for immobilization of carcinoembryonic antibody (anti‐CEA) to monitor carcinoembryonic antigen (CEA). UV‐vis spectroscope, atomic force microscopy (AFM), and cyclic voltammetric (CV) measurements were used to follow the multilayer film formation. The performance of the biominetic interface and factors influencing the assay system were investigated in detail. The differential pulse voltammetry (DPV) current response is used for the CEA concentration assay. The dynamic range was from 0.50 to 80.00 ng mL^?1 with a detection limit of 0.27 ng mL^?1 at 3σ. In addition, the experiment results indicate that immobilization described in this proposed method exhibits a good sensitivity, selectivity, and stability.