Structure-direct assembly of hexagonal pencil-like ZnO group whiskers

Hexagonal ZnO group whiskers synthesized from Zn(NH₃)₄²⁺ precursor at 145°C in a structure-directing template solvent (2.5% v/v alcohol) show strong photoluminescence at 409 and 420 nm. FE-SEM and TEM observation reveals that the ZnO group whiskers consist of uniform pencil-like whiskers with the diameter of around 1.5 μm and the length of up to 6 μm.     

N-TiO2/ZnO复合纳米管阵列的掺杂机理及其光催化活性

以ZnO纳米柱阵列为模板, 采用溶胶-凝胶法制备出TiO2/ZnO和N掺杂TiO2/ZnO的复合纳米管阵列. 扫描电镜(SEM)、X射线光电子能谱(XPS)和紫外-可见漫反射吸收光谱(UV-Vis)的结果表明: 两种阵列的纳米管均为六角形结构, 直径约为100 nm, 壁厚约为20 nm; 在N-TiO2/ZnO复合纳米管阵列中, 掺入的N离子主要是以N-Ox、N-C和N-N的形式化学吸附在纳米管表面, 仅有少量的N离子以取代式掺杂的方式占据TiO2晶格O的位置; 表面N物种形成的表面态能级和取代式掺杂导致带隙的窄化, 增强了纳米管阵列的光吸收效率, 促进了光生载流子的分离. 光催化实验结果表明, N离子的掺杂有利于N-TiO2/ZnO复合纳米管阵列光催化活性的提高.     

The evolution of morphology of ordered porous TiO2 films fabricated from sol-gel method assisted ZnO nanorod template

Ordered porous TiO₂ films, including TiO₂ nanotube arrays, are fabricated by a sol-gel dip-coating approach via ZnO nanorod templates obtained from aqueous solution approach. The results indicate that the morphologies of ordered porous TiO₂ films have been great affected by the sol-gel dip-coating cycle number. Open-ended TiO₂ nanotube arrays can be obtained in optimum dip-coating cycle numbers. The TiO₂ nanotubes with the inner diameter matching well with the diameters of ZnO nanorods, are well assembled and separate each other. When the cycle number is less than this optimum value, no intact porous TiO₂ film can be obtained. As the cycle number is larger than this optimum value, an ordered porous TiO₂ film with many throughout holes is formed. The evolutive mechanism of ordered porous TiO₂ films is proposed.     

Synthesis, structure and physical properties of Ru ferrites: BaMRu5O11 (M=Li and Cu) and BaM′2Ru4O11 (M′=Mn, Fe and Co)

The synthesis, structure, and physical properties of five R-type Ru ferrites with chemical formula BaMRu₅O₁₁ (M=Li and Cu) and BaM′₂Ru₄O₁₁ (M′=Mn, Fe and Co) are reported. All the ferrites crystallize in space group P6₃/mmc and consist of layers of edge sharing octahedra interconnected by pairs of face sharing octahedra and isolated trigonal bipyramids. For M=Li and Cu, the ferrites are paramagnetic metals with the M atoms found on the trigonal bipyramid sites exclusively. For M′=Mn, Fe and Co, the ferrites are soft ferromagnetic metals. For M′=Mn, the Mn atoms are mixed randomly with Ru atoms on different sites. The magnetic structure for BaMn₂Ru₄O₁₁ is reported.     

氧化锰团簇粒子在有序多孔氧化锆孔道中的组装及其特殊性能研究

利用醇溶液浸渍法及后续的热处理工艺成功实现了氧化锰团簇粒子在有序多孔氧化锆孔道中的组装，借助XRD，TEM，UV-vis，EPR以及O~2-TPD等分析手段进行样品结构表征及性能分析。研究表明，氧化锰团簇粒子能比较均匀地分散于规则的孔道中；团簇粒子的生长随着热处理温度的提高受到孔道大小的限制；孔道中的氧化锰团簇粒子能显示出与较大尺寸氧化锰粒子完全不同的强顺磁信号，并且还具有优异的表面氧吸附特性。     

纳米Eu0.10Y1.90-xNdxO3-δ的光致发光特性及浓度猝灭研究

使用超声波作用下的均匀沉淀法,制备了Eu0.10Y1.90-xNdxO3-δ纳米晶荧光粉,用X射线粉末衍射、荧光光谱等对其进行表征.研究了掺杂Nd3 离子对Y2O3∶Eu3 晶格常数、晶粒尺寸及室温光致发光特性的影响.由不同掺杂浓度x=0~0.18下样品的发射光谱强度变化曲线得到猝灭浓度值,探讨了掺杂Nd3 的样品荧光浓度猝灭的机理.发光强度与浓度的关系表明,掺杂离子之间存在的Eu3 -Nd3 或Nd3 -Nd3 间交换相互作用,是导致掺杂样品浓度猝灭的主要原因.     

MoO3、NiO、ZnO在小表面金红石上的分散行为

Dispersion of MoO3, NiO, ZnO on rutile TiO2 with low specific surface area was studied with Mercury Porosimeter, SEM, XPS and Ammonia Extraction method. The dispersion thresholds of MoO3, NiO, ZnO on three rutile TiO2 carriers were obtained with XPS, and com-pared with those on anatase TiO2 with high specific surf are area. Ammonia Extraction method was used to identify the surface oxide species interarting with support surface in different strength and it was found that the proportions of oxides that can not be extracted by ammonia extraction are different for MoO3, NiO and ZnO which are supported on rutile TiO2.     

Thermal behavior of short-range-order in quenched Cu-12 at% Mn assessed by DSC

Summary The ordering behavior of quenched Cu-12 at% Mn was investigated by differential scanning calorimetry (DSC) under increasing temperature conditions. The ordering process can be better explained in terms of a homogeneous short-range-order (SRO) rather than a disperse-short-range-order (DSRO) model as for concentrated Cu-γMn solid solutions. At the employed high quench rates ordering is established in one stage here termed stage 1, assisted by excess vacancies. This stage obeys a first order kinetics law, being the effective activation energy consistent with a weighed average sum of the activation energy for migration of free and bound vacancies. An estimated solute-vacancy binding energy of 15 kJ mol^-1 seems quite reasonable for this alloy together with the assessed activation energy for complex migration of 92.6 kJ mol^-1. By adopting a first SRO order parameter based in quasi-chemical theory in pair approximation and using boundary values calculated from displayed features of DSC traces, the retained degree of quenched-in order at room temperature was calculated. This procedure also enabled to estimate an ordering energy of -2.7 kJ mol^-1. The effect of quenching temperature demonstrate that for smaller vacancy sink densities, the retained degree of order at room temperature goes through a minimum.     

Growth of ramification-like ZnO rods in the presence of polyaniline

To obtain new materials with synergetic or complementary behaviors, polyaniline composite filled with ZnO rods in ramification-like structure was prepared by a hydrothermal approach. Comparative experiments of ZnO preparation in the presence of some metal ions were also carried out. The results indicated that the morphology of ZnO was strongly affected by the preparation condition. The method to grow ZnO rods in the presence of polyaniline offers a simple approach to obtain polyaniline composite filled with linear ZnO structure. The results of X-ray photoelectron spectroscopy show that the strong interaction between ZnO and polyaniline possibly exists to cause the charge transfer.     

溶胶—凝胶合成（Mg,Ca）O—SiO2：Eu^3＋,Bi^3＋发光体及其发光行为

以Ｍｇ（ＮＯ３）２，Ｃａ（ＮＯ３）２，Ｅｕ（ＮＯ３）３，Ｂｉ（ＮＯ３）３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度，首次合成０．７０１ｍｏｌＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏｌＳｉＯ２：０．０６ｍｏｌＥｕ＾３＋，０．００２ｍｏｌＢｉ＾３＋（加入Ｌｉ＾＋作为电荷补偿剂）发光体，得到了最佳合成条件，研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程，探讨了发光体在不同激光