Characterization of the Nanoscale Microstructure of an Immersion Silver on Sputtered Copper

1 INTRODUCTION Silver and its compounds have received much attention due to their current and potential applica- tions in many areas[1, 2]. As a metal with the highest electrical and thermal conductivities, silver was one of the most important noble metals used in electrical industries in the last century. Several decades ago, however, the development of silver application in electronic area seemed not so quick. The fear for some undesirable phenomena involving silver, like “electrochemi…     

手性奎宁-卟啉锰催化剂的合成及其催化性能

为了寻找催化活性、相转移活性和手性诱导为一体的卟啉配体[1-4],我们把卟啉和手性相转移源连结起来,用奎宁-卟啉化合物作配体[5],考察其锰 配合物为催化剂对烯烃环氧化反应的催化性能。奎宁-卟啉锰 配合物结构式如下:1　实验部分1.1　试剂和仪器苯乙烯和α-甲基苯乙烯在氮气保护下减压蒸馏处理。氧源ＮａＯＣｌ的浓度由碘量法测定。其余试剂均为化学纯,色谱标样环氧苯乙烯和α-甲基环氧苯乙烯按文献[6]方法合成。奎宁-卟啉配体按文献[5]合成。260-50型红外光谱仪,ＫＢｒ压片;ＵＶ-3000型紫外可见光谱仪,溶剂ＤＭＦ;ＭＴ-3型ＣＨＮ元素…     

利用浮区法在高氧压下生长ZnO晶须

采用浮区法在高温高氧压下生长出大尺寸的ZnO晶须. X射线衍射和拉曼光谱分析结果表明, 生长的ZnO晶须结晶良好, 具有六方结构, 沿(001)方向有明显的择优生长取向. 光致发光光谱测量结果表明, 晶须在室温下有较高的紫外光致发光效率和较低的缺陷, 生长时选择大于0.3 MPa的氧压对提高IUV/Igreen有益.     

Mo对Ni/ZnO催化乙醇水蒸气重整制氢性能的影响

考察了Mo及温度对Ni/ZnO催化乙醇水蒸气重整制氢的活性、选择性和抗积炭性能的影响。结果表明，773K适量添加Mo能提高Ni/ZnO催化剂的活性和氢气选择性；Ni/ZnO及Ni-Mo/ZnO催化剂的活性随着温度的升高而提高，823K乙醇完全转化；873K时，Mo质量分数为0.83%的Ni-Mo/ZnO催化剂对氢气的选择性最高；添加Mo可以提高Ni/ZnO催化剂的抗积炭能力，从而提高该催化剂的稳定性。程序升温还原（TPR）和X射线衍射（XRD）结果表明，添加Mo有利于Ni氧化物在载体上的分散；减弱氧化态镍物种与载体之间的作用，从而提高了催化剂的活性、选择性和稳定性。     

LaPO4纳米微粒的制备及表征

Surface-modified LaPO4 nanoparticales were synthesized in the mixture solvent of water-ethanol with the surface modification age of dialkylphosphate. The conditions of synthesis and characterization were discussed. The results indicated that nanoparticle core of LaPO4 and surface-modified layer were formed. The surface-modified nanoparticles of LaPO4 can be dispersed in organic solvent and has better lubricating properties.     

示差脉冲伏安法测定乳酸脱氢酶活性及纳米微粒生物毒性检测新方法研究

采用示差脉冲伏安法，在乳酸脱氢酶(LDH)酶促体系“丙酮酸盐 + NADH +H⁺ (?) 乳酸盐 + NAD⁺”中，通过检测NAD⁺还原峰电流的变化，测定了不同条件下(不同酶用量、缓冲液pH值以及温度)LDH的活性、酶促体系的米氏常数K_m^NADH以及最大反应速率v_max。并且在最佳实验条件下，通过检测LDH活性的改变，实验考察了3种纳米物质(ZnS，TiO₂(R)和TiO₂(A))对乳酸脱氢酶酶促体系的影响。     

DNA-mediated coordinative assembly of upconversion hetero-nanostructures for targeted dual-modality imaging of cancer cells

We reported a simple and universal strategy for DNA-mediated assembly of CdTe quantum dots (QDs) and lanthanide-doped upconversion nanoparticles (UCNPs). Such DNA-QD/UCNPs heterostructures not only maintains both fluorescent properties of QDs and upconversion luminescence behaviors of UCNPs, but also offers a polyvalent DNA surface, allowing for targeted dual-modality imaging of cancer cells using an aptamer     

Amperometric Glucose Biosensor Based on Platinum Nanoparticles Combined Aligned Carbon Nanotubes Electrode

A sensitive amperometric glucose biosensor based on platinum nanoparticles (PtNPs) combined aligned carbon nanotubes (ACNTs) electrode was investigated. PtNPs which can enhance the electrocatalytic activity of the electrode for electrooxidating hydrogen peroxide by enzymatic reaction were electrocrystallized on 4‐aminobenzene monolayer‐grafted ACNTs electrode by potential‐step method. These PtNPs combined ACNTs' (PtNPs/ACNTs) surfaces were characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The highly dispersed PtNPs on ACNTs can be obtained. The enzyme electrode exhibits excellent response performance to glucose with linear range from 1×10^?5–7×10^?3 mol L^?1 and fast response time within 5 s. Furthermore, this glucose biosensor also has good reproducibility. It is demonstrated that the PtNPs/ACNTs electrode with high electrocatalytic activity is a suitable basic electrode for preparing enzyme electrodes.     

Selenium Nanoparticles Prepared from Reverse Microemulsion Process

Selenium nanoparticles were prepared by a reverse microemulsion system. Sodium selenosulfate was used as selenium source. The results showed that hydrochloric acid concentration and reaction temperature had great influence on the morphology of products. The crystalline selenium nanowires and amorphous selenium nanorods were obtained in given condition.     

The use of imidazolium ionic liquids for the formation and stabilization of ir0 and rh0 nanoparticles: efficient catalysts for the hydrogenation of arenes

Stable transition-metal nanoparticles of the type [M(0)](n) are easily accessible through the reduction of Ir(I) or Rh(III) compounds dissolved in "dry" 1-n-butyl-3-methylimidazolium hexafluorophosphate ionic liquid by molecular hydrogen. The formation of these [M(0)](n) nanoparticles is straightforward; they are prepared in dry ionic liquid whereas the presence of the water causes the partial decomposition of ionic liquid with the formation of phosphates, HF and transition-metal fluorides. Transmission electron microscopy (TEM) observations and X-ray diffraction analysis (XRD) show the formation of [Ir(0)](n) and [Rh(0)](n) nanoparticles with 2.0-2.5 nm in diameter. The isolated [M(0)](n) nanoparticles can be redispersed in the ionic liquid, in acetone or used in solventless conditions for the liquid-liquid biphasic, homogeneous or heterogeneous hydrogenation of arenes under mild reaction conditions (75 degrees C and 4 atm). The recovered iridium nanoparticles can be reused several times without any significant loss in catalytic activity. Unprecedented total turnover numbers (TTO) of 3509 in 32 h, for arene hydrogenation by nanoparticles catalysts, have been achieved in the reduction of benzene by the [Ir(0)](n) in solventless conditions. Contrarily, the recovered Rh(0) nanoparticles show significant agglomeration into large particles with a loss of catalytic activity. The hydrogenation of arenes containing functional groups, such as anisole, by the [Ir(0)](n) nanoparticles occurs with concomitant hydrogenolysis of the C-O bond, suggesting that these nanoparticles behave as "heterogeneous catalysts" rather than "homogeneous catalysts".