微孔型固体偏氟乙烯-六氟丙烯共聚物电解质

将固体聚合物电解质 (Ｓｏｌｉｄｐｏｌｙｍｅｒｅｌｅｃｔｒｏｌｙｔｅ)用于锂离子电池的研究已经有 3 0年的历史[1] ,从物理角度来看 ,研究过干态型 (ＤｒｙＳＰＥ)、凝胶型 (ＧｅｌｌｅｄＳＰＥ)和微孔型固体聚合物电解质 (ＰｏｒｏｕｓＳＰＥ)三大类型[2 ] ;从化学角度来看 ,研究过含氧、含氮、和含氟的等聚合物[1～ 6 ] .微孔型固体含氟聚合物电解质是近 1 0年来才开始研究并受到产业界很大关注的一种ＳＰＥ .固体聚合物电解质的应用可以解决液体电解质锂离子电池的漏液问题 ,并提高其安全性 ,还可以通过使用塑料包装来减小电池的重量…     

SPE – Microwave‐assisted extraction coupled system for the extraction of pesticides from water samples

SPE is a commonly applied technique for preconcentration of pesticides from water samples. Microwave‐assisted extraction (MAE) technique is the extraction applied for preconcentration of different compounds from solid samples. SPE coupled with MAE is capable of preconcentrating these compounds from water samples too. This investigation was aimed at improving the efficiency of atrazine, alachlor, and α‐cypermethrin pesticide extraction from the spiked water samples applying SPE followed by MAE. In this way, MAE served for elution of pesticides from C₁₈‐extraction disks with solvent heated by microwave energy. Various elution conditions were tested for their effects on the extraction efficiency of the SPE–MAE combined technique. Several parameters, such as elution solvent volume (mL), elution temperature (°C), and duration of elution (min), affect the extraction efficiency of the SPE–MAE coupled system and need to be optimized for the selected pesticides. In order to develop a mathematical model, 15 experiments were performed in the central composite design. The equation was then used to predict recoveries of the pesticides under specific experimental conditions. Optimization of microwave extraction was accomplished using the genetic algorithm approach. Best results were achieved using 20 mL of ethanol at 60°C. Optimal hold time was 5 min and 24 s. The SPE–MAE combination was also compared with the conventional SPE extraction technique with elution of a nonpolar or a moderately polar compound with nonpolar solvents.     

Preparation and Properties of Nickel and Iron Oxides obtained by Calcination of Layered Double Hydroxides

A constant pH precipitation method has been applied to obtain solids with Ni/Fe molar ratios of 2/1, 3/2, 1/1, 2/3, and 1/2. In all cases, a phase with the hydrotalcite‐like structure is obtained, containing Ni^II and Fe^III in the brucite‐like layers and carbonate in the interlayer, and, for samples with a Ni/Fe molar ratio lower than 2/1, amorphous hydrated iron oxides, undetected by X‐ray diffraction, are also formed. The solids have been characterized by element chemical analysis, powder X‐ray diffraction, differential thermal analysis, thermogravimetric and differential thermogravimetric analysis, FT‐IR spectroscopy, temperature‐programmed reduction and assessment of specific surface area by nitrogen adsorption at ?196 °C. In all cases reduction leads to zero‐valent state for the metals, reduced nickel particles probably favouring reduction of Fe^III species; the specific surface area increases with the iron content, probably due to the amorphous nature of the hydrated iron oxides formed. Calcination at 1200 °C in air leads to well crystallized solids, formed by NiFe₂O₄ spinel and, additionally, rocksalt‐type NiO for Ni/Fe ratios larger than 1/2. In this way, solids with tailored compositions of these two phases can be prepared.     

Detection of antisperm antibody in human serum using a piezoelectric immunosensor based on mixed self-assembled monolayers

A novel piezoelectric immunosensor based on mixed self-assembled monolayers (mixed SAMs) formed by short-chain amine- and carboxyl-terminated thiols has been developed to immobilize antigens onto gold electrodes for detecting antisperm antibody (AsAb) in human serum samples. The properties and the enhanced performance of the affinity biosensor interface based on mixed SAMs are investigated. Most importantly, analytical results of several human serum samples using the developed technique are in satisfactory agreement with those given by the enzyme-linked immunosorbent assay (ELISA) method in the concentration ranging from 32.3 to 300.0 mU/ml. It means the procedure proposed in this paper is likely to have a great potential in research and may play an important clinical role in a few years later.     

Determination of carbendazim,thiabendazole, and<Emphasis Type="Italic"> o-</Emphasis>phenylphenol residues in lemons by HPLC following sample clean-up by ion-pairing

An efficient analytical method is presented involving effective sample clean-up with solid-phase extraction and HPLC-UV analysis for the simultaneous determination of carbendazim, thiabendazole, and o-phenylphenol residues in lemons. Sample preparation involves extraction with acetonitrile acidified with trifluoroacetic acid and an ethyl acetate/petroleum ether mixture. Purification of the crude extract was carried out with liquid–liquid partitioning after addition of an aqueous ammonia solution. Final clean-up was performed on polymeric reversed-phase cartridges pretreated with sodium dodecyl sulfate. Chromatographic analysis was performed on a reversed-phase HPLC column isocratically eluted with an acetonitrile/water/ammonia mixture and UV detection at 254 nm. The chromatographic method is repeatable, reproducible, and sensitive. Fungicide recoveries from lemon samples fortified at levels of 5 and 1 mg kg^–1 were 81–85% for carbendazim, 96–98% for thiabendazole, and 81–106% for o-phenylphenol with coefficients of variation of 2.5–7.4%. Detection limits for carbendazim, thiabendazole, and o-phenylphenol in lemons were 0.21, 0.27, and 0.51 mg kg^–1, respectively.     

C12-2-En-C12•2Br与SDS混合水溶液的胶团化研究

与[C12H25N＋(CH3)2CH2]2•2Br－(简记为C12-2-C12•2Br)/ C12H25SO4Na(SDS)混合水溶液相比,随着联接链上乙氧基团(E)数目增加,[C12H25N＋(CH3)2]2C2H4(OC2H4)n•2Br－(简记为C12-2-En-C12•2Br, n=2,3)与SDS混合水溶液澄清区域明显增大. C12-2-E3-C12•2Br/SDS混合胶团化过程中二组分产生了协同效应,理论预测在澄清区域所能达到的最小临界胶团总浓度(cmcT,min)= 0.0339 mmol•L－1,对应的SDS在溶液体相中的摩尔分数(x2*)=0.447.当水溶液体相中SDS摩尔分数(x2)=0.5时,混合胶团总聚集数(NT)=36,混合胶团中SDS的摩尔分数(x2M)=0.43.     

Separation and selectivity in micellar electrokinetic chromatography using sodium dodecyl sulfate micelles or Tween 20-modified mixed micelles

The separation and selectivity of eight aromatic compounds ranging from hydrophilic to hydrophobic properties in micellar electrokinetic chromatography (MEKC) using sodium dodecyl sulfate (SDS) micelles or Tween 20-modified mixed micelles were investigated. The effect of different operation conditions such as SDS and Tween 20 modifier surfactant concentration, buffer pH, and applied voltage was studied. The resolution and selectivity of analytes could be markedly affected by changing the SDS micelle concentration or Tween 20 content in the mixed micelles. Applied voltage and pH of running buffers were used mainly to shorten the separation time. Complete separation of eight analytes could be achieved with an appropriate choice of the concentration of SDS micelles or Tween 20-modified mixed micelles. Quicker elution and better precision could be obtained with SDS-Tween 20 mixed micelles than with SDS micelles. The mechanisms that migration order of those analytes was mainly based on their structures and solute-micelle interactions, including hydrophobic, electrostatic, and hydrogen bonding interactions, were discussed.     

离子液体[BMim]BF4对SDS水溶液表面活性和聚集能力的促进

采用表面张力测定法和核磁共振谱等方法研究了阴离子表面活性剂十二烷基硫酸钠(SDS)在水溶性室温离子液体[BMim]BF4/水混合溶剂中的表面性质及聚集行为, 发现极少量[BMim]BF4的介入就可以显著降低SDS的临界胶束浓度, 提高体系的表面活性; 且[BMim]BF4在混合溶剂中所占的摩尔分数(x1)在一定范围内(0相似文献   

Synthesis and Crystal Structure of Bis(tetraethylammonium) Octabromo‐triselenate(II)‐{dibromodiselenate(I)}, [NEt4]2[Se3Br8(Se2Br2)], the Salt of a Mixed‐valence Bromoselenate(II,I) Anion

The brown crystals of [NEt₄]₂[Se₃Br₈(Se₂Br₂)] ( 1 ) were obtained when selenium and bromine reacted in the solution of acetonitrile in the presence of tetraethylammonium bromide. The crystal structure of 1 has been determined by the X‐ray methods and refined to R = 0.0308 for 10433 reflections. The crystals are monoclinic, space group P2₁ with Z = 2 and a = 12.0393(3) Å, b = 11.8746(3) Å, c = 13.1946(3) Å, β = 96.561(1)° (123 K). In the solid state structure the anion of 1 is built up of Se₃Br₈ unit which consists of a triangular arrangement of three planar SeBr₄ units sharing a common edge through two μ₃‐bridging Br atoms, and one Se₂Br₂ molecule which is linked to one of μ₃‐bridging Br atoms. The three Se^II atoms form a triangle which is almost perpendicular to the planes given by three SeBr₄ moieties. The contact between the μ₃Br and the Se^I atom of the Se₂Br₂ molecule is 3.1711(8) Å and can be interpreted as a bond of the donor‐acceptor type with the μ₃Br as donor and the Se₂Br₂ molecule as acceptor. The terminal Se^II‐Br and μ₃Br‐Se^II bond lengths are in the ranges 2.3537(7)–2.4737(7) Å and 2.7628(7)–3.1701(7) Å, respectively. The bond lengths in coordinated Se₂Br₂ molecule are: Se^I‐Se^I = 2.2636(9) Å, Se^I‐Br = 2.3387(11) and 2.3936(8) Å.     

Application of a chemical equilibrium model to thermodynamic functions of transfer of alcohols from water to aqueous surfactants

In ternary aqueous solutions, hydrophobic solutes such as alcohols tend to aggregate with surfactants to form mixed micelles. These systems can be studied by meas of the functions of transfer of hydrophobic solutes from water to aqueous solutions of surfactant. These thermodynamic functions often go through extrema in the critical micellar concentration (CMC) region of the surfactant. A simple model based on interactions between surfactant and hydrophobic solute monomers, on the distribution of the hydrophobic solute between water and the micelles and on the shift in the CMC induced by the hydrophobic solute, can simulate the magnitude and trends of the transfer functions using parameters which are mostly derived from the binary systems. In order to check the model more quantitatively, volumes and heat capacities of transfer of alcohols from water to aqueous solutions of a nonionic surfactant, octyldimethylamine oxide, were measured. A quantitative agreement was achieved with three adjustable parameters. Good fits are also obtained for the transfers to the ionic surfactants, octylamine hydrobromide and sodium dodecylsulfate. When the equilibrium displacement contribution is small, the distribution constants and the partial molar properties of the alcohols in the micellar phase agree well with the parameters obtained with similar models.