Cellulose hydrolysis using zinc chloride as a solvent and catalyst

Cellulose gel with < 10% of crystallinity was prepared by treatment of microcrystalline cellulose, Avicel, with zinc chloride solution at a ratio of zinc chloride to cellulose from 1.5 to 18 (w/w). The presence of zinc ions in the cellulose gels enhanced the rate of hydrolysis and glucose yield. The evidence obtained from X-ray diffraction, iodine absorption experiments; and Nuclear Magnetic Resonance spectra analysis suggested the presence of zinc-cellulose complex after Avicel was treated with zinc chloride. Zinc-cellulose complex was more susceptible to hydrolysis than amorphous cellulose. Under the experimental condition, cellulose gels with zinc ions were hyrolyzed to glucose with 95% theoretical yield and a concentration of 14% (w/v) by cellulases within 20 h. The same gel was hydrolyzed by acid to glucose with 91.5% yield and a concentration of 13.4% (w/v).     

π -Type and σ -type cation- π complexes of atomic cations

MP2/6-31+G* calculations were performed on the cation- complexes of ethylene, cyclobutadiene and benzene with a number of atomic cations. It was found that except B⁺ all the atomic cations form -type cation- complexes with ethylene. On the other hand, with cyclobutadiene Li⁺, N⁺, Na⁺, P⁺ and K⁺ form -type complexes, whereas H⁺, F⁺, and Cl⁺ form covalent -type complexes. With benzene Li⁺, B⁺, Na⁺, Al⁺, and K⁺ form -type complexes whereas H⁺, F⁺, and Cl⁺ form -type complexes. It was concluded that the driving force to form the -type complex is chemical bonding, and that for metal cations to form -type complexes is non-covalent interaction.     

Reaction of cyclopentadienyllutetium anthracenide with azobenzene. Synthesis and molecular and crystal structure of the binuclear complex [C5H5(THF)Lu(μ−η2:η2−PhN—NPh)]2(THF)2 and its dynamic behavior in solution

The reaction of the cyclopentadienyllutetium anthracenide, C₅H₅Lu(C₁₄H₁₀)²⁻(THF)₂ (1), with azobenzene yielded the [C₅H₅(THF)Lu(μ−η²:η²−PhN—NPh)]₂(THF)₂ (2) binuclear complex. The structure of the reaction product was established by X-ray structural analysis. The dynamic behavior of complex2 in a THF-d₈ solution was studied by¹H NMR spectroscopy in the temperature range of 265–330 K. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1667–1671, September, 1997.     

Reaction of Tetracopper(I)-Phosphonitocavitand with PhSeSiMe3: Synthesis and Structure of a Polyanionic Cluster [pyH]6[(CuCl)9(μ3-SePh)5(μ4-SePh)]

Treatment of tetracopper(I)-phosphonitocavitand [1·Cu₄(μ-Cl)₄(μ₄-Cl)] (2) (1 = tetraphosphonitocavitand [rccc-2,8,14,20-tetrakis-(iso-butyl)-phosphonitocavitand (C₄₄H₄₈O₈P₄Ph₄)]) with PhSeSiMe₃ in THF at low temperature afforded a novel polyanionic cluster [pyH]₆[(CuCl)₉(μ₃-SePh)₅(μ₄-SePh)] (4) as a major product along with a new tetracopper(I)-phosphonitocavitand (3) with a centered μ₃-Cl. Molecular structure of anionic cluster in 4 consists of six PhSe⁻ bridging ligands containing five μ₃-SePh and one exceptional μ₄-SePh bridging nine copper atoms, of which eight copper atoms have trigonal coordination geometry and the other has distorted tetrahedral geometry. Dedicated to Professor Han-Qin Liu on the occasion of his 70th birthday.     

Similarities and differences in the electron ionization-induced fragmentation of structurally related N-alkoxymethyl lactams and sultams

Unimolecular fragmentation patterns of the molecular ions of selected lactams and sultams bearing alkoxymethyl group at the nitrogen atom were studied. The main common fragmentation reaction observed for all compounds studied in this work is the elimination of an aldehyde molecule. This reaction is considered to proceed via two different mechanisms. For lactams, hydrogen rearrangement within an alkoxymethyl group is observed, which leads to the appropriate N-methyl derivatives. For sultams, transfer of the methyl group to the nitrogen and oxygen atoms, proceeding through an ion-neutral complex, dominates. Another important fragmentation channel characteristic exclusively for lactams is the loss of an alkyl radical. This process takes place within the N-alkoxymethyl moiety, yielding the appropriate protonated ion of N-formyllactams. This process is accompanied by relatively high kinetic energy release.     

Synthesis, Crystal Structure Determination, and Physicochemical Study of the Nickel(II) Complex of 4-(Pyridyl-2)-1,2,4-triazole

A new trinuclear nickel(II) complex with 4-(pyridyl-2)-1,2,4-triazole (pytrz), [Ni₃(pytrz)₆(H₂O)₆](NO₃)₆, has been synthesized, and its crystal structure has been determined. The compound was studied by X-ray phase analysis (XRPA), magnetochemical measurements, and electronic and IR spectroscopy.     

A stable carbonyl-pyrazine-metal(0) complex: Synthesis and characterization of cis-tetracarbonylpyrazinetrimethylphosphitetungsten(0)

Pentacarbonylpyrazinetungsten(0), (CO)₅W(pyz), is not stable in solution in polar solvents such as acetone or dichloromethane and undergoes conversion to a bimetallic complex, (CO)₅W(pyz)W(CO)₅ plus free pyrazine. These three species exist at equilibrium. Using the quantitative ¹H NMR spectroscopy, the equilibrium constant could be determined to be K_eq = (5.9 ± 0.8) × 10⁻² at 25 °C. Introducing a second pyrazine ligand into the molecule does not stabilize the complex, as cis-W(CO)₄(pyz)₂ was found to be less stable than W(CO)₅(pyz) and, therefore, could not be isolated. However, introducing trimethylphosphite as a donor ligand into the complex leads to the stabilization of the carbonyl-pyrazine-metal(0) complexes, as shown by the synthesis of cis-W(CO)₄[P(OCH₃)₃](pyz). This complex could be isolated from the reaction of the photogenerated W(CO)₄[P(OCH₃)₃](tetrahydrofuran) with trimethylphosphite upon mixing for 2 h at 10 °C in tetrahydrofuran and characterized by elemental analysis, IR, MS, ¹H, ¹³C, and ³¹P NMR spectroscopy.     

Synthesis and transformations of metallacycles 33. The first example of cycloalumination of cyclonona-1,2-diene with Et<Subscript>3</Subscript>Al and EtAlCl<Subscript>2</Subscript> in the presence of Cp<Subscript>2</Subscript>ZrCl<Subscript>2</Subscript>

Catalytic cycloalumination of cyclonona-1,2-diene upon treatment with Et₃Al and EtAlCl₂ in the presence of Cp₂ZrCl₂, leading to 10-ethyl-10-aluminabicyclo[7.3.0^1,9]dodec-8-ene (1) and 11-ethyl-11-aluminatricyclo[10.7.0^1,12.0^2,10]nonadeca-9,12-diene, respectively, was accomplished in high yields. A possibility for the selective transformation of compound 1 to 1-allyl-9-(pent-4-enyl)cyclonon-1-ene and 10-hydroxybicyclo[7.3.0^1,9]dodec-8-ene in one preparative step was demonstrated. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2156–2159, November, 2007.     

Characterization of cyclodextrin-modified infrared chemical sensors: Part I. Modeling the mechanisms of interaction

To explore the properties of cyclodextrins (CDs) as an optical sensing phase, the behavior of immobilized CD in interaction with analytes was studied in this work. CDs having different cavity sizes were immobilized onto the surface of infrared (IR) internal reflection-sensing element (IRE) to kinetically monitor the behavior of CD in interaction with analytes. Several aromatic compounds having various molecular sizes and functional groups were used to characterize the interaction mechanism. A two-layer modification method was proposed in this work, which utilized a thin hydrophobic film (polyvinyl benzyl chloride) to stick on the IRE and to covalently bond to the CDs through an ethylene diamine linker. The synthesized CD phases exhibited high stability in aqueous solution. To analyze the behavior during the formation of complexes between the guest molecules and the CD phases, we modeled the interaction behavior and treated the kinetic data with the theoretical equations developed in this work. The results indicate that the behavior of the interaction between guest molecules and CDs was explained by considering the formation of two types of complexes: adsorbed complexes and inclusion complexes. The formation of the inclusion complexes was relatively fast, the time required to reach equilibrium could be shorter than a few minutes. The adsorbed complexes were also observed, but their rate of formation was relatively slow; equilibrium could be reached at times greater than 60 min. Based on the signals observed under equilibrium conditions, the concentration of inclusion complexes was approximately three times than that of the adsorbed complexes.     

Ion-selective electrode for gallium determination in nickel alloy, fly-ash and biological samples

A poly(vinyl chloride)-based membrane of 2,9-dimethyl-4,11-diphenyl-1,5,8,12-tetraazacyclotetradeca-1,4,8,11-tetraene (DDTCT) with sodium tetraphenyl borate (STB) as an anion excluder and dibutyl phthalate (DBP), dibutyl butylphosphonate (DBBP), tris(2-ethylhexyl) phosphate (TEP) and tributyl phosphate (TBP) as plasticizing solvent mediators was prepared and investigated as a Ga(III)-selective electrode. The best performance was observed with the membrane having the ligand-PVC-DBP-STB composition 1:4:1:1, which worked well over a wide concentration range (1.45 × 10⁻⁶ to 0.1 mol L⁻¹) with a Nernstian slope of 28.7 mV per decade of activity between pH 4.0 and 10.0. This electrode showed a fast response time of 12 s and was used over a period of 100 days with good reproducibility (s = 0.3 mV). The selectivity coefficients for monovalent, divalent and trivalent cations indicate excellent selectivity for Ga(III) ions over a large number of cations. Anions such as Cl⁻ and SO₄²⁻ do not interfere and the electrode also works satisfactorily in partially water-alcohol medium. The practical utility of the membrane sensor has also been observed in solutions contaminated with detergents, i.e., cetyltrimethylammonium bromide and sodium dodecyl sulfate and used for the determination of gallium in nickel alloy, fly-ash and biological samples.