Diffusion of Cesium Ions in Agar Gel Containing Alkali Metal Bromides

The present paper gives an account of different aspects of the tracer diffusion of Cs⁺ ions in alkali metal bromides. We have measured the diffusion coefficients, D, of cesium ions in 1% agar gel medium at 25 ^∘C using a zone-diffusion technique over a concentration range of 5 × 10⁻⁵ to 0.1 mol,dm⁻³. The values of the diffusion coefficients were found to deviate from theory, which are explained on the basis of different types of interactions occurring in the ion-gel-water system. The study is also focused on the effect of alkali metal bromides on the obstruction effect and activation energy for the tracer-diffusion of cesium ions in agar gel medium. It is observed that both parameters, extent of obstruction, ∝, and activation energy, E, decrease with increasing charge density of the cation of the supporting electrolyte. The influence of these trends is explained on the basis of competitive hydration between the ions and agar molecules, and the relative distortion in the water structure that is brought about by these different ions and agar molecules.     

The role of the solvent in equilibrium and kinetic aspects of metal chelate extractions

Equilibria and kinetics for the extraction of nickel(II) and copper(II) by 2-hydroxy-5-nonylbenzophenone oxime (LIX 65N) in seven organic solvent systems were studied in order to test the validity of several hypotheses related to the role of the solvent in equilibrium and kinetic aspects of metal chelate extraction. For the nickel—LIX 65N system, the extraction constant is essentially independent of the solvent system, whereas for the copper—LIX 65N system, the extraction constant is not independent of solvent; this indicates that while the stoichiometry of the nickel chelate remains the same in all solvents, that of copper does not. The observed rate constant for the nickel—LIX 65N extraction was found to vary inversely with the LIX 65N distribution constant as predicted from a mechanism involving slow formation of the 1:1 complex. The observed reaction rate constant for the copper—LIX 65N varied inversely with the square of the distribution constant, also in accordance with the previously postulated mechanism of the slow formation of the 2:1 copper complex. This study, therefore, unequivocally eliminates the interfacial mechanism in favor of the homogeneous chemical reaction mechanism for the extraction of metal ions by LIX 65N, as well as by other similar high-molecular-weight extractants.     

Apparent molal volumes of aqueous solutions of bis-tetraalkylammonium salts at 25°C: Methylene-group contribution to the limiting molal volume

Densities of aqueous solutions of a series of polymethonium chloride and bromide salts (CH₃)₃–N–(CH₂)_n–N–(CH₃)₃X₂ have been measured at 25°C. Apparent molal volumes have been calculated, and methylene-group contributions to the limiting apparent molal volumes °_v have been estimated. Constant values of the methylene-group contribution of 16.5 and 17.0 cm³-mole^–1 were obtained for the bromide and chloride salts, respectively. These values are consistent with methylene-group contributions reported for other series of organic electrolytes.     

Activities of Individual Ions From Infinite Dilution to Saturated Solutions

A new procedure, which provides a closer approximation for the junction potentials than the Henderson equation, is tested to reduce new emf data for the chloride ion in CsCl solutions and previously measured data for individual ions in aqueous solutions of KCl, NaCl, and NaBr. The liquid junction potential is calculated from numerical integration of its basic equation without assuming constant mobility or using concentrations instead of activities. The mean ionic activity coefficients of the salts, obtained from the activity coefficients of the individual ions, show good agreement with values reported in the literature. The activity coefficients of the individual chloride ion at 25°C in aqueous solutions of CsCl up to 3 molal and in KCl solutions were measured using a chloride ion-selective electrode. It has been confirmed that the activity of the chloride ion is equal to the activity of the cation in CsCl solutions and, contrary to the prediction of hydration theory, it is higher than the activity of the cation in aqueous KCl solutions. The New Hydration Theory has been developed to overcome the shortcomings of the older hydration theory and has been used to smooth the experimental activity coefficients of the individual ions in aqueous solutions and to extrapolate them up to the saturated solution.     

Chiral separation of dansyl amino acids by capillary electrophoresis: Comparison of formamide andN-Methylformamide as background electrolytes

Summary Chiral separation of 12 dansyl amino acids has been achieved by capillary electrophoresis using -cyclodextrin dissolved inN-methylformamide or formamide. The viscosity and the dielectric constants of these two solvents are very different, giving them disimilar electrophoretic properties. Intense electroosmotic flow, high electrophoretic mobilities and high efficiency were achieved inN-methylformamide, but high chiral selector concentration was needed for sufficient resolution. In contrast, the separation of dansyl amino acids in formamide was characterized by longer analysis time and lower efficiency, but the resolution and selectivity of the separation were better and baseline separation could be achieved at lower -cyclodextrin concentrations.     

Iridium Anodic Oxidation to Ir(III) and Ir(IV) Hydrous Oxides

Iridium oxide films (IROFs) are known to have an enhanced or the so‐called super‐Nernstian (<59 mV/pH) pH‐sensitivity. The intention in the present study was to find out the reasons of such behavior and also to elucidate the nature of iridium anodic oxidation processes. The methods employed were combined cyclic voltammetry and chronopotentiometry. Iridium layers of 0.1 to 0.2 μm thickness, deposited thermally on titanium or gold‐plated titanium substrates, were used for investigations. IROFs on the surface of working electrodes were formed anodically by applying a constant potential in deaerated and oxygen‐containing solutions of 0.5 M H₂SO₄, 0.1 M KOH and 0.5 M H₃PO₄+KOH. Linear pH‐dependences of the stationary open‐circuit potential with the slopes close to 59 mV/pH were found for iridium electrode oxidized at 0.4 V–0.8 V (RHE) in deaerated and at 0.8 V–1.2 V (RHE) in O₂‐containing solutions. They were attributed to reversible Ir/Ir(OH)₃ and Ir/ IrO₂?nH₂O metal‐oxide electrodes, respectively. It has been suggested that the main current peaks seen in the voltammograms of iridium electrode in acid and alkaline solutions are of different nature. The difference between iridium electrode surface states in acid and alkaline solutions has been presumed to be the main reason of super‐Nernstian pH‐sensitivity of the IROFs. On the basis of the results obtained standard potential of Ir/Ir(OH)₃ electrode and the solubility product of Ir(OH)₃ have been evaluated: =0.78±0.02 V and K_sp=3.3×10^?64.     

Novel siloxane polymers as polymer electrolytes for high energy density lithium batteries

A variety of disubstituted (double-comb) polysiloxane polymers have been prepared containing linear, branched, and cyclic oligoethyleneoxide units, –(OCH₂CH₂)_n–, in the side chains and as part of the siloxane backbone. Copolymers, using mixtures of linear ethylene oxide side chains, were also synthesized. These polymers were doped with LiN(SO₂CF₃)₂ (LiTFSI, 1) and conductivities of the polymer-salt complexes were determined as a function of temperature and doping level. The maximum conductivity of these polymers at 25 ° C was 2.99 ×10^–4, for a copolymer containing equimolar amounts of side chains with n = 5 and 6.     

Evaluation of single-ion conductances in nonaqueous solvents at 25°C by the use of tetrabutylammonium tetrabutylboride as a reference electrolyte

Precise conductances for tetrabutylammonium tetrabutylboride (Bu₄NBBu₄) at 25°C have been measured in a number of nonaqueous solvents, and the data have been analyzed by the 1957 Fuoss-Onsager conductance equation. Limiting ion conductances for the Bu₄N⁺ ion at infinite dilution ₀(Bu ₄ N ⁺) in various solvents have been evaluated by dividing ₀ values of the salt into two equal parts. The ₀(Bu ₄ N ⁺) values so obtained are in fairly good agreement (within±0.1–3.5%) with the corresponding values determined from direct transference number measurements in these solvents.     

The relaxation field for the general case of electrolyte mixtures

The relaxation field for solutions of mixed electrolytes of any type is calculated. the calculation is based on the well-known treatment due to Fuoss-Onsager with the same distance parameter for all the ions in solution. A general conductance-continuity equation has been established and an improved iterative method of calculation, using Laplace transforms, is proposed. The relaxation-field results are derived to the second iteration in the perturbation method of integration.     

Electroconduction of Potassium Orthophosphate Modified with Triple-Charged Cations

Solid electrolytes in the systems K_{3 – 3x} Me _x PO₄ (Me = Sc, Y, In, La, Nd, Gd, Tb) are synthesized. Their phase composition and the temperature and concentration dependences of their electroconductivity are studied. In all the systems there form solid solutions based on K₃PO₄, which have a high potassium cation conductance. The latter is due to the formation of potassium vacancies at substitutions 3K⁺ Me³⁺ and, at lower temperatures, to stabilization of a high-temperature -modification of potassium orthophosphate. The electroconductivity of synthesized solid solutions, which equals (4–7) × 10^–3 and 10^–1 S cm^–1 at 300 and 700°C, is similar to that of solid electrolytes K_{3 – x} P_{1 – x} E _x ^VIO₄ and K_{3 – 4x} E _x ^IVPO₄.