MgO、Al_2O_3、SiO_2催化剂上湿天然气中乙烷氧化脱氢的研究(英文)

研究了ＭｇＯ、Ａｌ２Ｏ３、ＳｉＯ２催化剂对湿天然气中乙烷氧化脱氢反应的影响，发现ＭｇＯ对乙烷脱氢有较好的活性，７００Ｃ时，Ｃ２Ｈ４选择性达４１．８５％，收率达１８．７５％。考察了催化剂酸碱性对反应的影响，适当碱性的催化剂有利于反应的进行，催化剂活性顺序与碱性大小顺序相一致为ＭｇＯ＞Ａｌ２Ｏ３＞ＳｉＯ２。催化剂活性顺序与其晶格氧流动性有顺应关系。     

Isolation of selenium organic species from antarctic krill after enzymatic hydrolysis

Total selenium content and its distribution in the soluble and insoluble protein-bound fractions obtained after aqueous extraction of antarctic krill samples were determined. About 26% of the total selenium (2.4 g g^–1 dry weight) was found in the supernatant; the rest was in the pellet. Isolation of low molecular selenium-containing fractions was also performed by enzymatic digestion of the protein, followed by size-exclusion chromatography in conjunction with atomic absorption spectrometry. From the applied various proteinases (pronase E, subtilisin Carlsberg, trypsin, chymotrypsin, proteinase and proteinase N from Bacillus subtilis and Novo 0.6 MPX enzyme), the treatment with pronase E led to best recovery of selenium. About 96% of the total Se was found in the hydrolysate, mainly in low molecular weight fractions. Eighty percent of the Se species were in fractions with molecular weights in the range of amino acids and short peptides. High-performance liquid chromatography/inductively coupled plasma mass spectrometry (HPLC-ICP-MS) allowed the identification of selenomethionine and the assumption that selenocystine or its derivatives were the main species in these fractions.     

Production and energetic use of biogas from energy crops and wastes in Germany

The production of biogas for reducing fossil CO₂ emissions is one of the key strategic issues of the German government and has resulted in the development of new process techniques and new technologies for the energetic use of biogas. Progress has been made in cultivating energy crops for biogas production, in using new reactor systems for anaerobic digestion, and in applying more efficient technologies for combined heat and power production. Recently, integration of fuel cells within the anaerobic digestion process was started, and new technologies for biogas upgrading and conversion to hydrogen were tested. This article describes the trends in Germany for achieving more efficient energy production.     

Minireview: Advances in Germanium Isotope Analysis by Multiple Collector–Inductively Coupled Plasma–Mass Spectrometry

The advent of multiple collector–inductively coupled plasma–mass spectrometry (MC-ICP-MS) has made the high-precision determination of Ge isotopes possible, which leads to the widespread application of Ge isotopes in earth, ocean, and cosmochemistry fields. This paper reviews the history of Ge isotope analysis, chemical dissolution and purification, and mass spectrometry measurements. Concentrated HNO₃ is sufficient to dissolve nearly all types of samples and HF is also involved for Si-rich samples. Low-temperature ashing prior to dissolution is an alternative way to preconcentrate Ge in organic-rich samples. For different matrices, Ge isotopes can be determined by MC-ICP-MS coupled with a traditional nebulizer system or hydride generation system after two-step separation, one step cation/anion-exchange separation, or Mg/Fe co-precipitation protocols. Ion-exchange column methods are suitable for samples with elevated matrix and Ge content such as sulfides, iron oxides, silicate rocks, and coals, whereas Mg or Fe coprecipitation methods are particularly suitable for all kinds of water. Hydride generation systems are improved over traditional nebulizer system due to the smaller sample quantity and fewer matrix-related interferences. Sample-standard bracketing, double spike, and external Ga isotope normalization are used to mass bias correction and yield consistent results. Analytical methods involving Ge-poor samples and Ge isotope analyses based on different Ge species or specific Ge compound in natural environment will be important prospects in the further study. For further applications of Ge isotopes in mineral deposits such as sulfide and iron oxide deposits, sulfides, and iron oxides reference materials should be developed in the future.     

Structures of oxaliplatin‐oligonucleotide adducts from DNA

Oxaliplatin, [(1R,2R)‐cyclohexane‐1,2‐diamine](ethanedioato‐O,O')platinum(II) shows a great efficiency against colorectal cancer. Although the mode of action of oxaliplatin is not yet understood, it is commonly accepted that binding of oxaliplatin to DNA prevents DNA synthesis and alters protein to DNA binding. In order to elucidate the modified DNA–protein interaction and thus to understand the mechanisms leading to cellular misinterpretation of DNA information and apoptosis, we have identified the preferential binding sites and the dynamics of the oxaliplatin‐DNA intrastrand and interstrand adducts at the oligomer level using high‐performance liquid chromatography/electrospray ionization‐tandem mass spectrometry (HPLC/ESI‐MS/MS) and HPLC/inductively coupled plasma‐MS for quantitative studies. We used a combination of benzonase, alkaline phosphatase and Nuclease S1 for digestion. This digestion procedure allows the study of platinated oligomeric nucleotides and more complex interstrand adducts. The digestion products were mostly chromatographically separated and characterized using HPLC/ESI‐ion trap MS/MS experiments. We could show that the adducts to guanine and adenine are quite dynamic; that is, the ratios are changing for several days. In addition, the resulting adducts provide evidence for the action of the digesting enzymes and indicate that the adduct spectrum at the oligomeric level is different to that at the commonly studies dinucleotide level. Copyright © 2012 John Wiley & Sons, Ltd.     

Synthesis of indolo[2,3-c]coumarins and indolo[2,3-c]quinolinones via microwave-assisted base-free intramolecular cross dehydrogenative coupling

A microwave-assisted base-free intramolecular cross dehydrogenative coupling (CDC) of 3-aniline substituted coumarins and quinolinones have been developed. A broad range of indolo[2,3-c]coumarins and indolo[2,3-c]quinolinones can be easily afforded in good to high yields (up to 93%) under palladium catalysis. The method is among the most straightforward and convenient ways to access these fused polyheterocycles.     

自动石墨消解–电感耦合等离子体质谱法同时测定左氧氟沙星胶囊中7种金属元素

建立自动石墨消解-电感耦合等离子体质谱法(ICP-MS)同时测定左氧氟沙星胶囊中铅、铬、砷、镉、锡、铝、铁7种金属元素含量的方法。以HNO3-H2O2()体积比为1∶1为消解体系,采用自动石墨消解法消解左氧氟沙星胶囊样品,消解液除酸后,用5%硝酸溶液定容至50 mL,采用电感耦合等离子体质谱法对消解液进行测定,以内标法定量。铅、铬、砷、镉、锡、铝、铁的质量浓度在0.05~20.0μg/mL范围内与质谱响应值成良好的线性关系,相关系数均大于0.998,方法检出限为0.119~1.323μg/kg。样品加标回收率为91.2%~105.5%,测定结果的相对标准偏差为1.67%~3.46%(n=6)。该方法样品前处理简单,检出限低,测定结果准确,适用于左氧氟沙星胶囊等沙星类抗生素中多种金属元素残留的测定。     

A mass conservative well‐balanced reconstruction at wet/dry interfaces for the Godunov‐type shallow water model

This paper presents a novel mass conservative, positivity preserving wetting and drying treatment for Godunov‐type shallow water models with second‐order bed elevation discretization. The novel method allows to compute water depths equal to machine accuracy without any restrictions on the time step or any threshold that defines whether the finite volume cell is considered to be wet or dry. The resulting scheme is second‐order accurate in space and keeps the C‐property condition at fully flooded area and also at the wet/dry interface. For the time integration, a second‐order accurate Runge–Kutta method is used. The method is tested in two well‐known computational benchmarks for which an analytical solution can be derived, a C‐property benchmark and in an additional example where the experimental results are reproduced. Overall, the presented scheme shows very good agreement with the reference solutions. The method can also be used in the discontinuous Galerkin method. Copyright © 2016 John Wiley & Sons, Ltd.     

Differential isotope dansylation labeling combined with liquid chromatography mass spectrometry for quantification of intact and N-terminal truncated proteins

The N-terminal amino acids of proteins are important structure units for maintaining the biological function, localization, and interaction networks of proteins. Under different biological conditions, one or several N-terminal amino acids could be cleaved from an intact protein due to processes, such as proteolysis, resulting in the change of protein properties. Thus, the ability to quantify the N-terminal truncated forms of proteins is of great importance, particularly in the area of development and production of protein-based drugs where the relative quantity of the intact protein and its truncated form needs to be monitored. In this work, we describe a rapid method for absolute quantification of protein mixtures containing intact and N-terminal truncated proteins. This method is based on dansylation labeling of the N-terminal amino acids of proteins, followed by microwave-assisted acid hydrolysis of the proteins into amino acids. It is shown that dansyl labeled amino acids are stable in acidic conditions and can be quantified by liquid chromatography mass spectrometry (LC–MS) with the use of isotope analog standards.     

Influence Du Rapport Atomique Ca/P Initial Sur La Synthèse Sous Atmosphère Humide D’apatite

Abstract

Le comportement sous atmosphère humide des mélanges initiaux de la calcite et du di-ammonium hydrogénophosphate à différents rapport atomique (Ca/P)_initiala été étudié. L’analyse par diffraction des rayons X (DRX) montre que les produits obtenus ont tous une structure apatitique. Il montre la présence à côté de celle de l’apatite, des raies identifiables à la calcite pour des rapports atomiques initiaux supérieurs à 1.50. Par ailleurs, la spectroscopie d’absorption infrarouge (IR) révèle dans les différents cas, la présence autre que les bandes attribuables aux ions PO₄ ^3?dans une apatite, des bandes à 875 cm^?1caractéristique des groupements HPO₄ ^2?dans une apatite déficiente en ion calcium. De même, le traitement thermique à 1000°C des poudres synthétisés a mis en évidence que les apatites formées sont non st?chiométriques. Les analyses chimiques montrent, par ailleurs, que lorsque le rapport atomique Ca/P du mélange initial est inférieur à 1.50, l’apatite formée a un rapport atomique Ca/P égal à 1.58. Par contre, lorsque le rapport Ca/P initial est supérieur à 1.50, le produit formé est biphasique et a un rapport atomique Ca/P de 1.62. Ce rapport est dû essentiellement à la présence d’un excès de CaCO₃dans le mélange initial (DRX, IR).

Mots clés Apatite; atmosphère humide; calcite; hydrothermal; synthèse

Abstract The behavior, in a humid atmosphere, of the initial mixtures of calcite and diammonium hydrogenophosphate at different atomic ratio (Ca/P) was studied. The X-ray diffraction (XRD) analysis shows that all the products obtained have apatite structure. For initial atomic ratios greater than 1.50, the XRD analysis shows the presence of reflections different from those of apatite, which may be attributed to calcite. Analysis by infrared (IR) absorption spectroscopy allows to distinguish between the two cases: in addition to the presence of bands due to the PO₄ ^3?ions in apatite further bands at 875 cm^?1characteristic of HPO₄ ^2?in apatite deficient with respect to calcium ions are observed. Similarly, the powders synthesized by heat treatment at 1000°C showed that nonstoichiometric apatites are formed. Chemical analyses show, that when the atomic ratio Ca/P of the initial mixture is less than 1.50, the apatite formed has an atomic Ca/P ratio of 1.58. When the initial Ca/P ratio is greater than 1.50, the product formed is biphasic and has an atomic ratio Ca/P of 1.62. This result is mainly due to the presence of an excess of CaCO₃in the original mixture (XRD, IR).