Catalytic wet air oxidation of oleic acid on ceria-supported platinum catalyst.effect of pH

Summary Catalytic wet air oxidation (CWAO) of oleic acid was carried out in a batch reactor on platinum supported ceria catalyst (Pt/CeO₂). Oleic acid is a water insoluble linear unsaturated fatty acid of 18 carbon atoms. To increase the homogeneity of the solution by saponification, the influence of NaOH additions in oleic acid CWAO mechanism and catalyst performances have been investigated. The oxidation of such molecule occurs by two types of mechanisms: successive carboxy-decarboxylation which leads essentially to CO₂and/or C-C bonds splitting in the alkyl chain inducing a high formation of acetic acid. With or without NaOH, the 5%Pt/CeO₂catalyst is active in the conversion of oleic acid and selective to carbon dioxide. In alkaline medium, oleic acid is initially saponified which increases the solubility of the reactant before it to be oxidized. Finally the oxidation is slightly delayed by the presence of NaOH. The catalyst characterizations show no significant difference before and after reaction.</o:p>     

Determination of trace elements in ambient aerosol samples

A microwave-assisted digestion procedure using HNO₃, HF, and H₂O₂ has been developed for analysis of elements in ambient particulate matter (PM). The samples are collected on cellulose filters and analyzed by inductively coupled plasma mass spectrometry (ICP-MS). The ICP-MS is calibrated with external standards, and recovery of analytes is tested with NIST SRM 1648 Urban Dust. This method has been used to quantify the airborne concentrations of a large number of elements, including Ag, As, Ba, Be, Ca, Cd, Ce, Co, Cr, Cs, Cu, Fe, Ga, K, Li, Mg, Mn, Mo, Ni, Pb, Rb, Se, Sb, Sr, Ti, Tl, V, and Zn. For the majority of these elements, recovery of the NIST SRM is within 15% of the certified values.     

Microwave-assisted synthesis of 1-aryl-3-acetyl-1,4,5,6-tetrahydrobenzimidazo[1,2-d][1,2,4]triazine: first example of a novel ring system

Novel highly functionalized benzimidazoles were synthesized in two steps by microwave irradiation: construction of the benzimidazole ring followed by ring closure to the new tricyclic system.     

Sodium bromide catalysed one-pot synthesis of tetrahydrobenzo[b]pyrans via a three-component cyclocondensation under microwave irradiation and solvent free conditions

Sodium bromide catalysed three-component cyclocondensation of aryl aldehydes, alkyl nitriles and dimedone proceeds under microwave irradiation in solvent free conditions to give highly functionalised tetrahydrobenzo[b]pyrans in excellent yields.     

Application of the microwave acid digestion method to the decomposition of rock samples

The microwave acid digestion method was applied to the decomposition of rock samples and optimum conditions were investigated. Samples of 10–100 mg were decomposed by changing the amount and composition of acid, heating time and number of reheating steps and then the concentrations of Si, Fe, Mn, Na, K and Mg in these samples were measured. The concentrations agreed with reported values when 10 mg of sample were decomposed by heating for 60 s with 0.3 ml of concentrated HNO₃ and 0.1 ml of concentrated HF. Similarly, 100 mg of sample were also decomposed successfully by heating for 45–110 s with 0.3–1.0 ml of concentrated HNO₃ and 0.4–0.7 ml of concentrated HF. It is concluded that the microwave acid digestion method decomposes rock samples with a very short heating time and with small amount of reagents compared with methods using conventional sealed PTFE vessels, which require several hours for the heating step and several millilitres of reagents.     

LiMn2O4的湿法合成及锰的光度法测定研究

The LiMn₂O₄ spinel was prepared by wet method using Li₂CO₃， Mn(CH₃COO)₂·4H₂O and CO₂ as raw ma-terials. The products were measured by TG/DTA， XRD， IR. The results Showed that the sample calcined at 800℃ for 10h was well crystallized monophase product. The contents of Mn(Ⅲ) and Mn(Ⅳ) of LiMn₂O₄ spinel were determined simultaneously by spectrophotometric analysis with pyrophosphoric acid.     

Pressurized wet digestion in open vessels

The High Pressure Asher (HPA-S) was adapted with a Teflon liner for pressurized wet digestion in open vessels. The autoclave was partly filled with water containing 5% (vol/vol) hydrogen peroxide. The digestion vessels dipped partly into the water or were arranged on top of the water by means of a special rack made of titanium or PTFE-coated stainless steel. The HPA-S was closed and pressurized with nitrogen up to 100 bars. The maximum digestion temperature was 250 °C for PFA vessels and 270 °C for quartz vessels. Digestion vessels made of quartz or PFA-Teflon with volumes between 1.5 mL (auto sampler cups) and 50 mL were tested. The maximum sample amount for quartz vessels was 0.5–1.5 g and for PFA vessels 0.2–0.5 g, depending on the material. Higher sample intake may lead to fast reactions with losses of digestion solution. The samples were digested with 5 mL HNO₃ or with 2 mL HNO₃+6 mL H₂O+2 mL H₂O₂. The total digestion time was 90–120 min and 30 min for cooling down to room temperature. Auto sampler cups made of PFA were used as digestion vessels for GFAAS. Sample material (50 mg) was digested with 0.2 mL HNO₃+0.5 mL H₂O+0.2 mL H₂O₂. The analytical data of nine certified reference materials are also within the confidential intervals for volatile elements like mercury, selenium and arsenic. No cross contamination between the digestion vessels could be observed. Due to the high gas pressure, the diffusion rate of volatile species is low and losses of elements by volatilisation could be observed only with diluted nitric acid and vessels with large cross section. In addition, cocoa, walnuts, nicotinic acid, pumpkin seeds, lubrication oil, straw, polyethylene and coal were digested and the TOC values measured. The residual carbon content came to 0.2–10% depending on the sample matrix and amount.     

Effect of tetrahydrofuran on the conductance and ion-pairing of hydrogen chloride in wet and dry methanol mixtures

The molar conductance of dilute solutions of HCl in wet (68.5% methanol + 31.5% tetrahydrofurane mixtures at 25°C have been measured. The data were analyzed using the Fuoss-Hsia equation to calculate the infinite dilution molar conductances and association constants. The trend of the limiting conductances in these mixtures as a function of the water content shows, once more, the peculiar minimum due to the anomalous proton conductance mechanism. From these data the limiting molar conductance in the anhydrous binary solvent system was evaluated. The percentage excess proton mobility with respect to potassium ion has also been determined. All these data are compared to those found in a binary isodielectric methanol mixture containing as cosolvent 1,4-dioxane. This comparison shows that proton mobilities are very similar in both solvent mixtures. The dielectric constants, refractive indices, viscosities and densities of the methanol-tetrahydrofuran mixtures in the whole mole fraction range have been measured and are reported. An analysis of the excess molar volumes and viscosities shows a slight deviation of this system from ideality.     

Rapid and efficient microwave-assisted synthesis of 5-amino-3-aralkoxy(methoxy)amino-1,2,4-oxadiazoles

The microwave-assisted synthesis of 5-amino-3-aralkoxy(methoxy)amino-1,2,4-oxadiazoles starting from N¹-aralkoxy-(methoxy)-N³-cyano-O-phenylisoureas and hydroxylamine is described. N¹-Aralkoxy(methoxy)-N³-cyano-O-phenylisoureas are readily accessible by treatment of diphenyl N-cyanimidocarbonate with O-substituted hydroxylamines.     

Simple Method for Simultaneous Determination of Selenium and Arsenic in Human Hair by Means of Atomic Fluorescence Spectrometry with Hydride Generation Technique

This study describes a simple, rapid and reliable method for simultaneous determination of selenium and arsenic in human hair by means of atomic fluorescence spectrometry combined with a hydride generation technique (HG-AFS). The procedure developed encompasses microwave digestion of a sample in the nitric acid environment only. The interferences caused by nitrous oxides are eliminated by removing a gas from above the digested solution with a stream of argon. The sample is then chemically treated in a flow-through hydride generation system and exposed to measurements in a double-channel atomic fluorescence spectrometer. The method permits determining both analytes in the linear range of 0.5–100µgL^–1 with a detection limit equal to 0.2µgL^–1, as well as with very good repeatability not exceeding 1% for Se and 2% for As. No mutual interferences from either of the analytes in the concentrations ranges matching the hair composition were found. The method was verified in terms of accuracy with the use of a reference material and then applied to the analysis of the natural samples of human hair.