软X光辐射烧蚀实验方法研究

 用强激光辐照金箔靶，以金箔背侧软X光辐射为基础，提出了软X光辐射烧蚀研究的新靶型、新方法，做了C₈H₈样品辐射烧蚀初步实验。     

Obtaining 4-vinylphenols by decarboxylation of natural 4-hydroxycinnamic acids under microwave irradiation

4-Vinylphenols, useful compounds for industrial applications, were obtained by decarboxylation of 4-hydroxycinnamic acids under microwave irradiation in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) as base and basic aluminum oxide as solid support. The reactions were fast (15-30 min). The selective extraction of the final products with ethyl acetate avoids chromatographic purifications. The conversions are quantitative and the yields are satisfactory. Only the unstable 4-vinylcatechol was obtained in moderate yield. This procedure was successfully extended to a natural sample of ferulic acid extracted from wheat bran to get the corresponding 4-vinylguaiacol, a FEMA GRAS (Flavor and Extract Manufacturer's Association; General Regarded as Safe) approved flavoring agent.     

微波消解ICP-AES法同时测定花岗石中铜、镉、铬和砷

本文采用微波消解和ICP－AES法，同时测定花岗石样品的铅、镉、铬、砷4有害元素，检出限分别为0．0008、0．0007、0．0018、0．0012μg.mL^-1,回收率为93．4％－102．5％，RSD为1．3％－3．6％，该法准确、快速、简便，结果令人满意。     

The flow of a variable viscosity fluid between parallel plates with shear heating

A model for the flow of a fluid through a channel with parallel plates is investigated. The channel is narrow, so that the lubrication approximation may be applied. The channel walls are maintained at a constant temperature. Shear heating effects are included and the fluid viscosity decreases exponentially with temperature. When the flow is driven solely by shear stress or imposed velocity at the top, analytical progress is possible. When pressure gradient also drives the flow the problem is solved numerically.     

Microwave absorption properties of composite powders with low density

The composites of barium ferrite coated on hollow ceramic microspheres were prepared using sol-gel technique. The crystal structure, morphology and microwave absorption properties of composite powders with different weight ratio of microspheres were studied with XRD, EDS, FESEM and vector network analyzer. The results show that the microwave absorption properties of composite powders are greatly improved. The maximum microwave loss of composite powders reaches 31 dB with an amount of 50 wt.% microspheres, and its density is only about 1.80 g/cm³. The effect of hollow ceramic microspheres on the microwave absorption property is also discussed.     

Mathematical topographical correction of XPS images using multivariate statistical methods

For rough heterogeneous samples, the contrast observed in XPS images may result from both changes in elemental or chemical composition and sample topography. Background image acquisition and subtraction are frequently utilized to minimize topographical effects so that images represent concentration variations in the sample. This procedure may significantly increase the data acquisition time. Multivariate statistical methods can assist in resolving topographical and chemical information from multispectral XPS images. Principal component analysis (PCA) is one method for identification of the highest correlation/variation between the images. Topography, which is common to all of the images, will be resolved in the first most significant component. The score of this component contains spatial information about the topography of the surface, whereas the loading is a quantitative representation of the topography contribution to each elemental/chemical image. The simple‐to‐use self‐modelling mixture analysis (Simplisma) method is a pure variable method that searches for the source of most differences in the data and therefore has the potential to distinguish between chemical and topographical phases in images. The mathematical background correction scheme is developed and validated by comparing results to the experimental background correction for samples with differing degrees of topography. Copyright © 2004 John Wiley & Sons, Ltd.     

An Efficient Method for the Synthesis of 3-Cyano-6-hydroxy-2(1H)-pyridinones under Microwave Irradiation and Solvent-free Conditions

Summary. Three component condensation of alkylacetoacetates, primary amines, and alkyl cyanoacetates catalyzed by solid supports under microwave irradiation gave N-alkyl 3-cyano-6-hydroxy-2(1H)-pyridinones with high yields. Upon carrying out the reaction under the same condition on acidic alumina, zeolite HY, silica gel, and montmorillonite K-10, the best yields were achieved by silica gel. Corresponding author. E-mail: balalaie@yahoo.com Received August 28, 2002; accepted September 3, 2002     

Evaluation of closed-vessel microwave digestion method for the determination of trace impurities in polymer-based photoresist by inductively coupled plasma mass spectrometry

A closed microwave digestion method followed by inductively coupled plasma spectrometric (ICP-MS) analysis was evaluated for the determination of trace impurities in photoresist. To optimize the digestion procedure, several digestion parameters such as acid, heating temperature and heating time were evaluated. Besides, the digestion efficiency of used photoresist material and the recovery of analyte elements obtained by the use of gravimetric method and ICP-MS measurement, individually, were also compared to clarify the completeness of digestion. According to our experiments, the gravimetric method was found to be not so relevant to the completeness of digestion, because the remaining sample matrix could cause suppression effect in the subsequent ICP-MS measurement. In view of minimizing blank value and working time, a simple single-step heating program was proposed to mineralize 0.25 ml of photoresist material with 5 ml of nitric acid at 180 °C for 10 min. Based on the comparative study of the analytical results obtained by instrumental neutron activation analysis (INAA) and proposed method, the reliability of proposed method for the determination of trace metallic impurities in photoresist material has been confirmed.     

延长速调管使用寿命的方法

描述了一种延长EPR波谱仪中速调管使用寿命的方法.根据这种方法,只要正确地调谐微波桥的工作状态和适当地调整功率电平器的功率校正电平.即使对于已经严重老化的速调管仍然可以继续使用一段时间,维持仪器的正常运行.     

Some time change representations of stable integrals, via predictable transformations of local martingales

From the predictable reduction of a marked point process to Poisson, we derive a similar reduction theorem for purely discontinuous martingales to processes with independent increments. Both results are then used to examine the existence of stochastic integrals with respect to stable Lévy processes, and to prove a variety of time change representations for such integrals. The Knight phenomenon, where possibly dependent but orthogonal processes become independent after individual time changes, emerges as a general principle.