基于Green-Naghdi模型与三相延迟模型的耦合热弹性波传播

研究了基于G-N模型与三项延迟模型的热弹性波的传播特征.在各种广义热弹性理论中,热位移概念的引入使得G-N模型具有独特性质而引起广泛的关注和应用.基于G-N模型,最近一个三相延迟模型被提出.主要研究了这两种模型下第一和第二声波(耦合热弹性波)的色散和衰减特性,分析了温度场和位移场在两种模型下的振幅比和相位差.结果发现三...     

Decomposition Reaction of Zn-MPA（3-Mercaptopropionic Acid） Complex Under Microwave Irradiation

The thermal decomposition of Zn-MPA complex was investigated under microwave irradiation. ZnO and ZnS nanocrystals could be obtained by decomposing Zn-MPA（3-mercaptopropionic acid） complex under different reaction conditions. It was found that both the pH value of the solution and the molar ratio of Zn2＋ and MPA can play an important role in the formation of ZnO and ZnS nanocrystals. MPA mainly acts as an S source or as a complexing agent. This study provides a new route for the controllable preparation of semiconductor nanocrystals.     

单谐振腔外部Q值的计算方法

 通过对带有耦合器的单驻波腔进行等效电路分析,推导出可计算带有耦合波导的单谐振腔外部Q值的反射相位法,该方法通过计算不同频率的反射相位来确定谐振频率和外部Q值。详细叙述了在CST Microwave Studio中用谐振模式求解法、直接时域跟踪法和反射相位法进行计算的步骤;用这3种方法分别计算了二次发射微波电子枪的外部Q值并和实验测量结果做了比较。结果显示3种计算方法都有很高的精度,但反射相位法的速度最快,耗时1 071 s。计算发现外部Q值与耦合口长度的4.1次方成反比。     

一种基于热离子二极管的大功率微波探测器

 主要给出了波导型的X波段大功率微波探测器的结构、标定方法和标定结果。该新型大功率微波探测器具有承受微波峰值功率高（可达100 kW）,时间响应快（响应时间小于2.0 ns）,不需要同步信号,抗干扰能力强等特点。根据不同的需要,可以制作成波导型和同轴型的大功率微波探测器。波导型探测器由热离子二极管、标准波导、滤波器和外电路组成,其工作频率范围为波导的工作频率范围;而同轴型探测器由热离子二极管、同轴波导,滤波器和外电路组成,可以宽带使用。标定结果表明该探测器很适合高功率微波峰值功率测量,尤其是在强电磁干扰环境和高重频微波脉冲条件下的测量,为解决功率测量不准的技术难题提供一种有效的技术手段。     

迭代法分析圆环类微带行波天线的辐射特性

利用圆环类微带行波天线的辐射功率与等效行波磁流衰减常数之间的自洽关系,导出了计算衰减常数的迭代方程;为加快迭代速度,将辐射积分中的格林函数展开成柱面波函数,得到快速收敛的级数和.最后给出了方向图的计算曲线,与实验结果对比吻合良好,表明此方法模拟圆环类微带行波天线辐射特性的有效性.     

有雨概率与分维数关系的初步研究

对武汉地区１９８２～１９９４年有雨分维数与有雨概率之间的关系进行了初步的分析和研究，并给出了研究结果．为今后修改降雨衰减预报模型作准备．     

Temperature Effects on Attenuation Due to Rain for Millimeter and Centimeter Waves

Radio wave operating in millimetrewave and microwave frequency bands are adversely affected due to rain. Particularly the attenuation is of immense significance for sensitive remote measurements by satellites using frequencies greater than 10 GHz. Maintenance of an uninterrupted communication link requires a precise knowledge of the attenuation effect due to rain for commissioning right kind of transmitting sources for various purposes required in present day situation. Precise measurement of attenuation at various frequencies will enable us to choose the right frequency, polarization, incident angle and power of the source for different purposes. In this paper we have compared the results of earlier works using aR^b Olsen et al, (1) and the formulation by Moupfouma, (2) on the basis of theoretical analysis for explaining the observed results. Effect of temperature, considered in detail in this communication, has contributed the necessary correction factor of the rain attenuation for explaining the observed results. Theoretical analyses to measure the attenuation of the propagating wave due to temperature variation in the rain path have been presented. Correction factor due to temperature profile (temperature from the ground to the rain height within which the radio wave traces its path) has been incorporated in two models by using the concept of dipole energy changes. The effect of this temperature is noted to be quite significant and incorporates an error to the extent of 7–8%.     

一种用于电光开关的高速、高压电脉冲的产生

介绍了一种用于电光开关驱动源的高压超快电脉冲产生技术;电路采用级联的雪崩晶体管串和微波传输线结构,输出阻抗50Ω;在50Ω负载情况下,获得脉冲下降时间为1ns、幅度达到5kV、峰值电压为6.4 kV、幅度和半宽度稳定性优于2％、触发晃动为±15ps、触发延时为30 ns,脉冲峰值电流为128 A的高压高速大电流脉冲.     

Peak effect at microwave frequencies in swift heavy ion irradiated YBa2Cu3O7-δ thin films

The vortex dynamics at microwave frequencies in YBa₂Cu₃O_7-δ (YBCO) films have been studied. We observe a peak in the microwave (4.88 and 9.55 GHz) surface resistance in some films in magnetic fields up to 0.8 T. This is associated with the ‘peak-effect’ phenomenon and reflects the order-disorder transformation of the flux line lattice near the transition temperature. Introduction of artificial pinning centers like columnar defects created as a result of irradiation with 200 MeV Ag ion (at a fluence of 4×10¹⁰ ions/cm²) leads to the suppression of the peak in films previously exhibiting ‘peak effect’.     

计入地面附加衰减的声屏障插入损失估算方法*

基于理论推导和计算,给出了公路声屏障声学设计中,在考虑地面附加衰减情况下计算插入损失的方法。该方法综合考虑了有限长线声源无限长声屏障绕射声衰减量、有限长线声源地面衰减量及遮蔽角对插入损失的影响。通过与《声屏障声学设计和测量规范》（HJ/T90-2004）的计算结果的对比,验证了本文所给方法的精确性及可行性,并对规范所给地面衰减修正量进行了商榷。最后,给出了当预测点位于有限长路段中央法线上时,通过计算线声源地面衰减量得到计算插入损失所需参数值,再计算插入损失的简便方法。本研究为存在地面附加衰减情况下有限长声屏障插入损失计算提供了一个新的参考方法。