Chiral discrimination of a helically organized crown ether array parallel to the helix axis of polyisocyanate

The asymmetric polymerization of 4′‐isocyanatobenzo‐18‐crown‐6 with the lithium amide of (S)‐(2‐methoxymethyl)pyrrolidine successfully proceeded to afford end‐functionalized poly(4′‐isocyanatobenzo‐18‐crown‐6) with (S)‐(2‐methoxymethyl)pyrrolidine (polymer 2 ). In the circular dichroism (CD) spectrum of 2 , a clear positive Cotton effect was observed in the range of 240–350 nm corresponding to the absorption of the polymer backbone, indicating that 2 partially formed a one‐handed helical structure, which was preserved by the chirality of (S)‐(2‐methoxymethyl)pyrrolidine bonding to the terminal end in 2 . In the titration experiments for the CD intensity of 2 in the presence of D ‐ and L ‐Phe·HClO₄ (where Phe is phenylalanine), a small but remarkable difference was observed in the amount of the chiral guest needed for saturation of the CD intensity and in the saturated CD intensity, indicating that the extremely stable, one‐handed helical part should exist in the main chain of 2 , which was not inverted even when the unfavorable chiral guest for the predominant helical sense, L ‐Phe·HClO₄, was added. In addition, helical polymer 2 exhibited a chiral discrimination ability toward racemic guests; that is, the guests were extracted from the aqueous phase into the organic phase with enantiomeric excess. The driving force of the chiral discrimination ability of 2 should certainly be attributed to the one‐handed helical structure in 2 . © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 325–334, 2006     

Application of an integrated microchip system with capillary array electrophoresis to optimization of enzymatic reactions

In this work, a combination of complementary metal-oxide semiconductor (CMOS) microchip system with capillary array electrophoresis (CAE) is demonstrated as a system for optimizing conditions for enzymatic reaction. Dimethylacridinone (DDAO)-phosphate substrate and alkaline phosphatase conjugate were selected for the enzymatic reaction, which was applicable to the enzyme-linked immunosorbent assay (ELISA) technique. Laser-induced fluorometry with a miniature semiconductor laser was used to detect the enzymatic products. The speed of the enzymatic reaction between the DDAO-phosphate and the alkaline phosphatase conjugate was investigated as a function of reaction time. The microchip-CAE detection system could determine the pH condition and the concentration of enzyme that are suitable for rapid and low-cost analysis. This result shows the feasibility of using the microchip-CAE system for application to miniaturized screening systems.     

Synthesis of mono meso-pyridyl 21,23-dithiaporphyrins and unsymmetrical non-covalent porphyrin dimers

A new method has been developed to synthesize 21,23-dithiaporphyrins having one pyridyl group at the meso position. The method required easily available unknown precursors and the condensation resulted in mono meso-pyridyl 21,23-dithiaporphyrins as single products in 8-11% yield. Two of the three mono meso-pyridyl N₂S₂ porphyrins were used to synthesize non-covalent unsymmetrical porphyrin dimers containing one N₂S₂ and one N₄ porphyrin cores.     

圆柱类构件超声相控阵聚焦模型

在利用平面相控阵超声换能器对圆柱类构件检测时,受曲界面结构引起的入射波和回波时延的影响,扫描声束的波阵面产生弯曲,在利用传统迭代遍历算法计算延迟时间时效率低,无法发挥相控阵换能器检测优势。针对上述问题,建立了一种基于圆柱类构件特征和耦合介质特性的超声相控阵扫描成像的聚焦模型。该模型基于换能器、耦合介质、圆柱类构件材料特性和几何关系以及声线模型和折射定律,建立了耦合介质及被检构件的声速、曲面曲率半径、阵列与曲面间的距离等关联的延迟时间聚焦控制模型。利用该模型计算出的延时时间,对各阵元发射时间进行控制,从而实现扫描声束的聚焦。该文以液体和有机玻璃制介质楔块为例,对圆柱钢曲面的相控阵声束聚焦进行了仿真实验,结果表明该文方法计算效率显著提升,同时声束可以在预设位置实现聚焦,验证了该模型在计算效率上的优势与有效性。     

铜电路板缝腐蚀过程缝隙中pH、Cl-浓度分布的测量

根据铜电路板缝腐蚀特征,研制了阵列式Ag/AgCl、IrO2电极,设计缝隙腐蚀模拟装置,在0.5mol.L-1的NaCl溶液中分别同时原位检测电子线路板缝隙腐蚀过程,缝隙内的氯离子浓度分布、pH分布及其随时间的变化.研究表明,在电子线路板发生缝隙腐蚀的过程中,缝隙内部不同深度的Cl-及H+浓度逐渐增大,且随着与缝口距离的增大而增大,从而导致缝隙腐蚀不断向纵深方向发展.     

Construction of Binary Quantum Error-Correcting Codes from Orthogonal Array

By using difference schemes, orthogonal partitions and a replacement method, some new methods to construct pure quantum error-correcting codes are provided from orthogonal arrays. As an application of these methods, we construct several infinite series of quantum error-correcting codes including some optimal ones. Compared with the existing binary quantum codes, more new codes can be constructed, which have a lower number of terms (i.e., the number of computational basis states) for each of their basis states.     

导电聚苯胺线膜修饰ZnO纳米棒阵列的可控制备及其紫外探测性能

基于p-n结的光生伏特效应可构筑性能优异的UV探测器,本文采用水热法可控制备竖直排列的氧化锌纳米棒阵列(n型ZnO-NRs),利用原位聚合法在ZnO-NRs表面上修饰p型聚苯胺线膜(PANI-NWs),再组装成ZnO-NRs与ZnO-NRs/PANI-NWs紫外探测器.通过扫描电镜(SEM)、X射线衍射仪(XRD)、紫...     

Load optimal design for a primary test stand facility based on a zero-dimensional load model

In order to couple the numerical simulation of a primary test stand driver with an optimal load design, a zero-dimensional wire array load model is designed based on the Saturn load model using PSPICE, which is an upgraded version of the Simulation Program with Integrated Circuit Emphasis (SPICE) designed by the ORCAD Corporation to perform circuit simulations. This paper calculates different load parameters and discusses factors influencing the driving current curve. With appropriate driving current curves chosen, further magneto-hydrodynamic calculations are carried out and discussed to provide the best results for experiments. The suggested optimal load parameters play an important role in experimental load design.     

L波段高功率线极化径向线阵列天线理论分析与数值模拟

 探索了L波段的高功率线极化径向线阵列天线。基于三角形栅格形式实现了径向线圆形平面阵列天线,分析并给出了径向线并联馈电网络,并以同轴馈电的水平单圆环线极化天线为基础,利用径向线并联馈电网络设计出了间距小于一个波长下L波段高功率线极化径向线阵列天线。研究结果表明：这种结构实现径向线阵列天线的线极化辐射是可行的,该天线在中心频率1.57 GHz下,增益为19.97 dBi,轴比为-52.06 dB,反射系数为0.105 2;在1.37～1.77 GHz的频率范围内增益大于18.64 dBi,轴向轴比值小于-46.45 dB。     

微射流阵列冲击恒热流壁面换热数值模拟

微射流冲击作为一种高热流冷却技术,在大功率激光器、微电子芯片等微型高热流器件冷却方面有广阔应用前景.本文对微射流阵列冲击恒热流表面的换热情况进行数值模拟,详细分析了微射流阵列的换热特点,对比了射流孔顺排和叉排方式的冷却性能,得出射流入口雷诺数、射流孔间距、射流高度等因素对冷却特性的影响规律.