酯化交联聚乙烯醇膜用于渗透气化法分离EtoH／H2O的研究

合成了一系列磷酸和二元羧酸酯化交联改性的聚乙烯醇(PVA)膜,研究了它们用于水-乙醇混合液的渗透气化分离规律。磷酸改性的PVA膜具有较大的通量,当料液浓度为50%时,通量可达1200g/m~2·hr.,分离系数α_(H_2O/EtOH)=10。丙二酸改性PVA膜在料液浓度为50%时,通量可达800g/m~2·hr.,且α_(H_2O/EtOH)=18。并作了这两种膜的通量和分离系数随料液浓度的变化曲线。草酸交联的PVA膜具有较高的分离系数,但通量很小。求出了水、乙醇及总的表现渗透活化能。     

Synthesis of Some Allyl-β-Cyclodextrin Derivatives and their Properties as Capillary GC Stationary Phases

Summary Three -Cyclodextrin derivatives (-CDs) were synthesized by substituting the 2,6-OH groups of -CD with allyl groups and the 3-OH groups with three different acyl groups (valeryl, heptanonyl, octanoyl). The chromatographic properties of these -CDs as stationary phases for capillary gas chromatography (CGC) were studied. The test results showed that the three -CDs possessed good coating properties and that the capillary columns coated with them exhibited high column efficiency. These -CDs can separate not only the disubstituted benzene isomers but also some racemic compounds.     

Synthesis of Polyacrylaminothiourea Chelating Fiber and Properties of Concentration and Separation of Trace Noble Metal Ions from Samples

A novel polyacrylaminothiourea chelating fiber was synthesized simply and rapidly from nitrilon (an acrylonitrile-based synthetic fiber), which was applied to preconcentrate and separate of trace amount of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ） and Ir (Ⅳ） ions from solution of samples.The analyzed ions can be quantitatively concentrated by the fiber up to a flow rate of 20.0mL/min at pH2, and can also be desorbed with 15 mL of 4mol/L HCl 3% thiourea from the fiber column with recoveries of 96.5%-100%.The chelating fiber can be reused for ten times,the recoveries of these ions are still over 92%,and hundred to thousand times of excess of Fe(Ⅲ）,Al（Ⅲ）,Ca(Ⅱ），Mg（Ⅱ）,Ni(Ⅱ）,Mn（Ⅱ),Cu(Ⅱ），Zn(Ⅱ），and Cd(Ⅱ） cause no interference on the determination of the analyzed ions by inductively-coupled plasma atomic emission spectrometry (ICP-AES).The static saturation adsorption capacities of the fiber for the analytes are in the range of 1.15-2.80mmol/g.The relative standard deviations for the determination of 20.0ng/mL each of Au(Ⅲ）,Pt(Ⅳ）,Pd(Ⅳ）and Ir(Ⅳ） are in the range of 0.7%-3.0%.The recoveries for test from standard additions to real solution samples are between 96% and 100%.The concentration of each ion in powder sample detected by the method is in good agreement with the certified value.     

Thermally reversible light scattering films based on the melting/crystallization of organic crystals dispersed in an epoxy matrix

Films that can be reversibly switched from opaque to transparent states by varying temperature (TRLS films), have potential applications in thermal sensors, optical devices, recording media, etc. A dispersion of organic crystals in a thermoset may be used for these purposes provided that at temperatures higher than the melting point there is a matching of refractive indices of both phases. A model system consisting on a dispersion of diphenyl (DP) crystals in an epoxy matrix based on diglycidyl ether of bisphenol A and m-xylylenediamine, was analyzed as a possible TRLS film encapsulated between transparent covers to avoid sublimation of DP. To obtain a uniform dispersion of DP-rich domains in the epoxy matrix by polymerization-induced phase separation, it was necessary to add 5 wt% of polystyrene (PS) to the initial formulation. Phase separation induced by polymerization at 80 °C led to a dispersion of PS/DP domains in the epoxy matrix due to the low compatibility of PS with the epoxy and its high compatibility with DP. Crystallization and melting processes were confined to the interior of dispersed domains leading to an excellent reproducibility of the optical properties of TRLS films in the course of successive heating-cooling cycles.     

Supramolecular structures of macromolecules containing bipyridine–copper(I) complexes as revealed from transmission electron microscopy studies

Transmission electron microscopy (TEM) studies on bipyridine (bpy) containing block copolymer systems showed the formation of nanoscopic polymer–ion complexes through complexation with copper(I) ions which segregated to highly ordered columnar domains of mesoscopic dimensions. The domains, i.e. stacks of [(bpy)₂Cu(I)] complex moieties could be visualized by complementary TEM techniques. First, electron energy loss spectra (EELS) showed the absorption edges of copper and nitrogen, which are specific for the bipyridine copper complexes. The element spectroscopic imaging (ESI) technique allowed the imaging of the net copper and net nitrogen distribution, and the coinciding pictures exhibited a microphase separated system in the case of a 3-block copolymer with complexed end segments. High resolution elastic bright field images showed interference lines with a line to line distance of about 8 A which could be related to the Cu–Cu distance in staggered Cu(I)–bipyridine complexes. Received: 6 August 1997 Accepted: 28 April 1998     

Chiral separation of the four stereoisomers of a novel antianginal agent using a dual cyclodextrin system in capillary electrophoresis

Reported here is an analytical method enabling the stereochemical resolution of a new antianginal compound possessing two stereogenic centers, leading to four stereoisomers. Only one of these isomers is currently under development as a novel antianginal agent and consequently, the other three isomers are considered as unwanted chiral impurities. Therefore, an enantioselective method is required in order to check its enantiomeric purity. This paper presents a method exploiting the high efficiency of capillary electrophoresis and the complexing properties of cyclodextrins to achieve the separation of the four stereoisomers of this weakly basic compound (pKa = 7.4). For this purpose, the combination of a neutral cyclodextrin, hydroxypropyl-gamma-cyclodextrin (HP-gamma-CD), and an anionic cyclodextrin, carboxymethyl-beta-cyclodextrin (CM-beta-CD), was added to the separation buffer running in an uncoated silica capillary. After selection of the suitable cyclodextrin system, satisfactorily separation conditions were as follows: 30 mM phosphate buffer (pH 6.4) containing 10 mM of HP-gamma-CD and 10 mM of CM-beta-CD, running voltage +30 kV. The resulting run time and resolutions were respectively about 17 min and between 1.95 and 2.84. Linearity curves (0.993 < r2 < 0.998) are also shown.     

环境和生物样品中铂族金属的分析研究进展

评述了近年来环境和生物样品中痕量铂族金属的分析研究进展，重点介绍了样品的预处理和分离富集技术以及检测手段等。     

Photo-induced Charge Separation of p-Tricyanovinyl-N,N-Dialkylanilines

In this paper,p-tricyanovinyl-N,N-dialkylanilines were synthesized as model compounds and through their spectroscopic behavior,the photo-induced electron transfer,charge separation were discussed and the aggregation in DMSO-H_2O system was investigated.     

铜、钴、镍同时分离工艺的研究

稀土体系三种元素同时分离的工艺最近已有发表,但非稀土方面的工作尚未见报导.对Cu、Co、Ni三种元素,通常是将Cu、Co作为一个组份与Ni分离.本工作对组成为Cu:Co:Ni=1:1:1的水相合成料液设计了两种工艺,进行了串级实验,实现了该三种元素的同时分离, 串级实验以HEH(EHP)作萃取剂,煤油为稀释剂,其它试剂均用分析纯.     

Characterization of fuel samples by on-line LC-GC with automatic group-type separation of hydrocarbons

Characterization of fuels by LC-GC is possible by use of automatic successive transfer (multiple transfer) of HPLC fractions to a GC via an on-column interface. This paper describes the instrumentation and the methodology for the HPLC separation of the hydrocarbons (aliphatic and aromatic) into separate groups and the on-line transfer of these groups to a capillary GC column. Two HPLC methods were used with the same valve configuration: single column (silica) with column back-flush to detector; and double column (silica and amino-bonded silica) with multiple fraction transfer and back-flush. The first method was used for the analysis of total saturated compounds and total aromatic compounds; the second was used for the separation of the one-, two-, three-, and four-ring aromatic compounds present in diesel fuels. Examples are shown of the characterization of diesel fuels, and the repeatability of the data.