THERMODYNAMIC STUDY OF ADSORPTION OF PHENOLIC COMPOUNDS FROM AQUEOUS SOLUTION BY A WATER-COMPATIBLE HYPERCROSSLINKED POLYMERIC ADSORBENT

Equilibrium data for the adsorption of phenolic compounds, i.e., phenol, p-cresol, p-chlorophenol and p-nitrophenol from aqueous solutions by a water-compatible hypercrosslinked polymeric adsorbent (NJ-8) within temperature range of 283-323 K were obtained and correlated with a Freundlich-type of isotherm equation, so that equilibrium constants KF and n were obtained. The capacities of equilibrium adsorption for all the four phenolic compounds on the NJ-8 from aqueous solutions are around 2 times as high as those of Amberlite XAD-4, which may be attributed to the unusual micropore structure and the partial polarity on the network. The values of the enthalpy (always negative) are indicative of an exothermic process, which manifests the adsorption of all the four phenolic compounds on the two polymeric adsorbents to be a process of physical adsorption. The negative values of free energy change show that the solute is more concentrated on the adsorbent than in the bulk solution. The absolute free energy values of adsorption for NJ-8 are always higher than those for Amberlite XAD-4, which indicates that phenolic compounds are preferentially adsorbed on NJ-8. The negative values of the adsorption entropy are consistent with the restricted mobilities of adsorbed molecules of phenolic compounds as compared with the molecules in solution. The adsorption entropy values of phenolic compounds for NJ-8 are lower than those for Amberlite XAD-4, which means the micropores of NJ-8 require more orderly arranged adsorbate.     

Microporous, fast response cellulose ether hydrogel prepared by freeze-drying

A simple and effective method of preparing fast-response gels is developed. The freeze-drying and subsequent rehydration of thermosensitive gels alters the microstructural properties of the gels in a way that leads to rapid shrinking rates. Microporous hydroxypropyl cellulose (HPC) gels were created by this method to investigate the influence of the process on the swelling and shrinking kinetics of the gels in response to temperature changes. Micropores of different size ranges were produced by freezing gels with different amounts of water at −20 °C. Water content was the key factor to control the microporosity and the shrinking rates of gels. After the freezing treatment, an effective diffusion coefficient for shrinking could be determined by fitting Fick's law to the data (5.2 × 10⁻⁴ cm²/s). This was an increase of two orders of magnitude over that of the untreated, non-porous gel (6.0 × 10⁻⁶ cm²/s). The magnitude of the shrinking coefficient indicates that the shrinking rate of the microporous gel is probably limited by the convective flow, as unsteady flow through porous media follows the same differential equation as Fick's law, but with much greater transport coefficients, as observed here. Physically, the shrinking rate may be determined by the level of interconnected-cells in a microporous structure present at the beginning of shrinking process because the convection through the interconnected-cells is estimated to be much slower than the polymer network diffusion rate of the struts of micropores (0.1–3.0 μm) as well as heat transfer.     

Affinity adsorption of recombinant human interferon-α on a porous dye-affinity adsorbent

Interferons are potent biologically active proteins synthesized and secreted by somatic cells of all mammalian species. Dye-affinity adsorption is increasingly used for protein separation. Hollow fibers have several advantages as adsorbents in comparison to conventional bead supports because they are not compressible and they eliminate internal diffusion limitations. The aim of this study was to explore in detail the performance of polyamide hollow fibers to which Cibacron Blue F3GA was attached for adsorption of recombinant interferon-α (rHuIFN-α). The hollow fiber was characterized by scanning electron microscopy. These dye-carrying hollow fibers (35.8 μmol/g) were used in the rHuIFN-α adsorption-elution studies. The effects of initial concentration of rHuIFN-α, medium pH, ionic strength and temperature on the adsorption efficiency of dye-attached hollow fibers were studied in a batch system. The non-specific adsorption of rHuIFN-α on the hollow fibers was 1.2 mg/g. Cibacron Blue F3GA attachment significantly increased the rHuIFN-α adsorption up to 99.8 mg/g. Significant amount of the adsorbed rHuIFN-α (up to 94.8%) was eluted in 1 h in the elution medium containing 1.0 M NaCl. In order to determine the effects of adsorption conditions on possible conformational changes of rHuIFN-α structure, fluorescence spectrophotometry was employed. We resulted that dye-affinity hollow fibers can be applied for rHuIFN-α adsorption without causing any significant conformational changes. Repeated adsorption/elution processes showed that these dye-attached hollow fibers are suitable for rHuIFN-α adsorption.     

Reaction of 2,6-dibenzylidenecyclohexanone with phosphorus pentachloride: Triple functionalization of the isosemiquinoid system

The reaction of 2,6-dibenzylidenecyclohexanone with PCl₅ occursvia the sequential stages of desoxychlorination and substitutional phosphorylation to form (after oxidation, methoxylation, and hydrolysis on the surface of the chromatographic SiO₂ adsorbent) organophosphorus products of the 1-(a-chloro-, a-hydroxy-, or -alkoxy)benzyl-2-chloro-3-(-(dimethylphosphoryl)benzylidene)cyclobex-1-ene series.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 441–443, February, 1996.     

Estimation of micropore size distribution in active carbons from adsorption isotherms of water vapor

A possibility of estimation of the micropore size distribution in the carbon adsorbents with the developed micro-and mesoporous structure by analysis of the adsorption isotherms of water vapors was considered. At saturation water condenses in micropores in a form of a weakly compressed liquid. However, water molecules in micropores are packed not so closely as in the liquid because of steric hindrance. Therefore, the real density of water adsorbed in the micropores is lower than that of water adsorbed on an open surface and lower than the density of the normal liquid. An analysis of the adsorption isotherms of water vapors with account for the both opposite effects on the water density gives reliable data on the micropore sizes of the carbon adsorbents. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 40–43, January, 2007.     

Stability of workroom air volatile organic compounds on solid adsorbents for thermal desorption gas chromatography

The storage stability of the occupationally frequently occurring compounds, methylethylketone, methylisobutylketone, benzene, toluene, tetrachloroethylene, n-butylacetate, -pinene, β-pinene, limonene and n-decane, has been investigated on the adsorbents Tenax TA, Chromosorb 106 and Carbotrap using thermally desorbable tube type samplers, commonly utilized in ambient and workroom atmospheric measurements. Fifty and 500 ng of each compound were loaded on the various adsorbents tubes, stored at both ambient (20 °C) and refrigerated (4 °C) temperatures and analysed by means of thermal gas chromatography with mass spectrometric detection on days 0, 7, 14 and 28 after exposure. A 90% storage recovery was chosen as acceptance criteria for storage stability, and statistical testing by Student's t-test, analysis of variance and Bonferroni post hoc tests were employed to investigate the effect of the categorical variables storage time, storage temperature and analyte loading on the different adsorbents. Chromosorb 106 showed the overall best behaviour with recoveries of 90% or better for all analytes during the 28-day test period. Tenax TA and Carbotrap yielded lower recoveries and were more influenced by variations in storage time, storage temperature and analyte loading. Refrigerated temperatures were best avoided for storage on Tenax TA, but may increase the recovery of some compounds on Carbotrap (e.g. n-butylacetate). The blank build-up on the adsorbents was also investigated, and Carbotrap and Tenax TA showed no signs of artefact development over time. Chromosorb 106, however, contained inherently more artefacts that build up over time, which in spite of the excellent storage capability, may limit its use in field studies where long storage times are normal.     

Universal system for liquid stationary phase classification on the basis of thermodynamical data

Summary Equations modifying Rohrschneider's relationship between I and thermodynamical characteristics values are derived. Polarity in chromatography is discussed as a possibility of stationary phases or absorbents to enter into intermolecular interactions and is determined on the basis of the partial molar free energies of solution (G) of six test substances. A simple method for the calculation of stationary phase polarity in terms of G from retention indices and McReynolds constants is given. Equations are presented for the calculation of stationary phase selectivity utilizing G data tabulated for selected test substances. The thermodynamical basis of selecting a reference phase for a unified system expressing the selectivity of stationary phases which can also be applied for adsorbents is suggested. The energy equivalent to an index unit, G_i.u., is discussed.     

微孔型固体偏氟乙烯-六氟丙烯共聚物电解质

将固体聚合物电解质 (Ｓｏｌｉｄｐｏｌｙｍｅｒｅｌｅｃｔｒｏｌｙｔｅ)用于锂离子电池的研究已经有 3 0年的历史[1] ,从物理角度来看 ,研究过干态型 (ＤｒｙＳＰＥ)、凝胶型 (ＧｅｌｌｅｄＳＰＥ)和微孔型固体聚合物电解质 (ＰｏｒｏｕｓＳＰＥ)三大类型[2 ] ;从化学角度来看 ,研究过含氧、含氮、和含氟的等聚合物[1～ 6 ] .微孔型固体含氟聚合物电解质是近 1 0年来才开始研究并受到产业界很大关注的一种ＳＰＥ .固体聚合物电解质的应用可以解决液体电解质锂离子电池的漏液问题 ,并提高其安全性 ,还可以通过使用塑料包装来减小电池的重量…     

Application of kinetic investigations for interpretation ofn-hexane and benzene adsorption on active carbon

Differencies between the mechanism ofn-hexane and benzene adsorption on active carbon were investigated on the ground of kinetic measurements. As it has been stated, the kinetic measurements show fundamental differencies between the mechanism of adsorption in spite of analogy existing in the state of adsorption equilibrium. Within the range investigated, only the adsorption ofn-hexane follows the model of volume filling of micropores. Existence of those differencies is also confirmed by measurements of effective diffusion coefficient values as well as changes of activation energy of the diffusion—adsorption process.

---

Anwendung kinetischer Untersuchungen zur Interpretation des Adsorptionsverhaltens vonn-Hexan und Benzol an Aktivkohle

Zusammenfassung Mittels kinetischer Messungen untersuchte man die Unterschiede im Mechanismus des Adsorptionsverlaufes vonn-Hexan und Benzol an Aktivkohle. Man stellte fest, daß trotz der Analogie im Adsorptionsgleichgewichtszustand die kinetischen Messungen auf prinzipielle Unterschiede im Adsorptionsmechanismus hinweisen. Im untersuchten Bereich verläuft nur die Adsorption vonn-Hexane nach dem Modell der Mikroporenvolumenausfüllung. Die auftretenden Unterschiede wurden auch durch die Berechnungen der Werte der effektiven Diffusionskoeffizienten sowie Änderungen der Aktivierungsenergie des Diffusions-Adsorptionsprozesses bestätigt.

     

氢键构筑的新颖微孔配位聚合物[Co2(Hisor)2·(4,4′-bpy)2(H2O)2]·4,4′-bpy的合成与结构

A novel microporous coordination polymer [Co2(Hisor)2(4,4′-bpy)2(H2O)2]·4,4′-bpy was synthesized by hydrothermal reaction and characterized by single crystal X-ray diffraction, elemental analysis and IR spectrum. The crystal belongs to the monoclinic system and space group is P2/n with a=1.040 6(3) nm, b=1.138 8(4) nm, c=1.854 7(6) nm, β=102.991(6)°, V= 2.141 6(12) nm3, Z=2, Dc=1.443 Mg/m3, Mr=930.62, μ=0.842 mm-1, F(000)=952, GOF= 1.072, R=0.065 4, wR=0.146 8[I>2σ(I)]. There are two crystallographically independent Co(Ⅱ) ions in the title complex. The Hisor2- and 4,4′-bpy link the metal ions into 2D grids with dimension of 0.522 3 nm×1.138 8 nm. There are O—H…O and N—H…O hydrogen bonds in the complex resulting in the formation of 3D network with 1D channels, in which are free 4,4′-bpy molecules.