Characterization of Titania/Silica Gel by Means of Low-Pressure Nitrogen Adsorption

Adsorbents synthesized by grafting of titania onto mesoporous silica gel surfaces at different temperatures were studied by means of nitrogen adsorption–desorption and water desorption. The pore size distribution f(R_p) of titania/silica gel depends on the titania concentration (C_TiO2) and the temperature of titania synthesis. Nonuniformity of TiO₂ phase is maximal at a low C_TiO2 value (3.2 wt.% anatase deposited at 473 K), and two peaks of the fractal dimension distribution f(D) are observed at such a concentration of titania, but at larger C_TiO2 values, only one f(D) peak is seen. More ordered filling of pores and adsorption sites by nitrogen, reflecting in the shape of adsorption energy distributions f(E) at different pressures of adsorbate, is observed for adsorbent with titania (rutile+anatase) grafted on silica gel at a higher temperature (673 K).     

Shear and NMR experiments of materials with flow behaviour depending on the deformation history

Oxide ceramic masses react to simple shearing with hardening (peptisation: increase in the shear stress with the shear deformation). In the present study the correlation between the increase in the shear stress and the porosity, agglomeration processes and the type of flow are analysed. For this purpose oxide ceramic masses are tested in a shear device especially developed for pastes and analysed by rheometric experiments, NMR methods and particle size analysis. The results support the hypothesis that structural changes (hardening, increase in the mean porosity) of the material during the peptisation mainly depend on the magnitude and not on the kind of the energy input and thus of the type of flow. The fraction of bound (more generally, the immobilised) water increases with the shear displacement. Also crushing of primary particles could be observed. Both the crushing of solid particles causing an increased solid surface and the formation of a three-dimensional gel structure are microscopic effects capable of resulting in the binding or retaining water. On a macroscopic scale these phenomena cause hardening. Magnetic resonance imaging visualises flow-induced agglomerates, which form owing to the shear flow and increase the porosity averaged over the whole sample. After the shear experiment rolls of paste can be seen which indicate that the general assumption of a plane shear flow in the shear device is not warrantable. Received: 19 July 2001 Accepted: 25 October 2001     

Supramolecular Templating of Mesopores in Phase-Separating Silica Sol-Gels Incorporated with Cationic Surfactant

Silica gels with hierarchical macropores and mesopores have been prepared by inducing phase separation in the alkoxide-based sol-gel system with an addition of alkyltrimethylammonium salt. Narrowly distributed mesopores were observed in the heat-treated gel samples possibly as a result of supramolecular templating of silica oligomers in the reacting solution. The ionic attractive interaction and hydrophobicity of the attached alkyl group cooperatively determined the phase separation tendency. No indication of long-range order of the mesopores was obtained.     

乙醇 /水混合溶剂沉淀制备纳米BaF2及粒径控制

采用水和乙醇混合溶剂沉淀的方法制备了不同粒径的BaF₂纳米粉体。用XRD、TEM和FSEM表征了粉体的粒径和形貌。研究了陈化时间、水和乙醇的体积比对BaF₂纳米粉体的粒径和形貌的影响。结果表明，随混合溶剂中乙醇含量升高，沉淀粒径减小。BaF₂沉淀粒径的倒数和溶剂介电常数的倒数呈线性关系，据此关系可以控制BaF₂纳米粉体的粒径。     

Tertiary amine-mediated synthesis of microporous carbon membranes

Microporous carbon membranes were prepared on an -alumina support by a pyrolysis of cationic tertiary amine/anionic polymer composites. The precursor solutions contain a thermosetting resorcinol/formaldehyde (RF) polymer and a cationic tertiary amine. Three types of cationic tertiary amines with different chain lengths were used, such as tetramethlammonium bromide (TMAB), tetrapropylammonium bromide (TPAB) and cetyltrimethylammonium bromide (CTAB). A porous structure was produced by a decomposition of the amine and the resulting pores assisted the further gasification of the RF polymer at high temperature. The carbon/alumina membranes have thin and continuous carbon top layers with a thickness of 1 μm. Gas permeation tests were performed using single gases of CO₂, O₂, N₂, CF₄, n-C₄H₁₀ and i-C₄H₁₀, as well as binary mixtures of CH₄/n-C₄H₁₀ and N₂/CF₄ at different temperatures between 23 and 150 °C. The carbon membrane prepared using TMAB showed separation factors higher than 650 for the CH₄/n-C₄H₁₀ mixtures and higher than 8100 for the N₂/CF₄ mixture. From the permeation of pure gases with different molecular sizes, the pore sizes of the carbon membrane prepared using TMAB, TPAB and CTAB are estimated to be 4.0, 5.0 and larger than 5.5 Å, respectively, indicating that the micropore size of the carbon membranes is controllable by using different amines.     

Sodium hexadecanoate micellar aggregation number

The diffusion coefficient of sodium hexadecanoate micelles was studied by polarography at 63°C, and the size and aggregation number of the micelles was computed. At concentrations above 0.01 mol·L^–1 rodlike micelles exist, which become flexible at 0.040 mol·L^–1 and entangle at 0.043 mol·L^–1     

Grafting of maleic anhydride to hydrocarbons below the ceiling temperature

Maleic anhydride has been grafted to eicosane and squalane at 60–80°C using 1,2-dichlorobenzene as solvent and benzoyl peroxide as initiator. These hydrocarbons are low molecular weight models for hydrocarbon polymers containing secondary and tertiary hydrogen atoms. In the absence of the hydrocarbon and with monomer concentrations of the order of 1M, low molecular weight poly(maleic anhydride) is formed. On addition of the hydrocarbon, the main product is grafted material and very little homopolymer is formed. The grafts consist primarily of single succinic anhydride units but some of them are short poly(maleic anhydride) chains. Ceiling temperature considerations control the formation of homopolymer in the absence of hydrocarbon substrate. In the presence of eicosane or squalane, initiation of grafting proceeds by hydrogen abstraction from the hydrocarbon. The main factor controlling graft length is then the ratio of the rates of intramolecular hydrogen abstraction and of monomer addition to succinic anhydride radicals © 1995 John Wiley & Sons, Inc.     

Monte‐Carlo simulation of spatial distribution of characteristic x‐rays in multi‐film targets: source size of Al Kα x‐rays in W/Al film targets

A Monte‐Carlo simulation approach has been applied to describe the spatial distribution of characteristic x‐rays in W/Al film targets of different combinations of film thicknesses for the optimal design of a small‐sized x‐ray source having a high x‐ray intensity. The result has led to optimal combinations of W and Al film targets for 100 kV electrons, e.g. W(1 µm)/Al(20 µm), W(3 µm)/Al(15 µm) and W(5 µm)/Al(8 µm). These Al/W targets could be used as x‐ray sources for a medical instrument currently under development. Copyright © 2004 John Wiley & Sons, Ltd.     

On the Randić Index of Acyclic Conjugated Molecules

The Randić index of an organic molecule whose molecular graph is G is the sum of the weights (d(u)d(v))^−1/2 of all edges uv of G, where d(u) and d(v) are the degrees of the vertices u and v in G. We give a sharp lower bound on the Randić index of conjugated trees (trees with a perfect matching) in terms of the number of vertices. A sharp lower bound on the Randić index of trees with a given size of matching is also given Mei Lu: Partially supported by NNSFC (No. 60172005) Lian-zhu Zhang: Partially supported by NNSFC (No. 10271105) Feng Tian: Partially supported by NNSFC (No. 10431020)     

Role of micro-crystalline parameters in the physical properties of cotton fibers

Karnataka state in India is very well known for its cotton cultivation and there are innumerable varieties of these cotton fibers. Although, the yield and other types of characterization have been carried out on these fibers, the structure-property relation is not well studied till today. We have examined four different raw cotton fibers using Wide Angle X-ray Scattering (WAXS) technique and also we have computed micro-crystalline parameters. This study brings out the structure-property relation in cotton fibers.