Unusual peak defocusing in capillary GC on hexakis(2,6-diO-pentyl-3-O-acetyl)-α-cyclodextrin stationary phase

An unusual peak defocusing effect influencing chromatographic performance over a limited range of elution temperatures is described for hexakis(2,6-di-O-pentyl-3-O-acetyl)-α-cyclodextrin stationary phase. Since this phenomenon is likely to be dependent on minor details of the cyclodextrin molecule, full assignment of the ¹H- and ¹³C-NMR-spectra are given.     

Porous ceramic bed supports for fused silica packed capillary columns used in liquid chromatography

Porous ceramic bed supports for fused silica packed capillary columns utilized in liquid chromatography were prepared by polymerizing solutions containing potassium silicate in-situ within a column to create a mechanically stable, rugged, and easily constructed termination. The effect of the bed support length on efficiency, and comparisons to glass wool bed supports, were considered in terms of column efficiencies and hydrodynamic variables. Results obtained indicate better performance for the ceramic bed support.     

High temperature gas chromatography: The development of new aluminum clad flexible fused silica glass capillary columns coated with thermostable nonpolar phases: Part 1

With the simultaneous development of blank aluminum clad flexible fused silica glass capillary tubing capable of withstanding temperatures up to 500°C, coincident with a series of special high temperature methyl polysiloxane polymers, it was possible to produce for the first time, long lived fused silica capillary columns containing thin films of thermostable stationary phases which could be maintained isothermally at 400425°C and temperature programmed to 425–440°C. The “bleed rate” here for a well conditioned column was 5 picoamperes or less. Under these circumstances, alkanes with carbon numbers in the C-90 to C-100 area were rapidly and efficiently eluted from these columns. By extrapolation here, one can easily detect certain compounds with boiling points in the 750°C range. Since this type of capillary column was found to possess certain favorable properties, it was thought that it will soon replace the packed column and will probably be more popular than the borosilicate capillary column for many high temperature applications. Moreover, evidence has now accumulated which leads us to further believe that the majority of analyses of “high molecular weight” compounds performed by Supercritical Fluid Chromatography (SFC), utilizing very narrow bore fused silica capillary columns at several hundred atmospheres, can be much more simply, much more rapidly, much more economically, and much more efficiently accomplished by gas chromatography utilizing this new generation of high temperature capillary columns.     

Separation of fluorescent 1,N6 ethenoderivatives of diadenosine polyphosphates and their enzymatic degradation products by reversed-phase high-performance liquid chromatography

Summary The retention, selectivity and elution order of fluorescent 1,N⁶-etheno derivatives of diadenosine polyphosphates and their enzymatic degradation products on octadecyl and phenyl-bonded silica columns have been studied as a function of mobile phase pH, ionic strength and organic modifier content. Good separations of the compounds of interest were achieved using mobile phases of around 0.1M potassium phosphate buffers at neutral pH containing approximately 10% methanol or 4% acetonitrile for C₁₈ columns and 5% methanol or 1.5% acetonitrile for phenyl columns. The data obtained were used to establish isocratic assays for diadenosine polyphosphate cleaving activities from chromaffin cells using Di(1,N⁶-ethenoadenosine) polyphosphates as fluorogenic substrate analogues followed by fluorescence detection.     

Compehensive two-dimensional gas chromatography (GC×GC) and its applicability to the characterization of complex (petrochemical) mixtures

In general, petrochemical products contain only a limited number of chemical classes of compounds (sample dimensionality). The enormous number of individual components within these classes, however, soon puts limitations upon a single chromatographic technique when it comes to adequate characterization of these products. Comprehensive two-dimensional gas chromatography (GC×GC) clearly opens the possibility of estimating the composition of hydrocarbon mixtures in a far more detailed fashion than hitherto possible. Although the emphasis of papers of GCxGC thus far almost exclusively applies to the unsurpassed peak-capacity, in the oil industry there is a need for characterization, rather than for analyzing all the individual compounds. In principle a GCxGC system can provide an almost perfect match between its intrinsic properties and the dimensionality of oil samples. To establish the applicability of GCxGC towards petrochemical analytical challenges, a commercially aavailable prototype instrument was subjected to an exhaustive characterization of a typical hydrocarbon precess stream and a fast characterization of a light gas oil. Although there are no fundamental limitations towards the quantitative aspects of a GCxGC system, this paper confines itself to qualitative results only. Quantitative aspects of GCxGC will be published in a forthcoming paper.     

Determination of several sugars in serum by high-performance anion-exchange chromatography with pulsed amperometric detection

In this paper, a sensitive, simple and direct method for simultaneous determination of glucose, ribose, isomaltose and maltose in serum sample by high-performance anion-exchange chromatography coupled with integrated pulsed amperometric detection was developed. The four target analytes were easily and completely separated on an anion-exchange column at a flow-rate of 0.25 mL/min by binary step gradient elution in about 16 min and the two eluents were deionized water and 500 mM sodium hydroxide, respectively. The separated four analytes were detected directly by using a gold electrode and quadruple-potential waveform integrated pulsed amperometry without derivatization. Under the optimized conditions, when the injection volume was 25 microL, the detection limits (signal-to-noise ratio equal to 3) for glucose, ribose, isomaltose and maltose were 0.92, 7.50, 12.9 and 10.3 ng/mL, respectively. The calibration graphs of peak area for the four analytes were linear over two to three orders of magnitude with correlation coefficients greater than 0.998. R.S.D. of peak areas of the four analytes for five determinations were no more than 5.6%. The analytical method had been applied to the determination of glucose, ribose, isomaltose and maltose in real serum samples and good results with low relative standard deviation not more than 5.3% were obtained. The accuracy of the proposed method was tested by recovery measurements on spiked samples and good recovery results (98.1-107.9%) were obtained.     

A new method for the determination of mobile phase volume in normal and reversed-phase liquid chromatography

Summary A new method for the determination of the mobile phase volume (V _m) in liquid chromatography is presented based on the model regarding the retention of ionic solutes in the presence of eluent electrolytes. TheV _m value can be determined by measuring the retention volumes of two ions that have the same charge in two eluent electrolyte systems. Compared with the methods using isotopically labelled eluent components or inorganic salts asV _m markers, the method presented is proved to give more reasonableV _m values for both normal and reversed-phase liquid chromatography. As well as in binary mixed solvent systems, theV _m values in single solvent systems can be determined by this method.     

Analysis of Seven Herbicides by Gas-Liquid Chromatography

Simutaneous analysis of seven commonly used herbicides, 2,4-D methyl ester, 2,4-D methyl ester, 2,4,5-T methyl ester, silvex methyl ester, ramrod, CIPC and DEF, by gas-liquid chromatography with an electron capture detector was attempted. Two packed columns (which are generally used for the analysis of chlorinated pesticides) and two chemically bonded fused silica capillary columns were used for the analysis. When the packed columns were used, ramrod always interfered with the analysis of 2,4-D methyl ester and/or silvex methyl ester. Complete separation with reasonable analysis time can be achieved using one of the chemically bonded fused silica capillary columns.     

Chirality due to deuterium substitution: synthesis and circular dichroism of (+)(R) p -2,7-dideuterio-1,6-methano[10]annulene

Summary The title compound was prepared from (–)(S) _p -2,7-dibromo-1,6-methano[10]annulene by treatment withn-Bu-Li and subsequent quenching with D₂O. The optical rotations at four wavelengths and the circular dichroism spectrum are reported.

---

Chiralität durch Deuterium-Substitution: Synthese und Circulardichroismus von (+)(R) _p -2,7-Dideuterio-1,6-methano[10]annulen (Kurze Mitt.)

Zusammenfassung Die Titelverbindung wurde aus (–)(S) _p -2,7-Dibrom-1,6-methano[10]annulen durch Umsetzung mitn-Bu-Li und nachfolgende Reaktion mit D₂O dargestellt. Optische Rotationen bei vier Wellenlängen und das Circulardichroismus-Spektrum wurden bestimmt.

     

Prediction of retention time of phenols in liquid chromatography

The chromatographic behavior of phenols in reversed-phase mode liquid chromatography differs from that of non-ionic compounds such as alkyl alcohols, alkylbenzenes, halogenated benzenes, polyaromatic hydrocarbons, and aromatic acids. Therefore, the retention times of 61 phenols were measured in a system of an octadecyl bonded silica gel and acetonitrile/water mixtures. The logarithm of the capacity ratio (log k') was found to be a linear function of the hydrophobicity (log P) in acidic acetonitrile/water mixtures. This result was applied to a different octadecyl bonded silica gel. Eight phenols were selected as standard compounds, and their log k' values were measured in 0.05 M phosphoric acid in 10 to 90% acetonitrile/water mixtures. An empirical polynomial relation was obtained between the concentration of acetonitrile and the slope of the log k' vs log P curve. Finally the capacity ratio of all phenols were calculated in given eluents by the equations derived from the measurements of standard compounds and the calculated log P values. The difference between predicted capacity ratios and measured ones was within 10%.