AFM studies of metal deposition: instantaneous nucleation and the growth of cobalt nanoparticles on boron-doped diamond electrodes.

In situ atomic force microscopy (AFM) is used to study the growth of cobalt nuclei on a boron doped diamond electrode under potentiostatic control. The rate of growth of the nuclei at the electrode surface is monitored using AFM as a function of time at different deposition potentials. The nucleation of cobalt nuclei is found to be "instantaneous" and the growth of the nuclei is shown to be kinetically rather than diffusionally controlled over periods of tens and hundreds of seconds. At very short times (<10 seconds) the kinetics of nucleation are apparent.     

Ring-borylated 15-electron and 17-electron ansa-chromocene complexes, their physical properties and molecular structures

A detailed study of the thermal decomposition of the zwitterionic, ring-borylated ansa-chromocene hydrido carbonyl complex [Cr(CO)H{Me(4)C(2)(C(5)H(4))[C(5)H(3)B(C(6)F(5))(3)]}] (2) is described. This complex is formed in the reaction between [Cr(CO){Me(4)C(2)(C(5)H(4))(2)}] (1) and B(C(6)F(5))(3) in toluene at -78 degrees C. Above -25 degrees C, 2 decomposes to a 50:50 mixture of the low-spin, 17e Cr(III) complexes [Cr(CO){Me(4)C(2)(C(5)H(4))[C(5)H(3)B(C(6)F(5))(3)]}] (3b) and [Cr(CO){Me(4)C(2)(C(5)H(4))(2)}][HB(C(6)F(5))(3)] (4). Carbon monoxide elimination from 3 b generates high-spin, 15 e [Cr{Me(4)C(2)(C(5)H(4))[C(5)H(3)B(C(6)F(5))(3)]}] (3a), which coordinates two other electron-donating ligands, such as xylyl isocyanide, PMe3, and PPh(2)Me to form the low-spin, 17 e electron complexes 3c, 3d, and 3e, respectively. High-spin, 15 e [Cr{Me(4)C(2)(C(5)H(4))(2)}][HB(C(6)F(5))(3)] (5) is generated by heating 3 b in toluene at 100 degrees C and periodically removing the evolved CO. Efforts to isolate more than a few X-ray quality crystals of 5 were thwarted by its tendency to form an insoluble precipitate (6) with the same molecular formula. Heating the solution of 5 at 120 degrees C results in its partial conversion (ca. 28 %) to 3a, thereby allowing the formation of 3a in yields as high as 74 % from the reaction between 1 and B(C(6)F(5))(3). The X-ray crystal structures of 3 b-e and 5 are described. Cyclic voltammetry measurements on 3 a-e reveal a dramatic reduction in the redox potentials of the complexes relative to their non-borylated analogues. DFT calculations show that this is due primarily to electrostatic stabilization of the oxidized species by the negatively charged borylate group. EPR and 19F NMR spectroscopy allow 3a to be distinguished from its Lewis base adducts 3 b-e and reveal the relative affinities of different Lewis bases for the chromium.     

The fractal dimension as estimator of the fractional content of metal matrix composite materials

Electrochemical techniques are applied to estimate the fractal dimension value of electroactive surface structures. However, the fractal dimension value is an abstract concept, which sometimes is hard to understand. Herein, this abstract concept is used to calculate the fractional content of the nickel/graphite–polypropylene hybrid composite material, putting into practice this concept in the study of composite materials.     

Highly sensitive and reproducible cyclodextrin-modified gold electrodes for probing trace lead in blood

A highly sensitive and reproducible lead sensor based on a cyclodextrin-modified gold electrode was created. A self-assembled monolayer (SAM) of thiolated β-cyclodextrin (6-(2-mercapto-ethylamino)-6-deoxy-β-cyclodextrin (MEA-β-CD)) was prepared and modified on a gold electrode (MCGE) for specific Pb²⁺-sensing. Thus the mercury-free sensors for Pb²⁺ assay based on MCGE were established. A linear calibration response for Pb²⁺ was found in the range of 1.7 × 10⁻⁸ M to 9.3 × 10⁻⁷ M. The detection limit was 7.1 × 10⁻⁹ M (with S/N > 3), which was 10 times lower than other reported methods of detection Pb²⁺ with CD. The measurement results via this method for real blood samples were well agree with those obtained by ICP-AES, and thus presented a novel strategy in design of specific lead sensors with high sensitivity and stability for analysis of trace Pb²⁺ in real blood samples.     

Characterization and Applications of a Bismuth Bulk Electrode

A bismuth bulk electrode (BiBE), a new solid‐state electrode, is presented. The polycrystalline metal bismuth disk‐shaped electrode was examined for its anodic stripping voltammetry performance, which was found to be well comparable to that achieved with the bismuth or mercury film electrodes. Useful potential windows of the BiBE in aqueous solutions of pH 1 to 13 were found to range from approximately ?1.7 to ?0.1 V, depending on pH, where either hydrogen evolution or anodic dissolution of metallic bismuth limit the electrochemical inertness of the BiBE. Employing cyclic voltammetry (CV), the cathodic behavior of the BiBE was examined by testing inorganic (cadmium(II) ions) and organic (2‐nitrophenol) model compounds; a CV quasi‐reversible behavior was recorded in the case of the Cd(II)‐Cd(0) couple. The characteristics of the BiBE under anodic conditions, i.e., at bismuth surface coated with a thin conductive Bi₂O₃ film, was examined by testing two well‐established redox systems, potassium hexacyanoferate(III) and ruthenium(III) hexaaminechloride; a nearly reversible behavior was recorded in the latter case. Based on the presented preliminary results, BiBE can be considered as an interesting alternative to common solid and (toxic) mercury electrodes for possible use in electrochemical studies and electroanalytical applications.     

铁氰化镧修饰电极的制备及表征

An electroactive polynuclear inorganic compound of rare earth metal hexacyanoferrate, lanthanum hexacyanoferrate (LaHCF), was prepared by electrochemical deposition on the surface of a glassy carbon electrode with a potential cycling procedure. The cyclic voltammogram of LaHCF exhibits a pair of well-defined redox peaks with the formal potential of 208 mV (vs. SCE) at a scan rate of 100 mV/s in 0.2 mol/L NaCl solution and the redox peak currents increase linearly with the square root of the scan rate up to 1000 mV/s. The effects of the concentration of supporting electrolyte on the electrochemical characteristics of LaHCF were studied by voltammetry. LaHCF was also characterizated by scanning electron microscope (SEM), FTIR and XPS techniques.     

Evaluation of non-specific binding suppression schemes for neutravidin and alkaline phosphatase at the surface of reticulated vitreous carbon electrodes

Non-specific binding (NSB) of high-molecular-weight proteins onto electrode surfaces can complicate the application of electroanalytical techniques to clinical and environmental research, particularly in biosensor applications. We present herein various strategies to modify the surface of reticulated vitreous carbon (RVC) electrodes to suppress non-specific binding of biomolecules onto its surface. Non-specific binding and specific binding (SB) of two enzyme conjugates, neutravidin-alkaline phosphatase (NA-ALP) and biotinylated alkaline phosphatase (B-ALP), and also neutravidin itself, were studied using hydroquinone diphosphate (HQDP) as an enzyme substrate for ALP inside the pores of RVC electrodes that had been subjected to various modification schemes. The extent of NSB and SB of these biomolecules inside RVC pores was assessed by measuring the initial rate of generation of an electroactive product, hydroquinone (HQ), of the enzyme-catalyzed reaction, using linear scan voltammetry (LSV) for HQ detection. Electrodes functionalized with phenylacetic acid and poly(ethylene glycol) (PEG) showed low NSB and high SB (when biotin capture ligands were included in the modification scheme) in comparison with unmodified electrodes and RVC electrodes modified in other ways. A simple sandwich bioassay for neutravidin was performed on the RVC electrode with the lowest NSB. A concentration detection limit of 52 ± 2 ng mL⁻¹ and an absolute detection limit of 5.2 ± 0.2 ng were achieved for neutravidin when this assay was performed using a 100 μL sample size.     

Mechanism for nucleation and growth of electrochemical deposition of palladium(II) on a platinum electrode in hydrochloric acid solution

Palladium(II)and chloride ions tend to form complexes in aqueous solution.Both theoretical and experimental(by UV spectrum)results indicate that there are four complexes formed in aqueous solution containing 3 mol/L hydrochloric acid and 20mmol/L PdCl2.This work evaluates the kinetics of electrochemical deposition of palladium on a Platinum electrode.For this purpose,palladium electrodeposition was investigated by means of cyclic voltammetry(CV),potentiostatic current-time transients(CTTs)and Tafel curve.By CTTs curves,the regions corresponding to the charge transfer control,mixed control and diffusion control were identified.In the diffusion control region,palladium electrodeposition mechanism was characterized as progressive nucleation with three-dimensional(3D)growth under diffusion control;as for the mixed control region,an adsorption(IAds),ion transfer(IIT),and nucleation and growth(ING)model were proposed to analyze the current-time transients quantitatively,which could separate the IAds,IIT and ING perfectly.     

Theoretical Aspects of a Surface Electrode Reaction Coupled with Preceding and Regenerative Chemical Steps: Square‐wave Voltammetry of a Surface CEC’ Mechanism

Large number of lipophilic substances, whose electrochemical transformation takes place from adsorbed state, belong to the class of so‐called “surface‐redox reactions”. Of these, especially important are the enzymatic redox reactions. With the technique named “protein‐film voltammetry” we can get insight into the chemical features of many lipophilic redox enzymes. Electrochemical processes of many redox adsorbates, occurring at a surface of working electrode, are very often coupled with chemical reactions. In this work, we focus on the application of square‐wave voltammetry (SWV) to study the theoretical features of a surface electrode reaction coupled with two chemical steps. The starting electroactive form Ox_(ads) in this mechanism gets initially generated via preceding chemical reaction. After undergoing redox transformation at the working electrode, Ox_(ads) species got additionally regenerated via chemical reaction of electrochemically generated product Red_(ads) with a given substrate Y. The theory of this so‐called surface CEC’ mechanism is presented for the first time under conditions of square‐wave voltammetry. While we present plenty of calculated voltammograms of this complex electrode mechanism, we focus on the effect of rate of regenerative (catalytic) step to simulated voltammograms. We consider both, electrochemical reactions featuring moderate and fast electron transfer. The obtained voltammetric patterns are very specific, having sometime hybrid‐like features of voltammograms as typical for CE, EC and EC’ mechanisms. We give diagnostic criteria to recognize this complex mechanism in SWV, but we also present hints to access the kinetic and thermodynamic parameters relevant to both chemical steps, and the electrochemical reaction, too. Indeed, the results presented in this work can help experimentalists to design proper experiments to study chemical features of important lipophilic systems.     

Electronically varied manganese tris-arylacetamide tripodal complexes

Abstract

This report details the synthesis and characterization of six new Mn(II) complexes coordinated to systematically varied 2,2',2''-nitrilotris(N-arylacetamidate) ligands (L^R; R?=?NO₂, Cl, Br, H, Me, and OMe). The complexes are synthesized as the di-tetramethylammonium salts [Me₄N]₂[MnL^R(OAc)]. The nitro variant Mn^NO2 afforded crystals suitable for X-ray diffraction and its molecular structure is reported. We previously reported the crystal structures of Fe^NO2 and Zn^NO2 and additionally report herein the synthesis and characterization of Co^NO2. Using these four molecules, we conduct a brief comparison of the bond metrics to demonstrate that the primary difference governing structural changes is likely due to ionic crystal radii changes rather than electronic properties. The electrochemical properties of the Mn^R complexes were additionally explored with cyclic voltammetry, which revealed that the series is modulated by the various electronic substituents on the aryl groups of the ligands. The electrochemical studies also revealed, consistent with our previous report, that the acetate ligand on the Mn^R complexes is labile. Finally, a Hammett plot was constructed using the potentials obtained from cyclic voltammetry, which is compared with a few other similar transition metal complexes.