A study of surface modification and anchoring techniques used in the preparation of monolithic microcolumns in fused silica capillaries

Based on a survey of the literature on pretreatment of fused silica capillaries, 3 etching procedures and 11 silanization protocols based on the vinylic silane 3-((trimethoxysilyl)propyl) methacrylate (gamma-MAPS) were found to be most representative as a means of ensuring attachment of in situ prepared vinylic polymers. These techniques were applied to fused silica capillaries and the success in establishing the intended surface modification was assessed. X-ray photoelectron spectroscopy (XPS) was used to characterize the chemical state of the surface, providing information regarding presence of the reagent bound to the capillary. Wetting angles were measured and correlated with the XPS results. An adherence test was done by photopolymerization of a 2 mm long plug of 1,6-butanediol dimethacrylate in the prepared capillaries and evaluation of its ability to withstand applied hydraulic pressure. SEM was also performed in cases where the plug was released or other irregularities were observed. Finally, the roughness of the etched surface, considered to be of importance, was assessed by atomic force microscopy. Alkaline etching at elevated temperature provided a surface roughness promoting adhesion. The commonly used silanization protocols involving water in the silanization or washing steps gave inadequate surface treatment. The best silanization procedure was based on toluene as a solvent.     

A fractal graph model of capillary type systems

Abstract

We consider blood flow in a vessel with an attached capillary system. The latter is modelled with the help of a corresponding fractal graph whose edges are supplied with ordinary differential equations obtained by the dimension-reduction procedure from a three-dimensional model of blood flow in thin vessels. The Kirchhoff transmission conditions must be satisfied at each interior vertex. The geometry and physical parameters of this system are described by a finite number of scaling factors which allow the system to have self-reproducing solutions. Namely, these solutions are determined by the factors’ values on a certain fragment of the fractal graph and are extended to its rest part by virtue of these scaling factors. The main result is the existence and uniqueness of self-reproducing solutions, whose dependence on the scaling factors of the fractal graph is also studied. As a corollary we obtain a relation between the pressure and flux at the junction, where the capillary system is attached to the blood vessel. This relation leads to the Robin boundary condition at the junction and this condition allows us to solve the problem for the flow in the blood vessel without solving it for the attached capillary system.     

Microchip electrophoresis of Alu elements for gender determination and inference of human ethnic origin

We performed a series of multi‐locus PCRs followed by the rapid and efficient microchip electrophoretic sorting of Alu products with LIF detection. Five polymorphic human‐specific Alu insertions (RC5, A1, PV92, TPA and ACE) were used for inference of human ethnicity and two monomorphic Alu insertions for sex typing, one fixed on the X chromosome (AluSTXa) and the other on the Y chromosome (AluSTYa). These markers were used to generate unique DNA profiles for five different DNA samples. The PCR‐based assays used primers that flank the insertion point to determine genotypes based on the presence or absence of the Alu element. A1, RC5, PV92, TPA and ACE were used for ethnicity determinations and have two alleles, each indicating the presence (+) or absence (?) of the Alu element on the paired chromosomes, which results in three genotypes (+/+, +/? or ?/?). RC5 and A1 did not show ethnic heterogeneity resulting in a homozygous (?/?) genotype, which correctly inferred that DNA samples originating from a Caucasian male and an Asian male were not of African ancestry. The results from the five Alu markers indicated that these Alu loci could assist in identifying the individual's ethnicity using microchip electrophoresis in under 15 min of separation time. Using microchip electrophoresis and mixed genotype ratios, male DNA‐to‐female DNA of 1:9, corresponding to a ratio of Y‐to‐X chromosomes of 1:19, was also detected for both AluSTXa and AluSTYa to provide gender identification without requiring separation of female from male cells prior to the assay.     

Analysis of 5-methyltetrahydrofolate in human blood, serum and urine by on-line coupling of capillary isotachophoresis and zone electrophoresis

The predominant circulating folate coenzyme in plasma/serum, 5‐methyltetrahydrofolate (5‐MTHF) was determined in human blood, serum and urine using a method based on the hyphenation of capillary ITP and zone electrophoresis. Measurements were done with a commercially available instrument for capillary isotachophoresis equipped with a column‐switching system. The choice of electrolytes was limited by the instability of 5‐MTHF and volatility of electrolytes for the potential coupling of the instrumentation with MS detector. To get an insight into the separability of individual sample components in an isotachophoretic analysis, we constructed zone existence diagrams for isotachophoretic electrolyte systems having a leading electrolyte composed of acetate and ammonium of pH 4.5 and 7.0, hydrocarbonate and ammonium, pH 7.8, chloride and ammonium, pH 5.6, and chloride and creatinine, pH 5.0, with hydroxide ion as the terminator. For isotachophoretic preseparation, the non‐volatile leading electrolyte with good buffering capacity composed of 1×10⁻² M HCl and 2.5×10⁻² M creatinine, pH 5.0, and terminating electrolyte composed of 1×10⁻² M MES was selected as the most suitable. The optimum BGE for CZE analysis from the standpoint of analyte stability, separability and volatility for MS coupling was 1×10⁻² M acetate with 3.5×10⁻² M ammonium, pH 4.5. Using this combination of electrolytes, LODs reached with optical detection at 220 nm were 1.6×10⁻⁷ M in human blood, 1.1×10⁻⁷ M in human serum and 4.7×10⁻⁶ M in human urine. Estimated content of 5‐MTHF in blood and serum samples of women following oral daily administration of 0.8 mg of folic acid was 1.2×10⁻⁵ and 5.8×10⁻⁶ M, respectively.     

Versatile microanalytical system with porous polypropylene capillary membrane for calibration gas generation and trace gaseous pollutants sampling applied to the analysis of formaldehyde, formic acid, acetic acid and ammonia in outdoor air

The analytical determination of atmospheric pollutants still presents challenges due to the low-level concentrations (frequently in the μg m⁻³ range) and their variations with sampling site and time. In this work, a capillary membrane diffusion scrubber (CMDS) was scaled down to match with capillary electrophoresis (CE), a quick separation technique that requires nothing more than some nanoliters of sample and, when combined with capacitively coupled contactless conductometric detection (C⁴D), is particularly favorable for ionic species that do not absorb in the UV-vis region, like the target analytes formaldehyde, formic acid, acetic acid and ammonium. The CMDS was coaxially assembled inside a PTFE tube and fed with acceptor phase (deionized water for species with a high Henry's constant such as formaldehyde and carboxylic acids, or acidic solution for ammonia sampling with equilibrium displacement to the non-volatile ammonium ion) at a low flow rate (8.3 nL s⁻¹), while the sample was aspirated through the annular gap of the concentric tubes at 2.5 mL s⁻¹. A second unit, in all similar to the CMDS, was operated as a capillary membrane diffusion emitter (CMDE), generating a gas flow with know concentrations of ammonia for the evaluation of the CMDS. The fluids of the system were driven with inexpensive aquarium air pumps, and the collected samples were stored in vials cooled by a Peltier element. Complete protocols were developed for the analysis, in air, of NH₃, CH₃COOH, HCOOH and, with a derivatization setup, CH₂O, by associating the CMDS collection with the determination by CE-C⁴D. The ammonia concentrations obtained by electrophoresis were checked against the reference spectrophotometric method based on Berthelot's reaction. Sensitivity enhancements of this reference method were achieved by using a modified Berthelot reaction, solenoid micro-pumps for liquid propulsion and a long optical path cell based on a liquid core waveguide (LCW). All techniques and methods of this work are in line with the green analytical chemistry trends.     

A fluorescent derivatization method of proteins for the detection of low‐level impurities by microchip capillary gel electrophoresis

A novel pre‐chip fluorescent derivatization method is presented for protein sizing and quantification by microchip CGE. The derivatization reaction employed a water‐soluble and stable fluorescent dye and was performed under conditions that favored the formation of homogeneous reaction products. The method delivered in terms of protein sizing similar results as microchip CGE with on‐chip staining but showed an extended linear dynamic range for protein quantification encompassing four orders of magnitude. The sensitivity of the method was similar to standard silver‐stained planar gels. The characterization of derivatization reaction products by MS and preparative isoelectric focusing indicated that a constant degree of dye molecule tagging was obtained over a broad range of protein/dye ratios. The method allowed detecting and quantifying an impurity spiked into an antibody preparation down to a level of 0.05%. Advantages of this method compared with CGE approaches with pre‐column derivatization include a shorter analysis time and an increased robustness and ease of use.     

Highly sensitive determination of recombinant human erythropoietin-α in aptamer-based affinity probe capillary electrophoresis with laser-induced fluorescence detection

Recombinant human erythropoietin-α (rHuEPO-α) has been widely used in clinic for anemia treatment. The detection and quantification of rHuEPO-α is essential for monitoring this widespread recombinant glycoprotein pharmaceutical. In this paper, we developed a new affinity probe capillary electrophoresis/laser-induced fluorescence (APCE/LIF) method for the detection of rHuEPO-α by using a specific single-stranded DNA aptamer probe for the first time. In this method, the complex of aptamer-rHuEPO-α and the free aptamer can be well separated and identified by their migration and fluorescence intensity after systematic optimization. The existence of sodium cation in the sample buffer and running buffer played a critical role for stabilizing complex and enhancing the separation efficiency, additionally, suitable high voltage and sample buffer additives were also important for improving the peak height of the complex. Under the optimized conditions, the method was successfully applied for the quantification of rHuEPO-α in physiological buffer, artificial urine and human serum. The linear range for rHuEPO-α was from 0.2 to 100 nM and the limit of detection was 0.2 nM (i.e. 7.4 ng/mL). Further binding experiments using fluorescein isothiocyanate-labeled rHuEPO-α (F-rHuEPO-α) and N-deglycosylated F-rHuEPO-α demonstrated that the oligosaccharides moiety was of importance in the specific interaction between rHuEPO-α and its aptamer.     

Simultaneous determination of atropine,anisodamine, and scopolamine in plant extract by nonaqueous capillary electrophoresis coupled with electrochemiluminescence and electrochemistry dual detection

A rapid and simple method was demonstrated for the analysis of atropine, anisodamine, and scopolamine by nonaqueous capillary electrophoresis (NACE) coupled with electrochemiluminescence (ECL) and electrochemistry (EC) dual detection. The mixture of acetonitrile (ACN) and 2-propanol containing 1 M acetic acid (HAc), 20 mM sodium acetate (NaAc), and 2.5 mM tetrabutylammonium perchlorate (TBAP) was used as the electrophoretic buffer. Although a short capillary of 18 cm was used, the decoupler was not needed and the separation efficiency was good. The linear ranges of atropine, anisodamine, and scopolamine were 0.5–50, 5–2000, and 50–2000 μM, respectively. For six replicate measurements of 100 μM scopolamine, 15 μM atropine, and 200 μM anisodamine, the RSDs of ECL intensity, EC current, and migration time were less than 3.6%, 4.5%, and 0.3%, respectively. In addition, because the organic buffer was used, the working electrode (Pt) was not easily fouled and did not need reactivation. The method was also applied for the determination of these three alkaloids in Flos daturae extract.     

Permanent gold nanoparticle coatings on polyelectrolyte multilayer modified capillaries for open-tubular capillary electrochromatography

This paper reports on a new strategy to coat fused silica capillaries through ionic adsorption of gold nanoparticles (AuNPs) on a polyelectrolyte multilayer (PEM) modified capillary wall. The coating was constructed in situ by alternating rinses with positively charged poly(diallydimethylammonium chloride), negatively charged poly(sodium-4-styrenesulfonate), and positively charged AuNPs. After self-assembly of n-octadecanethiol onto the surface of AuNPs, the modified capillary was investigated as a new medium for the separation of neutral analytes and proteins in open-tubular capillary electrochromatography (OT-CEC). The surface coverage of the capillary wall was increased using the high density of AuNPs which were dynamically capped with 4-dimethylaminopyridine (DMAP). The chromatographic performance of the column coated with positively charged AuNPs was remarkably improved compared with a column modified with negatively charged AuNPs. The coating was robust over more than 810 runs in this study and also showed high stability against 0.01 M NaOH, 0.01 M HCl, and electrolyte concentrations up to 70 mM. The run-to-run, day-to-day, and capillary-to-capillary reproducibilities of electroosmotic flow were satisfying with relative standard deviation values of less than 1% in all cases. The AuNP-coated PEM modified capillary column not only showed good performance for neutral analytes but also was suitable for the analysis of both basic and acidic proteins.     

Dual‐column capillary microextraction (CME) combined with electrothermal vaporization inductively coupled plasma mass spectrometry (ETV‐ICP‐MS) for the speciation of arsenic in human hair extracts

In this work, dual‐column capillary microextraction (CME) system consisting of N‐(2‐aminoethyl)‐3‐aminopropyltrimethoxysilane (AAPTS)‐silica coated capillary (C1) and 3‐mercaptopropyl trimethoxysilane (MPTS)‐silica coated capillary (C2) was developed for sequential separation/preconcentration of arsenite [As(III)], arsenate [As(V)], monomethylarsonic acid [MMA(V)] and dimethylarsinic acid [DMA(V)] in the extracts of human hair followed by electrothermal vaporization inductively coupled plasma mass spectrometry (ETV‐ICP‐MS) detection with iridium as permanent modifier. Various experimental parameters affecting the dual‐column microextraction of different As species had been investigated in detail. It was found that at pH 9, As(V) and MMA could be quantitatively retained by C1 and only As(III) could be quantitatively retained by C2. With the aid of valve switching, As(V)/MMA(V) retained on C1 and As(III) retained on C2 could be sequentially desorbed by 10 µl of 0.01 mol l^?1 HNO₃ [for As(V)], 0.1 mol l^?1 HNO₃ [for MMA(V)] and 0.2 mol l^?1 HNO₃‐3% thiourea (m/v) [for As(III)], respectively, the eluents were immediately introduced into the Ir‐coated graphite tubes for further ETV‐ICP‐MS detection. With two‐step ETV pyrolysis program, Cl^? in the sample matrix could be in situ removed, and the total As in the human hair extracts or digested solution could be interference‐free, determined by ETV‐ICP‐MS. DMA(V) in the human hair extracts was obtained by subtraction of total As in the human hair extracts from other three As species. Under the optimized conditions, the detection limits (3 σ) of the method were 3.9 pg ml^?1 for As(III), 2.7 pg ml^?1 for As(V), 2.6 pg ml^?1 for MMA(V) and 124 pg ml^?1 for total As with the relative standard deviations less than 7.0% (C = 0.1 ng ml^?1, n = 7), and the enrichment factor was 286, 262 and 260 for As(III), As(V) and MMA(V), respectively. The developed method was successfully applied for the speciation of arsenic in the extracts of human hair. Copyright © 2009 John Wiley & Sons, Ltd.