Determination of thermodynamic functions of sorption for cyclohexyl-, piperidyl-, morpholyl-, and thiomorpholyl-n-alkanes by capillary gas-liquid chromatography

The values of partial molar free energy (G), enthalpy (H), and entropy (S) of sorption in the homologous series ofN-alkylpiperidines,N-alkylmorpholines,N-alkyl thiomorpholines, and alkylcyclohexanes were determined. It was found that the free energy of sorption is determined to a greater extent by the enthalpy term than by the entropy one. The free energy of sorption of the first homolog decreases when then-alkyl chain is attached directly to the carbon atom of the cycle and increases in the case ofN-alkylsubstituted heterocycles. The influence of the heteroatom nature on intermolecular interactions of homologs with the nonpolar stationary phase was quantitatively estimated on the basis of thermodynamic data.Dead time necessary for calculation of the retention factor was determined by the retention of methane injected into the column simultaneously with the sample.Translated from Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 2030–2032, August, 1996.     

End-functionalized polyethylene oxide coated silica particles for packed capillary column supercritical fluid chromatography

Summary Polyethylene oxide (PEO)-based polymers with hydroxy, methoxy, and aminopropoxy terminal groups were coated on diol functionalized and hexamethyldisilazane end-capped silica particles. Proton-donor and proton-acceptor test solutes, including carboxylic acids, hydroxy-containing compounds, arylamines, and alkylamines were used to evaluate the chromatographic performances of these polymer coated particles under SFC conditions with neat CO₂ as mobile phase. It was found that the particles coated with hydroxy-terminated PEO were suitable for the separation of proton-donor compounds such as hydroxy-containing compounds and carboxylic acids, and the particles coated with aminopropoxy-terminated PEO could be used for the separation of amines. That is, the proton-accepting stationary phase is suitable for the separation of proton accepting solutes, including strong basic alkylamines (pK_b4), using neat CO₂ as mobile phase, while the protondonating stationary phase is suitable for the separation of proton-donating compounds such as carboxylic acids (pK_a4). Hydrogen bond basicity was found to be a critical factor for the chromatography of basic amines. Low volatility acidic and basic drugs were chromatographed using the new stationary phases. The stability of the PEO coated particles was determined by measuring the loss of organic carbon under SFC conditions. It was found that approximately 18 % of the coating (average molecular weight of 15,000) was washed out of the particles by supercritical CO₂ after 7 h at 350 atm and 50°C     

Characterization of OV-1/FFAP-mixture coated glass capillary columns used for the separation of free fatty acids

As an alternative to acid pretreated UCON and FFAP capillaries for the analysis of wide-boiling free fatty acid mixtures, OV-1 : FFAP phase mixtures were used on high-temperature silylated inert glass capillary columns. The HETP-carrier gas velocity curves, peak asymmetry factors, coating efficiency, gas phase and stationary phase contributions to the mass transfer resistance were determined for various OV-1 : FFAP ratios. Mixed-phase capillaries showed optimum performance at a 2 : 1 OV-1 : FFAP ratio. The thermal and long-term stability of OV-1-stabilized FFAP columns surpassed those of the UCON and pure FFAP reference column used.     

Non-aqueous capillary zone electrophoresis method for the analysis of paroxetine, tamoxifen, and their main metabolites in urine

The potential of non-aqueous capillary electrophoresis (NACE) was investigated for the simultaneous separation of paroxetine, tamoxifen, and their main metabolites. Baseline separation of the studied solutes was obtained on a  μm capillary using a non-aqueous buffer composed of 18 mM ammonium acetate and 1.1% acetic acid in 80:20 (v/v) methanol-acetonitrile, with a temperature and voltage of 22 °C and 15 kV, respectively. Clomipramine was used as internal standard. Aspects such as stability of the solutions, linearity, accuracy, precision and ruggedness were examined in order to validate the proposed method. Detection limits obtained for all the studied compounds ranged between 3.0 and 7.1 μg l⁻¹. The developed method is sensitive and robust and was used to determine paroxetine, tamoxifen, and their metabolites at clinically relevant levels in human urine. Before NACE determination, the samples were purified and enriched by means of an extraction-pre-concentration step with a pre-conditioned C₁₈ cartridge. Determination of these analytes in the urine of four females urines was demonstrated.     

Simultaneous Determination of Various Classes of Pesticides Using Micellar Electrokinetic Capillary Chromatographyin Combination with Solid-Phase Extraction

The potential of micellar electrokinetic capillary chromatography (MEKC) with UV-detection for the simultaneous determination of various selected pesticides in water samples was investigated. The developed method using solid-phase extraction showed high efficiency and good resolution with detection limits in the 0.2 to 0.5 ppm range. Comparison of several SPE cartridges demonstrates their suitability for the extraction of pesticides with different hydrophobicity achieving 5000-fold enrichment. The described method involving SPE procedure and MEKC separation enables the successful determination of a wide spectrum of pesticides in water in the range of maximum residue limits (MRLs).     

Chromatographic evaluation of perphenylcarbamoylated β-cyclodextrin bonded stationary phase for micro-high performance liquid chromatography and pressurized capillary electrochromatography

Application of mono (6^A-N-ethylenediamine-6^A-deoxy) perphenylcarbamoylated β-cyclodextrin (β-CD) bonded stationary phase (CSP) in micro-high performance liquid chromatography (micro-HPLC) and pressurized capillary electrochromatography (p-CEC) was firstly presented. A series of racemic α-amidophosphonates were resolved in reversed- and normal-phase modes on this CSP. The investigated chromatographic parameters include retention factor (k′), separation factor (α) and resolution (Rs) of solutes. In addition, the structural variation of the solutes and the experimental factors affecting chiral separations have been examined, including the percentage of alcohol modifier, the linear velocity (u) of the mobile phase, electrical field strength, etc. Baseline separation was achieved for most of the entities. Hydrophobic interaction, steric effect and π-π interaction contribute to the possible mechanism. Comparative results indicate that higher Rs value up to 3.1 was found in micro-HPLC, higher efficiency up to 29,970 in p-CEC.     

The effect of interface deformation due to gravity on line tension measurement by the capillary rise in a conical tube

Much research has been done on line tension measurement and interpretation, and attempts have also been made to measure line tension with simple, cheap and reliable methods that do not require excessive sophistication. Of particular interest is the method of determining line tensions of solid–liquid–vapor systems from the capillary rise in a conical tube. This simple and relatively inexpensive method gives line tension values comparable to those reported in the literature obtained via highly sophisticated instruments or techniques such as the well known axisymmetric drop shape analysis technique. The absolute value of line tension obtained using the conical tube method and assuming a spherical liquid–vapor interface is larger but of the same order of magnitude (1 μJ m⁻¹) as that reported in the literature. A theoretical analysis presented herein shows that by including the deformation of the liquid–vapor interface due to gravity in the conical capillary analysis, the line tension value inferred from the experimental data is reduced by approximately 50% and compares better with values in the literature obtained using other sophisticated methods. Thus a relatively simple, cheap, accurate and reliable method of line tension measurement has been advanced.     

One-Step Synthesis of Monolithic Silica Nanocomposites in Fused Silica Capillaries

The ideal way to prepare efficient, yet robust stationary phases for microanalytical high-resolution methods such as capillary chromatography and electrochromatography remains to be defined. In this contribution a one step sol-gel process is proposed for the production of monolithic, macroporous nanocomposite phases in fused silica capillaries, which require no additional derivatization, since they already bear the interactive (C8) moieties. The effect of the catalyst, the water content, the pH, as well as that of certain additives on monolith formation and porosity is investigated. Volume shrinkage and a tendency to crack were the major obstacles to overcome. Homogeneous stationary phases could be produced by applying a pH gradient during sol formation, thereby changing the catalytic principle from acidic (0.1 M HCl) to basic (gradual formation of OH^– as a consequence of the hydrolysis of N-methylformamide). Gelation/coacervation of suchgels could be induced by the addition of N,N-diethylamine. The water content during sol formation was determined as decisive for pore formation, with 250% of the amount theoretically needed for complete hydrolysis of all precursors giving optimal results. The volume shrinkage problem during xerogel formation was resolved by integrating dialkyldialkoxysilane units (dimethyldiethoxysilane 35 mol%) into the silica network.     

Speciation analysis of inorganic arsenic by microchip capillary electrophoresis coupled with hydride generation atomic fluorescence spectrometry

A novel method for speciation analysis of inorganic arsenic was developed by on-line hyphenating microchip capillary electrophoresis (chip-CE) with hydride generation atomic fluorescence spectrometry (HG-AFS). Baseline separation of As(III) and As(V) was achieved within 54 s by the chip-CE in a 90 mm long channel at 2500 V using a mixture of 25 mmol l(-1) H3BO3 and 0.4 mmol l(-1) CTAB (pH 8.9) as electrolyte buffer. The precisions (RSD, n=5) ranged from 1.9 to 1.4% for migration time, 2.1 to 2.7% for peak area, and 1.8 to 2.3% for peak height for the two arsenic species at 3.0 mg l(-1) (as As) level. The detection limits (3sigma) for As(III) and As(V) based on peak height measurement were 76 and 112 microg l(-1) (as As), respectively. The recoveries of the spikes (1 mg l(-1) (as As) of As(III) and As(V)) in four locally collected water samples ranged from 93.7 to 106%.     

一种非晶硅膜改性弹性玻璃毛细管交联中等极性固定相色谱柱的制备

研究了非晶硅膜改性的弹性玻璃毛细管交联ＯＶ－１７０１中等极性固定相色谱柱。在适当温度下，采用过氧化二异丙苯（ＤＣＵＰ）游离基引发交联ＯＶ－１７０１固定液，成功地制备了交联ＯＶ－１７０１柱，该柱具有柱效高、惰性好、耐溶剂、抗腐蚀和耐高温等性能，是一种新型高性能的中等极性交联柱。