Flow‐Injection Online Reduction Atomic Fluorescence Spectrometry Determination of Se(IV) and Se(VI) with Electrochemical Hydride Generation

Abstract

A new flow‐injection online reduction electrochemical hydride generation system for the determination of Se(IV) and Se(VI) by atomic fluorescence spectrometry (AFS) was developed. In the system, an electromagnetic induction oven was used as heating resource to reduce Se(VI) to Se(IV) and a homemade tubular electrolytic cell as hydride generator. All analytical procedures were automatically controlled by a computer. The conditions of online reduction, including temperature, HCl concentration, and reduction time, have been studied in detail. The detection limits (3σ) of Se(IV) and Se(VI) in aqueous solution were 0.26 µg L^?1 and 0.23 µg L^?1, respectively. The precision for 11 replicate measurements of 50 µg L^?1 Se(IV) and Se(VI) was 2.2% and 2.5%. This proposed method has been applied to the determination of Se(IV) and Se(VI) in springwater samples.     

Flow Injection Kinetic Spectrophotometric Determination of Cerium Based on the Decolorization Reaction Between Arsenazo III and Cerium (IV)

ABSTRACT

Trace amounts of cerium were analyzed by flow injection kinetic spectrophotometry, based on the decolorization reaction between arsenazo III and Ce(IV) in sulfuric acid medium at room temperature. The absorbance difference (ΔA) of decolorization was linear with the concentration of Ce(IV). The flow injection technique was used to precisely control the timing. Under the optimum conditions, the determination of Ce(IV) in the range 0.0–8.0 µg mL^?1 with a correlation coefficient (r) of 0.9982, the regression equation was ΔA = 0.0014 + 0.0406c (µg mL^?1). The detection limit (3σ) of 0.2 µg mL^?1 was achieved at a sampling frequency of 60 h^?1. The proposed method was applied to the analyses of Ce in soil successfully.     

Numerical study of the heat transfer and electro-thermo-convective flow patterns in dielectric liquid layer subjected to unipolar injection

In this article we study the electro-thermal convection in a dielectric liquid layer placed between two electrodes and subjected to the simultaneous action of an electric field and a thermal gradient. The full set of equations describing the electro-thermo-convective phenomena is directly solved using a finite volume method. We first heat the liquid from below at time t = 0, wait for the thermal steady state and then inject the electric charges by applying the electric potential. The development of the electro-convective motion is analysed in detail in two cases: 1) strong injection from the lower electrode, 2) strong injection from the upper one. We also study the heat transfer enhancement due to electro-convection. The evolution in time of the Nusselt number Nu for different combinations of the two usual non-dimensional parameters associated to the electro-thermo-convection phenomena (Rayleigh number Ra and the electrical parameter T) is also given and analysed.     

A numerical study on extinction behaviour of laminar micro-diffusion flames

We conducted a numerical study on the fluid dynamic, thermal and chemical structures of laminar methane–air micro flames established under quiescent atmospheric conditions. The micro flame is defined as a flame on the order of one millimetre or less established at the exit of a vertically-aligned straight tube. The numerical model consists of convective–diffusive heat and mass transport with a one-step, irreversible, exothermic reaction with selected kinetics constants validated for near-extinction analyses. Calculations conducted under the burner rim temperature 300 K and the adiabatic burner wall showed that there is the minimum burner diameter for the micro flame to exist. The Damköhler number (the ratio of the diffusive transport time to the chemical time) was used to explain why a flame with a height of less than a few hundred microns is not able to exist under the adiabatic burner wall condition. We also conducted scaling analysis to explain the difference in extinction characteristics caused by different burner wall conditions. This study also discussed the difference in governing mechanisms between micro flames and microgravity flames, both of which exhibit similar spherical flame shape.     

Recent Developments in Flow Injection/Sequential Injection Liquid-Liquid Extraction for Atomic Spectrometric Determination of Metals and Metalloids

Abstract

This review aims to provide a critical overview of automated flow injection and sequential injection liquid-liquid extraction for preconcentration and/or separation of ultra-trace metal and metalloid species hyphenated with atomic spectrometric detection systems, including some new trends and applications in the subbranches of cloud point extraction (CPE), wetting film extraction (WFE), supported liquid membrane extraction (SLME), extraction chromatography (EChr), and liquid-phase microextraction (LPME) techniques. The analytical performance of flow-injection/sequential injection liquid-liquid extraction methods is markedly affected by the components of the flow network such as segmentor, extraction coil, and phase separator. Thus, an overall presentation of system components along with some novel strategies for interface with atomic spectrometers is discussed and exemplified with selected applications.     

Sequential estimation of a parameter of an exponential distribution

We consider the problem of minimum risk point estimation for the parameter =a+b of the exponential distribution with unknown location parameter and scale parameter when the loss function is squared error plus linear cost. In this paper, we propose a sequential estimator of and show that the associated risk is asymptotically one cost less than that given by Ghosh and Mukhopadhyay (1989,South African Statist. J.,23, 251–268).     

Bayesian sequential reliability for Weibull and related distributions

Assume that the probability density function for the lifetime of a newly designed product has the form: [H(t)/Q()] exp{–H(t)/Q()}. The Exponential(), Rayleigh, WeibullW(, ) and Pareto pdf's are special cases.Q() will be assumed to have an inverse Gamma prior. Assume thatm independent products are to be tested with replacement. A Bayesian Sequential Reliability Demonstration Testing plan is used to eigher accept the product and start formal production, or reject the product for reengineering. The test criterion is the intersection of two goals, a minimal goal to begin production and a mature product goal. The exact values of various risks and the distribution of total number of failures are evaluated. Based on a result about a Poisson process, the expected stopping time for the exponential failure time is also found. Included in these risks and expected stopping times are frequentist versions, thereof, so that the results also provide frequentist answers for a class of interesting stopping rules.This research was supported by NSF grants DMS-8703620 and DMS-8923071, and forms part of the Ph.D. Thesis of the first author, the development of which was supported in part by a David Ross grant at Purdue University. The authors thank the editors and a referee for insightful comments and suggestions.     

基于B3PyMPM∶Cs高效叠层OLED器件的制备

以B 3 PyMPM∶Cs/Al/HAT-CN作为电荷生成单元制备高效叠层绿色磷光有机电致发光器件,叠层器件的最大电流效率和最大流明效率分别为172.2 cd/A和111.0 lm/W,在5 mA/cm^2电流密度下,叠层器件的电压和亮度分别为传统器件的2.04倍和2.84倍.为了探究叠层器件性能优于传统器件的原因,研究了电荷生成单元内的电荷产生和注入过程,以及薄层铝对电子注入特性和电荷生成单元稳定性的影响.实验结果表明,电荷能够有效地在电荷生成单元内产生并顺利注入电子传输层中,B3PyMPM∶Cs和HAT-CN间Al薄层的插入能够进一步提高电子注入效率及器件结构的稳定性.     

Universality two-dimensional Kauffman model for parallel and sequential updating

Kauffman's random Boolean nets are studied on the square lattice by computer simulation comparing parallel and sequential updating of the automata. At the phase transition the fractal dimensions of time and actual damage are found to be independent of the updating method.     

有机薄膜电致发光器件载流子注入和传输性质的研究

制备了不同电极、不同厚度、以8-羟基喹啉铝螯合物(Alq3)为发光层的有机薄膜电致发光(TFEL)器件。分析了它们的电流密度-电压关系。不同阳极器件的电流变化很大,而改变阴极时电流密度的变化较小,说明电流以空穴为主。根据不同阴极器件的电致发光效率的比较,说明电子是决定器件电致发光效率的少数载流子。从不同厚度的器件的结果讨论了载流子的传输性质,认为在ITO/Alq3/Al器件中的电流符合陷阱限制的空间电荷电流.