改善液晶光阀投影光学系统偏振特性的理论设计方法

定量分析了液晶光阀投影光学系统中影响系统对比度的主要因素，利用矢量方法建立三维空间数学模型对光线进行追迹，并利用琼斯矩阵和矢量光学的原理分析了偏振器件--主要是波片--和各种光学薄膜对光学系统性能的影响。给出了在一定假设条件下的对没有波片的光学系统和插入波征后的光学系统的仿真计算结果。两组数据比较表明在光路中插入合适相位差的波片可以显著提高系统对比度等性能。     

低进汽压力下超音速两相流升压特性实验研究

本文采用实验方法研究了进汽压力为0.2 MPa以下时,由蒸汽喷嘴、混合腔及相应的阀门和管道组成超音速汽液两相流升压加热装置的运行特性。实验表明在进汽压力为0.1 MPa-0.2 MPa时,超音速汽液两相流升压加热装置都可稳定可靠地运行,且升压效果明显,可满足电力、供暖、轻工等许多行业蒸汽加热的要求。     

流动注射-ICP光谱分析中的基体效应和酸效应研究

本文讨论了流动注射-ICP光谱分析中的基体效应和酸效应。当基体(Na、Ca、Fe、Zn)的浓度大于5mg/ml时,待测元素的谱线强度表现出不同程度的降低;上述基体的引入对激发温度和电子密度的影响不明显;基体产生的抑制效应可能与改变了待测元素粒子的激发几率的因素有关;于载流体中加入一定量的基体元素,是消除或降低基体效应的有效方法。酸(HCl、HNO_3、H_2SO_4)对待测元素表现出不同程度的抑制效应,其主要原因是物理干扰所致。     

Modeling of RF plasma torch with a metallic tube inserted for reactant injection

Flow, temperature, and electromagnetic (EM) fields in a radio-frequency thermal plasma torch designed for the preparation of superconducting powders or films have been analysed by using a new two-dimensional modeling approach with the electric field intensity as the fundamental EM field variable. The insertion of a stainless steel injection tube into the torch leads to large induction currents in this tube. Although such large induction currents cause pronounced changes of the EM fields near the injection tube, flow and temperature fields are little affected. There exists only one large toroidal vortex in the upper part of the present torch, while the maximum temperature appears at an off-axis location within the coil region.     

Nonlinear modelling and control of a common rail injection system for diesel engines

Modern trends in designing mechatronic systems call for a synergic design of the separated subsystems (mechanic, electronic parts, control modules, etc.) concurring to the overall performance. Following this point of view, this paper presents a control oriented model and a nonlinear control design for a Common Rail injection system. First a model is developed, which is tuned in a virtual simulation environment, representing the injection system in details in a reliable replication of reality. Then a sliding mode control is developed. Both the model of the injection process and of the control law are validated by a virtual detailed simulation environment. The prediction capability of the model and the control efficiency are clearly shown.     

电控发动机喷油脉宽的分析

本文介绍了利用喷油脉宽大小的变化来分析电控发动机电控系统、燃油供给等系统故障的一种方法,在汽车故障检测与诊断中有着广泛的应用。     

Sequential nonlinear estimation with nonaugmented priors

How can the basic compatibility of theory and observations be investigated for nonlinear processes without requiring stochastic characterizations for residual error terms? The present paper proposes a flexible least-cost approach. For each possible estimatex for the sequence of process states, letc _D (x) andx _M(x) denote the costs incurred for deviations away from the prior dynamic specifications and prior measurement specifications, respectively. Define the cost-efficiency frontier to be the greatest lower bound for the set of all possible cost pairs [c _D (x),c _M(x)], conditional on the given observations. State sequence estimatesx that attain the cost-efficiency frontier indicate the possible ways that the actual process could have developed over time in a manner minimally incompatible with the prior dynamic and measurement specifications. An algorithm is developed for the exact sequential updating of the cost-efficient state sequence estimates as the duration of the process increases and additional observations are obtained.     

A theorem on sequentiality and compactness, with its fuzzy extension

An amended proof of a theorem of Franklin's on sequentiality and sequential compactness is presented, and a corresponding fuzzy version formulated using the theory of quasi-coincidence.