Nuclear-Electron Overhauser Effect in MC800 Liquid Asphalt Solutions

Experimental results on the extrapolated ultimate enhancement factors of o-, m-, and p-xylene protons at 1.53 mT are obtained for MC800 asphalt solutions. The ultimate enhancement factors are found such as ?26.9, ?25.7, and ?11.7 for o-, m-, and p-xylene, respectively. These results show that the solvent proton Overhauser effect cannot reach the extrapolated enhancement of ?330 in the extreme narrowing case because of occurrence of small scalar interactions in addition to the dipole–dipole interactions between solvent protons and asphalt electrons. The ortho, meta, and para positions of the –CH₃ group change the nature of the interactions. The nuclear magnetic resonance (NMR) signal enhancements exhibit a sensitive behavior depending on the chemical environment differing from isomer to isomer. The solvation or association of asphalt in xylene isomers at room temperature is revealed. Quantum chemical calculations for the xylene isomers with the electronic and optical properties; absorption wavelengths, excitation energy, atomic charges, dipole moment and frontier molecular orbital energies, molecular electrostatic potential; are carried out using the density functional theory (DFT) method (B3LYP) with the 6-311G(d,p) basis set by the standard Gaussian 09 software package program. The relative importance of scalar and translational dipolar interaction parameters determined in dynamic nuclear polarization experiments is explained by the electronic structure of HOMO–LUMO of the xylene isomers.     

Refractometer based on a tapered Mach–Zehnder interferometer with Peanut-Shape structure

A novel refractometer based on tapered Mach–Zehnder modal interferometer (MZI) is proposed and experimentally demonstrated. This sensor is composed of a pair of Peanut-Shape structures and an embedded taper – the former excites high-order cladding modes, while the latter enhances the evanescent field. As the effective refractive index (RI) of cladding is based on the changes of surrounding RI, thus extinction ratio will change due to the alteration of the distribution of power in the fiber which is induced by various differences of core and cladding for RI. As a result, the maximum RI sensitivity of 240.78 extinction ratio/RIU (refractive index unit) is achieved within the range from 1.3334 to 1.4081.     

Graphite–boron composite heater in a Kawai-type apparatus: the inhibitory effect of boron oxide and countermeasures

We have investigated the performance of a graphite–boron composite (GBC) with 3?wt % boron as a precursor for a boron-doped diamond heater in a Kawai-type apparatus at 15?GPa. We first tested a machinable cylinder of GBC sintered at 1000°C in Ar/H₂ gas (99:1 molar ratio). Boron oxide (B₂O₃) formed during sintering frequently hindered the GBC heater from stable operation at temperatures higher than 1400°C by producing melt throughout the heater together with oxide and/or silicates. We then rinsed the GBC heater in hydrochloric acid to remove B₂O₃. After rinsing, we succeeded in stably generating temperatures higher than 2000°C. We also improved a molding process of different-sized GBC tubes for convenient use and tested the molded GBC heater. It was free from the B₂O₃ problem. The electromotive force of the W/Re thermocouple was successfully monitored up to 2400°C.     

Micellar core-shell-type acrylic-polyurethane hybrid materials with self-polishing property

Abstract

Marine fouling can be a serious problem in the shipping industry, since it increases the surface roughness of the hull and hence its frictional resistance to its movement through water. Antifouling paint can be defined as preventing the attachment of marine organisms onto surfaces. However, the most commonly used antifouling coating which is the tributyltin-based self-polishing copolymer causes the severe pollution of marine environment. Ammonium salt-based paints include tertiary amines as biocides which have effective biocidal and biodegradable properties without accumulation in the sea environment. However, ammonium salt-based coatings were too sensitive to seawater and became swollen. In this study, polyurethane-acrylic copolymers were synthesized by radical polymerization. These hybrid materials were found to form core–shell structures in aqueous media. Synthesis and properties of copolymers were investigated by Fourier transform-infrared spectrometer, proton-nuclear magnetic resonance, transmission electron microscopy, and dynamic light scattering. The polishing rate of self-polishing copolymer was determined from the reduction in dry film thickness after artificial seawater immersion under a dynamic condition.     

Shadow-casted ultrathin surface coatings of titanium and titanium/silicon oxide sol particles via ultrasound-assisted deposition

Ultrasound-assisted deposition (USAD) of sol nanoparticles enables the formation of uniform and inherently stable thin films. However, the technique still suffers in coating hard substrates and the use of fast-reacting sol–gel precursors still remains challenging. Here, we report on the deposition of ultrathin titanium and titanium/silicon hybrid oxide coatings using hydroxylated silicon wafers as a model hard substrate. We use acetic acid as the catalyst which also suppresses the reactivity of titanium tetraisopropoxide while increasing the reactivity of tetraethyl orthosilicate through chemical modifications. Taking the advantage of this peculiar behavior, we successfully prepared titanium and titanium/silicon hybrid oxide coatings by USAD. Varying the amount of acetic acid in the reaction media, we managed to modulate thickness and surface roughness of the coatings in nanoscale. Field-emission scanning electron microscopy and atomic force microscopy studies showed the formation of conformal coatings having nanoroughness. Quantitative chemical state maps obtained by x-ray photoelectron spectroscopy (XPS) suggested the formation of ultrathin (<10 nm) coatings and thickness measurements by rotating analyzer ellipsometry supported this observation. For the first time, XPS chemical maps revealed the transport effect of ultrasonic waves since coatings were directly cast on rectangular substrates as circular shadows of the horn with clear thickness gradient from the center to the edges. In addition to the progress made in coating hard substrates, employing fast-reacting precursors and achieving hybrid coatings; this report provides the first visual evidence on previously suggested “acceleration and smashing” mechanism as the main driving force of USAD.     

Synthesis and application of molecularly imprinted nanoparticles combined ultrasonic assisted for highly selective solid phase extraction trace amount of celecoxib from human plasma samples using design expert (DXB) software

In this work molecular imprinted nanoparticles (MINPs) was synthesized and applied for ultrasonic assisted solid phase extraction of celecoxib (CEL) from human plasma sample following its combination by HPLC–UV. The MINPs were prepared in a non-covalent approach using methacrylic acid as monomer, CEL as template, ethylene glycol dimethacrylate as cross-linker, and 2,2-azobisisobutyronitrile (AIBN) as the initiator of polymerization. pH, volume of rinsing and eluent solvent and amount of sorbent influence on response were investigated using factorial experimental design, while optimum point was achieved and set as 250 mg sorbent, pH 7.0, 1.5 mL washing solvent and 2 mL eluent by analysis of results according to design expert (DX) software. At above specified conditions, CEL in human plasma with complicated matrices with acceptable high recoveries (96%) and RSD% lower than 10% was quantified and estimated.The proposed MISPE-HPLC–UV method has linear responses among peak area and concentrations of CEL in the range of 0.2–2000 μg L⁻¹, with regression coefficient of 0.98. The limit of detection (LOD) and quantification (LOQ) based on three and ten times of the noise of HPLC peaks correspond to blank solution were 0.08 and 0.18 μg L⁻¹, respectively.     

A combined approach of Kullback–Leibler divergence and background subtraction for moving object detection in thermal video

In this work, a robust method for moving object detection in thermal video frames has been proposed by including Kullback–Leibler divergence (KLD) based threshold and background subtraction (BGS) technique. A trimmed-mean based background model has been developed that is capable enough to reduce noise or dynamic component of the background. This work assumed that each pixel has normally distributed. The KLD has computed between background pixel and a current pixel with the help of Gaussian mixture model. The proposed threshold is useful enough to classify the state of each pixel. The post-processing step uses morphological tool for edge linking, and then the flood-fill algorithm has applied for hole-filling, and finally the silhouette of targeted object has generated. The proposed methods run faster and have validated over various real-time based problematic thermal video sequences. In the experimental results, the average value of F₁-score, area under the curve, the percentage of correct classification, Matthew’s correlation coefficient show higher values whereas total error and percentage of the wrong classification show minimum values. Moreover, the proposed-1 method achieved higher accuracy and execution speed with minimum false alarm rate that has been compared with proposed-2 as well as considered peer methods in the real-time thermal video.     

Spin polarization induced by an electric field in the presence of weak localization effects

We evaluate the spin polarization (Edelstein or inverse spin galvanic effect) and the spin Hall current induced by an applied electric field by including the weak localization corrections for a two-dimensional electron gas. We show that the weak localization effects yield logarithmic corrections to both the spin polarization conductivity relating the spin polarization and the electric field and to the spin Hall angle relating the spin and charge currents. The renormalization of both the spin polarization conductivity and the spin Hall angle combine to produce a zero correction to the total spin Hall conductivity as required by an exact identity. Suggestions for the experimental observation of the effect are given.     

The Ablowitz–Ladik hierarchy integrability analysis revisited: the vertex operator solution representation structure

A regular gradient-holonomic approach to studying the Lax type integrability of the Ablowitz–Ladik hierarchy of nonlinear Lax type integrable discrete dynamical systems in the vertex operator representation is presented. The relationship to the Lie-algebraic integrability scheme is analyzed and the connection with the τ-function representation is discussed.     

Growth characteristics of spherical titanium oxide nanoparticles during the rapid gaseous detonation reaction

The nanosize grain growth characteristics of spherical single-crystal titanium oxide (TiO₂) during the rapid gaseous detonation reaction are discussed. Based on the experimental conditions and the Chapman–Jouguet theory, the Kruis model was introduced to simulate the growth characteristics of spherical TiO₂ nanoparticles obtained under high pressure, high temperature and by rapid reaction. The results show that the numerical analysis can satisfactorily predict the growth characteristics of spherical TiO₂ nanoparticles with diameters of 15–300 nm at different affecting factors, such as concentration of particles, reaction temperature and time, which are in agreement with the obtained experimental results. We found that the increase of the gas-phase reaction temperature, time, and particle concentration affects the growth tendency of spherical nanocrystal TiO₂, which provides effective theoretical support for the controllable synthesis of multi-scale nanoparticles.