High performance polyethersulfone UF membrane for manufacturing spiral wound module: preparation,morphology, performance,and chemical cleaning

Large sheet asymmetric polyethersulfone (PES) ultrafiltration membranes were prepared via phase inversion process in a continuous conveyor system with addition of PVP to the casting solution. Dimethylacetamide (DMAc) and mixture of water and isopropyl alcohol (70/30 v%) were used as solvent and non‐solvent respectively. The prepared membrane was 0.96 m wide and 3 m long. The pieces of the membrane were selected randomly for characterization in terms of performance using cross flow filtration for milk concentration, image analysis, scanning electron microscopy (SEM), and cleaning procedures. It was found that the prepared membrane has high porosity and high water flux during milk filtration. In addition, cleaning experiments indicated that NaOH/HCl/NaOH sequence is an effective procedure for cleaning the fouled membrane during milk concentration. Copyright © 2007 John Wiley & Sons, Ltd.     

Development of a method to screen and isolate xanthine oxidase inhibitors from black bean in a single step: Hyphenation of semipreparative liquid chromatography and stepwise flow rate countercurrent chromatography

Black bean, in which isoflavones are the main active constituent, also contains saponins and monoterpenes. Soybean isoflavone is a secondary metabolite that is formed during the growth of soybean; it exhibits antioxidant and cardiovascular activities and traces estrogen-like effects. In this study, black bean isoflavones were extracted with n-butanol, and ultrafiltration–liquid chromatography–mass spectrometry was used to screen their activity. Subsequently, the inhibitors were isolated and purified using semipreparative liquid chromatography and stepwise flow rate countercurrent chromatography. Thereafter, five active compounds were identified using mass spectrometry and nuclear magnetic resonance experiments. Finally, the inhibition types of the xanthine oxidase inhibitors were determined using enzymatic kinetic studies. The IC₅₀ values of daidzin, glycitein-7-O-glucoside, genistin, daidzein, and genistein were determined to be 35.08, 56.22, 30.76, 68.79, and 95.37 μg/mL, respectively. Daidzin, genistin, and daidzein exhibited reversible inhibition, whereas glycitein-7-O-glucoside and genistein presented irreversible inhibition. This novel approach, which was based on ultrafiltration–liquid chromatography–mass spectrometry and stepwise flow rate countercurrent chromatography, is a powerful method for screening and isolating xanthine oxidase inhibitors from complex matrices. The study of enzyme inhibition types is helpful for understanding the underlying inhibition mechanism. Therefore, a beneficial platform was developed for the large-scale production of bioactive and nutraceutical ingredients.     

Unraveling the mystery of efficacy in Chinese medicine formula: New approaches and technologies for research on pharmacodynamic substances

Traditional Chinese medicine (TCM) is the key to unlock treasures of Chinese civilization. TCM and its compound play a beneficial role in medical activities to cure diseases, especially in major public health events such as novel coronavirus epidemics across the globe. The chemical composition in Chinese medicine formula is complex and diverse, but their effective substances resemble “mystery boxes”. Revealing their active ingredients and their mechanisms of action has become focal point and difficulty of research for herbalists. Although the existing research methods are numerous and constantly updated iteratively, there is remain a lack of prospective reviews. Hence, this paper provides a comprehensive account of existing new approaches and technologies based on previous studies with an in vitro to in vivo perspective. In addition, the bottlenecks of studies on Chinese medicine formula effective substances are also revealed. Especially, we look ahead to new perspectives, technologies and applications for its future development. This work reviews based on new perspectives to open horizons for the future research. Consequently, herbal compounding pharmaceutical substances study should carry on the essence of TCM while pursuing innovations in the field.     

氨基酸修饰聚芳醚酮超滤膜的抗污染性能

膜分离技术广泛应用于水处理、医药、食品、化工等领域。但在膜使用过程中,膜容易被蛋白质和细菌所污染,降低了膜的分离性能和使用寿命,提高了膜技术的应用成本,极大的限制了膜的应用。本文以含羧基的酚酞聚芳醚酮(PEK-COOH)制备超滤膜,利用1-乙基-(3-二甲基氨基丙基)碳酰二亚胺/N-羟基琥珀酰亚胺(EDC/NHS)方法将碱性氨基酸赖氨酸(Lys)、精氨酸(Arg)、组氨酸(His)接枝至超滤膜表面。实验结果表明,接枝氨基酸后水通量增加,静态蛋白吸附量降低,同时接枝组氨酸的超滤膜过滤牛血清白蛋白(BSA)3个循环后水通量恢复率达80%,表现出良好的抗污染性能。     

Direct Synthesis of Ceramic Membranes by Sol-Gel Process

Ceramic ultrafiltration and nanofiltration membranes (TiO₂) are prepared by sol-gel route using a special arrangement which allows the reaction of the reactants directly in the pores of a tubular Al₂O₃ support or on its surface, respectively. By this direct synthesis the number of technological steps can be reduced which is the main advantage of the method. The produced layers are well joined with the Al₂O₃ support and the reaction can be adjusted by various technological parameters. The dried and sintered coatings are characterized by X-Ray diffraction, FESEM and AFM. In addition, pore size distribution and filtration properties are investigated and discussed.     

Determination of Trace Elements in Tea and Coffee by Neutron Activation Analysis

Thermal neutron activation analysis, a high-resolution Ge(Li) gamma-ray spectrometer, and an IBM 360/67 digital computer were used to determine the concentration of Na, K, Sc, Cr, Mn, Fe, Co, Cu, Zn, Se, Br, Rb, Sb, Cs, and Hg in ground coffee and tea. This nondestructive multielement technique requires neither pre- nor postirradiation chemistry and eliminates problems of reagent contamination. The method is simple, precise and sensitive to 15 elements. Interferences from fast neutron (n, p) and (n, α) reactions are small and, if necessary, corrections may be applied easily. This technique can be applied to percolated tea and coffee.     

Micellar Enhanced Ultrafiltration of Reactive Black 5 from Aqueous Solution by Cationic Surfactants

Reactive black 5 (RB-5) dye was removed from a water stream using two cationic surfactants, cetyltrimethylammonium bromide (CTAB) and cetylpyridinium chloride (CPC), via micellar enhanced ultrafiltration. Three membranes with different pore size were used for the determination of rejection coefficient and permeate flux of the solution at 1.5 bar trans-membrane pressure (TMP). The two surfactants (CPC and CTAB) played an almost negligible role in rejection efficiency with 5000 and 10,000 molecular weight cut-off membrane (MWCO), respectively. In this case, high rejection and low permeate flux was the result of a larger molecular size of RB-5 DYE being retained by comparatively smaller sized pores of membrane via ultrafiltration. However, CPC and CTAB surfactants showed 83% and 98% rejection coefficient, respectively, at a concentration greater than their CMC values against 30,000 MWCO. Permeate flux remained low and constant in presence of 5000 and 10,000 MWCO with a small variation against 30,000 MWCO for the two surfactants, thereby no appreciable effect on both surfactant concentrations on concentration polarization was estimated. Thus, RB-5 dye alone was determined to be responsible for membrane plugging or concentration polarization and ultimately for low permeate flux. The effect of trans-membrane pressure was also investigated during this study.     

On-line sorption preconcentration of metals based on mixed micelle cloud point extraction prior to their determination with micellar chemiluminescence: Application to the determination of chromium at ng l levels

The on-line incorporation of cloud point extraction (CPE) to flow injection analysis (FIA) is modified to extract and preconcentrate metal species rapidly, avoiding the formation of hydrophobic complexes, using a mixed micellar medium. Coupling the procedure with chemiluminescence (CL) detection based on the catalytic activity of metal species on the luminol-hydrogen peroxide reaction and enhancing the signal with the presence of a micellar carrier containing bromide ions produces a powerful tool for the preconcentration and determination of metal species at ng l⁻¹ levels. As an analytical demonstration ultratrace concentrations of chromium were conveniently detected and quantified in samples with a complex matrix such as seawater and wastewater. The figures of merit for the determination of chromium were: 0.9-1.6% R.S.D. (n=5) with detection and quantification limits 0.5 and 2.0 ng l⁻¹, respectively. The calibration graph was rectilinear from 2 to 200 ng l⁻¹ (r=0.9996, n=6). Several other metal ions were determined in ideal situations, with analogous results.     

High resolution protein separations using affinity ultrafiltration with small charged ligands

Although the feasibility of affinity ultrafiltration was demonstrated more than 20 years ago, commercial applications have not developed due to the high cost and practical limitations of the large macroligands needed for highly selective separations. The objective of this study was to examine the use of small charged affinity ligands for protein purification by exploiting electrostatic interactions between the charged complex and an electrically-charged membrane. Experiments were performed using bovine serum albumin and ovalbumin with Cibacron Blue as the affinity ligand. Negatively charged versions of a composite regenerated cellulose membrane were generated by covalent attachment of a sulfonic acid functionality. Binding experiments were used to identify appropriate conditions for protein separations. The selectivity for the separation of BSA and ovalbumin was a function of the solution conditions, Cibacron Blue concentration, and membrane charge, with the addition of Cibacron Blue causing a 30-fold increase in selectivity. A diafiltration process was performed at the optimal conditions, giving a BSA product with a purification factor of more than 90-fold and a yield greater than 90%. These results clearly demonstrate the potential of using a small charged affinity ligand for high resolution protein separations.     

Fractionation of casein hydrolysates using polysulfone ultrafiltration hollow fiber membranes

The objective of this study was to characterize the fractionation profile of casein hydrolysates obtained with polysulfone hollow fiber ultrafiltration membranes. The two-step ultrafiltration process developed by Turgeon and Gauthier [J. Food Sci., 55 (1990) 106] was used: a caseinate solution was submitted to proteolysis with chymotrypsin or trypsin, and the reaction mixture (RM) was subsequently ultrafiltered using a 30 kDa (MWCO) hollow-fiber polysulfone membrane. The total hydrolysate permeating from this first step was further fractionated using a 1 kDa (MWCO) membrane, producing the mixture of polypeptides (retentate) and the amino acid fraction (permeate). The effect of enzyme specificity and of membrane retentivitiy on the total composition (total nitrogen, fat, lactose, minerals) and amino acid profile of the fractions was studied. The overall composition of the fractions was not significantly affected by the nature of the enzyme but the degree of hydrolysis and the molecular weight distribution profile analyses showed a marked effect of the enzyme specificity, with trypsin giving a larger proportion of small peptides (< 200 Da) in the mixture of polypeptides. Amino acid profile analyses provided useful information on the phenomena governing the fractionation of amino acids with a polysulfone membrane: (1) the target amino acids of the enzyme are concentrated in the permeate as a result of their presence in all peptides produced by hydrolysis, (2) polar amino acids are retained by the membrane, (3) non-polar amino acids are not selectively rejected by the membrane. Our results suggest that the charge/hydrophobicity balance of the peptides produced is the predominant factor determining the fractionation of casein hydrolysates.