CTAB对H2O2氧化抗坏血酸反应动力学的影响

H₂O₂氧化抗坏血酸H₂A的反应为一复杂过程,其过程可用下面可逆连续反应来描述:HA－＋H₂O₂ A,本文用热导式热量计研究了该复杂反应在25 ℃和pH=7的磷酸缓冲溶液(离子强度μ=0.1 mol•L^－1)以及在阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)存在下的反应动力学, 获得了不同CTAB浓度下该复杂反应的表观动力学参数k₁、k₂和k_－1.研究结果表明,表面活性剂CTAB单体分子对反应参数k_－1影响不大, 但却能催化第一步正向反应使k₁变大,而使k₂减小; 在临界胶束浓度cmc附近k₁达到最大值,随后又降低；低浓度胶束对k_-1影响不大,而使k₂增大；高浓度胶束则使k_-1增大而使k₂减小. 低浓度CTAB胶束对的活性影响不大, 而高浓度CTAB胶束将较显著地促进的歧化过程, 减缓的氧化过程. 胶束的静电效应、疏水效应和局部浓聚效应是影响上述反应的重要因素.     

溴化十六烷基三甲基铵增敏光度法测定定影废液中的银

在pH=6.86时,Ag+与二甲酚橙(XO)、表面活性剂溴化十六烷基三甲基铵(CTMAB)发生显色反应,Ag+-XO-CTMAB三元配合物的最大吸收波长为594nm,表观摩尔吸光系数为2.08×106L/(mol·cm),Ag+含量在0.0～50.0μg/(25mL)内服从比耳定律。将该法用于定影废液中微量Ag+的测定,回收率为96.7%～100.8%。     

New Amphiphilic Polypyridyl Ruthenium（Ⅱ） Sensitizer and Its Application in Dye-Sensitized Solar Cells

Amphiphilic polypyridyl mthenium（Ⅱ） complex cis-di（isothiocyanato）（4,4＇-di-tert-butyl-2,2＇-bipyridyl）（4,4＇- dicarboxy-2,2＇-bipyridyl）ruthenium（Ⅱ）（K005） has been synthesized and characterized by cyclic voltammetry, ^1H NMR, UV-Vis, and FT-IR spectroscopies. The sensitizer sensitizes TiO2 over a notably broad spectral range due to its intense metal-to-ligand charge-transfer （MLCT） bands at 537 and 418 nm. The photophysical and photochemical studies of K005 were contrasted with those of cis-Ru（dcbpy）2（NCS）2, known as the N3 dye, and the amphiphilic ruthenium（Ⅱ） dye Z907. A reversible couple at E1/2=0.725 V vs. saturated calomel electrode （SCE） with a separation of 0.08 V between the anodic and cathodic peaks, was observed due to the Ru^Ⅱ/Ⅲ couple by cyclic voltammetry. Furthermore, this amphiphilic ruthenium complex was successfully used as sensitizers for dye-sensitized solar cells with the efficiency of 3.72% at the 100 mW·cm^-2 irradiance of air mass 1.5 simulated sunlight without optimization of TiO2 films and the electrolyte.     

月桂酸毛细管胶束电动色谱-质谱测定农田水中的三嗪类农药

基于月桂酸可以直接进入电喷雾电离源,且对三嗪类农药在电喷雾电离源的电离强度没有明显的影响,建立了以月桂酸为表面活性剂的毛细管胶束电动色谱-电喷雾质谱联用(MEKC-ESIMS)同时测定8种三嗪类农药的新方法。在以40 mmol/L月桂酸和140 mmol/L氨水作为缓冲溶液、70%的异丙醇(含3.0mmol/L的醋酸铵)作为鞘液的条件下,各组分分离良好;结合固相萃取(SPE)技术对农田水样进行测定,各组分检出限为0.040~0.10μg/L;回收率在87.2%~97.3%之间。     

Focused microwave-assisted micellar extraction combined with solid-phase microextraction--gas chromatography/mass spectrometry to determine chlorophenols in wood samples

This work describes the utilization of the focused microwave-assisted micellar extraction in combination with the solid-phase microextraction (SPME) to determine chlorophenols in wood samples. The influence of the nature of the surfactant in the extraction process, the optimization of the variables of the focused-microwave system, and the effect of the ageing time of the samples in the extraction efficiency of the method, have been assessed in this study. The overall method using the non-ionic surfactant POLE as extracting medium allows us to determine chlorophenols in wood samples achieving an average extraction efficiency of 104.1%, limits of detection ranging from 2 to 120 ng g⁻¹, and intermediate precision values ranging between 3.5 and 13.2%. The proposed method is also characterized by short analysis times (around 5 min for the microwaves extraction step) and by avoiding the use of organic solvents.     

胶束荧光法测定维生素B_2含量

维生素B_2(核黄素)为人体内黄酶类辅基的组成部分,参与人体内的生物氧化作用。药典规定其含量测定用分光光度法,文献报道有高效液相色谱法、荧光法等。但因维生素B_2(V_(B2))遇光易分解,尤其在碱性水溶液中,极易变质。其降解产物为感光黄素,二氢核黄素,光化色素等,因此给测定的准确度和灵敏度造成一定的麻烦,为了提     

Size of Micelles Determined by Static Fluorescence Quenching

We developed a new method to measure the average aggregation number of large rod-like micelles using static fluorescence self-quenching of a solubilized fluorophore. The method is based on the increase of self-quenching of micelle-solubilized pyrene through excimer formation. We consider the effect of random distribution of pyrene in micelles and the micellar size distribution. The measured average aggregation <n> _M is based on a new M-weighted raging similar to our exponential-weighted averaging in the transient decay method. We apply this method to study the effect of a large concentration of salt on the average aggregation behavior of sodium dodecyl sulfate (SDS) and cetyle tetraammonium bromide (CTAB). The sizes increase with increasing ionic concentrations. For SDS, we used the thermodynamic model developed by Missel et al. to calculate < n > _M which we compare with experimental results.     

Preparation and characterization of gold nanoparticles and nanowires loaded into rod-shaped silica by a one-step procedure

Rod-shaped mesoporous silica nanoparticles (RMSN) with built-in gold nanoparticles or thin gold nanowires in the pore channels were in situ synthesized via a one-step procedure. The insertion of a hydrophobic gold precursor into the mesopores of RMSN was reached through a micellar solubilization mechanism and gold nanoparticles were achieved through a thermal reduction. The resulting RMSN and Au-RMSN samples were characterized by using X-ray diffraction, transmission and scanning microscopies (TEM and SEM), X-ray photoelectron spectroscopy (XPS), nitrogen physisorption and solid-state Nuclear Magnetic Resonance (NMR). The interaction of Au precursor (a carbene complex) with the thiol group at the silica surface was identified and found to play a crucial role in the dispersion of the uniform metal nanoparticles at the internal surface of RMSN. Moreover, TEM micrographs revealed the absence of large gold particles outside the mesopore network. The shape of Au nanoparticles and their loading amount in the mesoporous silica could be easily tuned by altering the concentration of gold precursor.