非平衡溶剂化新理论在有机染料电子光谱中的应用

总结了非平衡溶剂化新理论和在量子化学软件Q-Chem中基于含时密度泛函理论(TD-DFT)实现溶剂效应下计算电子吸收和发射光谱的数值解方法.采用该方法计算了染料敏化太阳能电池(DSSCs)中三苯胺型有机染料■在真空和乙腈溶剂中的电子结构与光谱性质,研究发现,π共轭桥上碳碳双键的个数和溶剂效应会促进光电转换.     

Preparation and characterization of gold nanoparticles and nanowires loaded into rod-shaped silica by a one-step procedure

Rod-shaped mesoporous silica nanoparticles (RMSN) with built-in gold nanoparticles or thin gold nanowires in the pore channels were in situ synthesized via a one-step procedure. The insertion of a hydrophobic gold precursor into the mesopores of RMSN was reached through a micellar solubilization mechanism and gold nanoparticles were achieved through a thermal reduction. The resulting RMSN and Au-RMSN samples were characterized by using X-ray diffraction, transmission and scanning microscopies (TEM and SEM), X-ray photoelectron spectroscopy (XPS), nitrogen physisorption and solid-state Nuclear Magnetic Resonance (NMR). The interaction of Au precursor (a carbene complex) with the thiol group at the silica surface was identified and found to play a crucial role in the dispersion of the uniform metal nanoparticles at the internal surface of RMSN. Moreover, TEM micrographs revealed the absence of large gold particles outside the mesopore network. The shape of Au nanoparticles and their loading amount in the mesoporous silica could be easily tuned by altering the concentration of gold precursor.     

泽泻乙醇提取物的HPCE分离研究

采用高效毛细管电泳的胶束电动毛细管色谱的分离模式(MEKC),对泽泻的乙醇(95％)提取物进行分离研究。以十二烷基硫酸钠(SDS)胶束为准固定相．硼砂为缓冲体系,甲醇为有机添加剂,考察了SDS浓度、硼砂浓度、pH、甲醇用量、电泳电压、电泳温度等对分离的影响。结果表明：硼砂缓冲体系为运行缓冲溶液(pH：9．18～9．20)、硼砂浓度30mmoL／L、SDS浓度45mmol／L、甲醇体积分数30％,分离电压25kv、分离温度25℃时分离效果最好。在此条件下,得到分离度和重现性均较好的泽泻乙醇提取物的HPCE色谱图。     

用胶束电动毛细管色谱法测定海洋沉积物中苯系物

海洋沉积物中苯系物的分析和测量对海洋石油化探具有重要意义。作者用胶束电动毛细管色谱法对海洋沉积物中苯系物进行了测定。考察了十二烷基硫酸钠 (SDS)的浓度和有机添加剂对分离的影响以及影响峰面积重现性和迁移时间的因素。苯系物的浓度和对应的峰面积成良好的线性关系。将该法用来分析石油勘探远景区域海洋沉积物中的苯系物 ,得到了它们的含量范围。     

胶束液相色谱／安培电化学检测尿样中的扑热息痛及4－氨基苯酚

用胶束液相色谱／安培检测器检测尿样中的扑热息痛及其主要水解产物４－氨基苯酚。采用１４．５μｍ的碳纤维电极作为工作电极，以高于临界胶束浓度的阴离子表面活性剂十二烷基磺酸钠（ＳＤＳ）作为液相色谱的流动相，尿样直接进样分析，扑热息痛和４－氨基苯酚的检测限分别为０．１３ｎｍｏｌ／Ｌ及０．７３ｎｍｏｌ／Ｌ（Ｓ／Ｎ＝２）。     

非离子表面活性剂存在下流动注射催化光度法测定痕量硒 Ⅱ.有关机理的探讨

本文研究了上文提出催化光度测定硒的有关机理。非离子表面活性剂(NSF)对硒催化S~(2-)还原亚甲基蓝(MB)退色产生胶束催化作用。首先,MB与NSF形成带阳电的混合胶束(NSF-MB)。在此,MB增溶于NSF胶束的栅状层和聚氧乙烯外壳,然后,〔S…Se°〕~(2-)被吸附于此混合胶束的界面。由于增溶和吸附的双重富集作用,使胶束界面反应物的浓度大大提高,从而促进了反应速率。反应速度增加的大小,决定于形成NSF-MB混合胶束的难易(这又决定于NSF的憎水基的结构)及〔S…S°〕~(2-)和〔S…Se°〕~(2-)在此混合胶束界面吸附能力的大小。     

溴化十六烷基三甲基铵增敏光度法测定定影废液中的银

在pH=6.86时,Ag+与二甲酚橙(XO)、表面活性剂溴化十六烷基三甲基铵(CTMAB)发生显色反应,Ag+-XO-CTMAB三元配合物的最大吸收波长为594nm,表观摩尔吸光系数为2.08×106L/(mol·cm),Ag+含量在0.0～50.0μg/(25mL)内服从比耳定律。将该法用于定影废液中微量Ag+的测定,回收率为96.7%～100.8%。     

Synthesis and Characterization of Heteroleptic Ru(II) Complexes Based on 4,4′‐Bis((E)‐styryl)‐2,2′‐bipyridine as Ancillary Ligand and Application for Dye‐Sensitized Solar Cells

Heteroleptic Ru(II) complexes were designed based on 4,4′‐bis((E)‐styryl)‐2,2′‐bipyridine (bsbpy) as an ancillary ligand for dye‐sensitized solar cells (DSSCs), and those Ru(II) sensitizers, [Ru(L)(bsbpy)(NCS)₂][TBA] (TBA; tetrabutylammonium), were synthesized according to a typical one‐pot reaction of [RuCl₂(p‐cymene)]₂ with the corresponding anchoring ligands (where L = 4,4′‐dicarboxy‐2,2′‐bipyridine (dcbpy), 4,4′‐bis((E)‐carboxyvinyl)‐2,2′‐bipyridine (dcvbpy), 4,7‐dicarboxy‐1,10‐phenanthroline (dcphen), or 4,7‐bis((E)‐carboxyvinyl)‐1,10‐phenanthroline (dcvphen)). The new Ru(II) dyes, [Ru(L)(bsbpy)(NCS)₂][TBA] that incorporated vinyl spacer(s) into ancillary and/or anchoring ligand displayed red‐shifted bands over the overall UV/VIS region relative to the absorption spectra of N719 . A combination of bsbpy ancillary and dcphen anchoring ligand showed the best result for the overall power conversion efficiency (η); i.e., a DSSC fabricated with [Ru(dcphen)(bsbpy)(NCS)₂][TBA] exhibited a power conversion efficiency (η) of 2.98% (compare to N719 , 4.82%).     

Exploring the relevance of thiophene rings as bridge unit in acceptor‐bridge‐donor dyes on self‐aggregation and performance in DSSCs

The possibility of dye charge recombination in DSSCs remains a challenge for the field. This consists of: (a) back‐transfer from the TiO₂ to the oxidized dye and (b) intermolecular electron transfer between dyes. The latter is attributed to dye aggregation due to dimeric conformations. This leads to poor electron injection which decreases the photocurrent conversion efficiency. Most organic sensitizers are characterized by an Acceptor‐Bridge‐Donor ( A ‐Bridge‐ D ) arrangement that is commonly employed to provide charge separation and, therefore, lowering the unwanted back‐transfer. Here, we address the intermolecular electron transfer by studying the dimerization and photovoltaic performance of a group of A ‐Bridge‐ D structured dyes. Specifically, eight famous sulfur containing π‐bridges were analyzed ( A and D remained fixed). Through quantum mechanical and molecular dynamics approaches, it was found that the formation of weakly stabilized dimers is allowed. The dyes with covalently bonded and fused thiophene rings as Bridges, 6d and 7d as well as 8d with a fluorene, would present high aggregation and, therefore, high probability of recombination processes. Conversely, using TiO₂ cluster and surface models, delineated the shortest bridges to improve the adsorption energy and the stability of the system. Finally, the elongation of the bridge up to 2 and 3 units and their photovoltaic parameters were studied. These results showed that all the sensitizers are able to provide similar photocurrent outcomes, regardless of whether the bridge is elongated. © 2017 Wiley Periodicals, Inc.