胶束体系中曲克芦丁的荧光特性及其分析应用

对曲克芦丁在胶束体系中的荧光性质进行了研究。实验发现在NaAc-HAc缓冲体系中,曲克芦丁自身具有较弱的内源性荧光,加入适量的表面活性剂十二烷基苯磺酸钠-6(SDBS-6),可使曲克芦丁与SDBS-6形成胶束配合物,体系微环境发生改变,使荧光发射强度显著增强,荧光增强程度与曲克芦丁的含量在一定范围内呈良好的线性关系。据此提出了基于SDBS-6增敏胶束荧光光谱法测定微量曲克芦丁的新方法。对测定条件进行了详细研究,结果表明： 在pH 5.53的NaAc-HAc缓冲体系中,当最大激发波长λex=350.0 nm,最大发射波长λ_em=456.3 nm时,方法线性范围为1.6×10-6 mol·L-1～8.0×10-10 mol·L-1,检出限1.1×10-10 mol·L-1,相对标准偏差为1.7%(n=11,c=6.0×10-7 mol·L-1)。方法用于片剂和注射液中曲克芦丁的测定,回收率为98.5%～100.4%,结果令人满意。     

Micellar and microemulsion electrokinetic chromatography of hop bitter acids

The elution order of the hop α- and β-acids has been studied under different modes of electrokinetic separation. A model is advanced to explain the shorter migration times of the more hydrophobic β-acids compared to the α-acids in micellar electrokinetic chromatography (MEKC). For quality control of the bitter principles in hops, the ruggedness of electrokinetic separation could be improved by replacing MEKC by microemulsion electrokinetic chromatography (MEEKC).     

几种核苷的毛细管胶束电动色谱分离

在胶束电动色谱模式下,考察了影响核苷分离的缓冲溶液、SDS浓度、pH、表面活性剂、有机添加剂、分离温度及外加电压等重要因素,并优化了关键的分离条件,建立了一种简单快速的利用毛细管胶束电动色谱DAD检测器分离分析核苷的新方法。当缓冲溶液为36 mmol/L硼酸缓冲液(pH 9.0)、30 mmol/L SDS和3%(V/V)乙腈,分离电压为25 kV和分离温度为25℃时,5种核苷在6 m in内实现了令人满意的基线分离。在优化的条件下,对其线性范围、检出限和重现性进行了测定。结果表明,核苷的迁移时间的重现性<1%;面积的重现性<3%。所建立的分离方法的线性范围宽,检出限低,重现性好。     

稀土-二甲酚橙络合物的胶束液相色谱分离与测定

本文应用一种新的高效液相色谱-胶束液相色谱法,在Shim-Pack CLC-ODS(150mm×6.0mm)色谱柱上,用含1.6×10~(-2)mol/L的CTMAB和pH=7.40的三-(羟甲基)-氨基甲烷缓冲液的甲醇/水(5:95)作流动相,对15种稀土元素-二甲盼橙络合物进行分离,取得了较满意的结果。     

疏水条件下甾体化合物的分离及环糊精的作用

分别应用胶束电动毛细管色谱法（ＭＥＣＣ）、反相色谱法和串联柱ＨＰＬＣ法分离 左旋十八甲基炔诺酮（ＬＮＧ）、睾酮（Ｔ）、孕酮（Ｐ－雌二醇（Ｅ２）等甾体化合物ＭＥＣＣ分离在未涂层毛细管柱上进行。当电泳缓冲溶液为含２０ｍｍｏｌ／Ｌ的２,６－二甲基－β环糊精（（ＤＭ－β－ＣＤ）添加剂和５０ｍｍｏｌ／Ｌ的十二烷基硫酸钠（ＳＤＳ）的１０ｍｍｏ／Ｌ四硼酸钠（ＰＨ９．２）时,可实现快速分离。通过与反相色谱法和串联     

胶束电动色谱法分离与测定己烯雌酚片剂中的有效成分

建立了一种用来分离测定己烯雌酚的胶束电动色谱法,。通过对十二烷基硫酸钠、胆酸钠、脱氧胆酸钠3种表面活性剂进行比较,选定以60mmol/LSDS 10mmol/L硼砂的水溶液作为背景电解质溶液,研究了不同pH对分离己烯雌酚的影响。该方法被应用于测定己烯雌酚片剂中有效成分的含量。     

Pluronic嵌段共聚物F127和P123胶束对萘、蒽、芘的增溶

35℃时F127和P123在ccm后可生成内核PO成分分别为92.7%和94.5%的胶束,后者胶束内核体积为前者的2.8倍.稠环芳烃和空胶束的第一步缔合平衡常数K₁值均随萘、蒽、芘顺序逐渐增大.萘、蒽、芘在每个F127和P123胶束中的增溶量均随胶束内核体积增大而线性增加,每个PO基团对应的增溶量比十二烷基磺酸胶束内核中相同体积对应的增溶量约大近2倍.Pluronic胶束除与稠环芳烃间具有强相互作用力外,所形成的大内核是导致大增溶量的重要因素.     

Comparison of analytical methods for the quality control of a new formulation containing soy extract and melatonin

Three analytical methods have been developed and compared for the quality control of a new formulation (Soymen GN(R) capsules) containing soy extract and melatonin for the treatment of menopausal symptoms. The first method is based on MEKC with diode-array detection, using a mixture of basic carbonate buffer (95%) and methanol (5%), containing 55 mM SDS, as the BGE. The second method is an HPLC method with UV detection at 260 nm. The third method is an HPLC method coupled to amperometric detection which is carried out at an oxidation potential of +0.8 V. In both HPLC systems, the chromatographic separation is obtained on an RP C18 column using a mixture of ACN and an acidic phosphate buffer (25:75 v/v) as the mobile phase. A feasible pretreatment procedure with a methanol/water mixture has been implemented to achieve the quantitative extraction of the main soy isoflavones and of melatonin from the capsules. The results obtained with the three methods are in good agreement with each other and satisfactory in terms of linearity (r(2) >0.9996), precision (RSD <5.4%) and accuracy (recovery >97%). Thus, each of the three analytical methods seems to be suitable for the simultaneous analysis of the main soy isoflavones and melatonin in the new commercial formulation.     

胶束液相色谱法测定制剂和尿样中布洛芬

采用胶束液相色谱法分离和测定制剂和尿样中布洛芬,考察了表面活性剂的种类及浓度、柱温、流动相pH值,流速对布洛芬色谱保留行为的影响,探讨并提出了布洛芬在吐温-80为非离子表面活性剂的胶束液相色谱中的色谱保留模型。以ZORBAXExtend-C18色谱柱(4.6mm×250mm,5μm),20mmol.L-1吐温-80和25mmol.L-1磷酸氢二钾(pH7.8)混合溶液为流动相,在263nm处进行测定,布洛芬的保留时间为5.8min。布洛芬的质量浓度在0.2～1.0g.L-1范围内呈线性关系,检出限(3S/N)为1.1ng,平均回收率达98.3%～102.1%。     

Instabilities of micellar systems under homogeneous and non-homogeneous flow conditions

The rheological behavior of a cetylpyridinium chloride 100 mmol l^–1/sodium salicylate 60 mmol l^–1 aqueous solution was studied in this work under homogeneous (cone and plate) and non-homogeneous flow conditions (vane-bob and capillary rheometers), respectively. Instabilities consistent with non-monotonic flow curves were observed in all cases and the solution exhibited similar behavior under the different flow conditions. Hysteresis and the sigmoidal flow curve suggested as characteristic of systems that show constitutive instabilities were observed when running cycles of increasing and decreasing stress or shear rate, respectively. This information, together with a detailed determination of steady states at shear stresses close to the onset of the instabilities, allowed one to show unequivocally that "top and bottom jumping" are the mechanisms to trigger the instabilities in this micellar system. It is shown in addition that there is not a true plateau region in between the "top and bottom jumping". Finally, the flow behavior beyond the upturn seemed to be unstable and was found accompanied by an apparent violation of the no-slip boundary condition.