Micellar effect on the electron transfer reaction of chromium(V) ion with organic sulfides

The rate of electron transfer from organic sulfides to [Cr^V(ehba)₂]⁻ (ehba-2-ethyl-2-hydroxy butyric acid) decreases with a decrease in the polarity of the medium. The anionic surfactant, SDS and the cationic surfactant, CTAB have different effects on the kinetics of this reaction. The micellar inhibition observed in the presence of SDS is probably due to the decrease in the polarity and the electrostatic repulsion faced by the anionic oxidant from the anionic micelle and the partition of the hydrophobic substrate between the aqueous and micellar phases. The micellar catalysis in the presence of CTAB is attributed to the increase in the concentration of both reactants in the micellar phase. This micellar catalysis is observed to offset the retarding effects of the less polar micellar medium and the unfavorable charge-charge interaction between the + charge developed on S center in the transition state and the cationic micelle. This catalysis is contrary to the enormous micellar inhibition observed with IO₄⁻, HSO₅⁻ and HCO₄⁻ oxidation of organic sulfides.     

Chiral separation of trimetoquinol hydrochloride and related compounds by micellar electrokinetic chromatography using sodium taurodeoxycholate solutions and application to optical purity determination

The chiral separation of trimetoquinol hydrochloride, which is a bronchodilator (Inolin), and three related compounds by micellar electrokinetic chromatography was investigated using a bile salt as a chiral surfactant. Enantiomers of these compounds, except laudanosoline, were successfully separated within 12 min using a separation tube of effective length 500 mm × 0.05 rum i.d. and a 0.05 M sodium taurodeoxycholate solution of pH 7.0. The observed theoretical plate numbers of the peaks were ca. 150000. Chiral recognition was affected by the structure of bile salts, the pH of the buffer solutions used and the structure of the solutes. Of four kinds of bile salts, successful chiral separation was achieved only using sodium taurodeoxycholate solution under neutral conditions. The method was applied to the optical purity determination of trimetoquinol hydrochloride. The effects of surfactant concentrations and some additives to the micellar solution are briefly described.     

Effects of citrate on the composition and enzymic coagulation of colloidal bovine casein aggregates

Colloidal casein aggregates (CCA) prepared from soluble whole bovine caseinates in the presence of Ca²⁺ and phosphate (Pi) ions by addition of different citrate (Cit) concentrations showed different mineral and proteic composition. Citrate concentration conditions the Ca and Pi concentrations incorporated into CCA, probably due to the complexing effect of this anion on calcium. A significant change in the incorporated Ca/Pi ratio at 8 mM citrate could very likely be associated to changes in CCA net charge. The incorporation of individual caseins to the colloidal particles obtained, as well as their average size and size distribution, depended also on the Cit concentration used [Cit]_P. α_S- and β-caseins assembled in the CCA structure sharply decreased at a [Cit]_P higher than 15 mM, i.e., at a low Ca²⁺ concentration in the aggregates, showing that the presence of this cation is necessary for the incorporation of these caseins. An inverse relationship between the aggregation step rate in CCA enzymic coagulation and their average size was observed. The aggregation rate vs the average size curve obtained at [Cit]_P 8 mM clearly differed from the curves obtained at 10 and 12 mM, respectively, a fact probably related to a change in the CCA net charge. This behavior showed the effect of citrate concentration on CCA functional properties.     

Study of high-performance liquid chromatographic separation of selected herbicides by hydro-methanolic and micellar liquid chromatography using Genapol X-080 non-ionic surfactant as mobile phase constituent

Chromatographic behaviour of six selected herbicides (chlortoluron, metoxuron, chloridazon, simazine, propazine and atrazine) was studied by reversed-phase (RP) high-performance liquid chromatography (HPLC) containing Genapol X-080 non-ionic surfactant as methanol/water mobile phase constituent. The concentration of methanol was changed from 50 to 0% (v/v) for constant 2% (v/v) concentration of the surfactant. The surfactant concentration in purely aqueous micellar mobile phase varied from 1 to 5% (v/v) what is approximately 360-1800 times above the CMC. Within this concentration range Genapol X-080 proves concentration dependent selectivity changes for chlortoluron/atrazine critical pair not occurred in hydro-methanolic mobile phases. Further studies revealed that this chromatographic system offers high compatibility with cloud-point extraction environmental sample pretreatment approaches using Genapol X-080 for the purpose, too.     

X-H (X = C, N, O, Si, P, S) 键离解能计算的密度泛函方法研究

使用了不同密度泛函方法计算X-H (X = C, N, O, Si, P, S) 键离解能，并分析不同密度泛函方法的计算精度。研究发现大多数密度泛函方法包括B3LYP, B3P86, B3PW91, G96LYP, PBE1PBE，和BH&HLYP都明显低估键离解能13-25 kJ/mol。该现象与是否使用无限基组无关，因为即使使用无限基组键离解能仍然被低估。因此密度泛函方法不适合用于键离解能的估算。其中B3P86方法的偏差最小。进一步分析表明，使用限制性开壳层计算并无任何优势，在大多数情况下非限制性开壳层计算实际上比限制性开壳层计算要好。最后，我们发现了密度泛函方法对键离解能的低估是系统的，因此建议利用校准后的UDFT/6-311++G(d, p)方法计算化学键离解能。     

周期性密度泛函理论研究氯气在CuCl(111)表面上的吸附与解离

运用广义梯度密度泛函理论(Generalized Gradient Approximation，GGA)的PBE(Perdew-Burke-Ernzerh)方法结合周期性平板模型，研究了氯气分子和氯原子在CuCl(111)表面上的吸附。通过对不同吸附位和不同单层覆盖度下的吸附能和几何构型参数的计算和比较发现：氯气分子在CuCl(111)表面的吸附为解离吸附；单层覆盖度为0.50时的吸附构型为稳定的吸附构型；氯气分子平行吸附在CuCl(111)表面时最稳定，吸附能最大，达364.5 kJ·mol^-1；伸缩振动频率的计算结果表明，吸附后的氯气分子的伸缩振动频率与自由氯气分子的伸缩振动频率相比，都发生了红移；布居分析结果表明整个吸附体系发生了由Cu原子向氯气分子的电荷转移。氯原子吸附的计算结果显示氯原子以穴位稳定的吸附在CuCl(111)表面。     

Synthesis of conducting polyaniline using novel anionic Gemini surfactant as micellar stabilizer

The Gemini surfactant 9B-4-9B containing sodium sulfonate as hydrophilic head group was synthesized based on nonylphenol and characterized by FTIR, ¹H NMR spectroscopy and the surface tension measurement. The CMC and C₂₀ of the 9B-4-9B were smaller than that of sodium dodecylbenzene sulfonate and sodium dodecylsulfate, respectively, indicating excellent efficiency of micelle formation and reduced surface tension. Conducting polyaniline salts were synthesized by chemical oxidative micellar polymerization of aniline in water firstly using Gemini surfactant 9B-4-9B as the micelle stabilizer and ammonium peroxydisulfate as the oxidant at 0 °C. The stable polyaniline dispersions have been obtained when the molar ratio of the 9B-4-9B to aniline was equal to or above 0.5 used in the polymerization system. The obtained granular polyaniline particles with the size of 1-2 μm were characterized by FTIR, UV-Vis, SEM, WAXD and conductivity measurement.     

Ab initio MO study of potential energy surface of NH2 with CN reaction

An extensive quantum chemical study of the potential energy surfaces (PES) for the association reaction of NH₂ with CN and the subsequent isomerization and dissociation reactions has been carried out using density functional theory (DFT)/B3LYP/6‐311++G(3df,2p) level of theory on both singlet and triplet states. The reaction mechanism on the triplet surface is more complicated than that on the singlet surface. A total of 19 isomers and 46 transition states have been identified and characterized on the triplet PES. Among them, IM2 (IM2a), IM3 (IM3a, IM3b), and IM10 are the lowest‐lying isomers with thermodynamic stability. Twenty available dissociation channels, depending on the different initial isomers, have been identified. On the singlet surface, only 12 isomers and 16 transition states have been found, and among them IM1(S) and IM2(S) are the lowest‐lying isomers. The higher isomerization and dissociation barriers on the singlet surface indicate that the addition and the subsequent reactions of NH₂+CN are most likely to occur on the triplet PES because of the lower barriers. A prediction can be made for the possible mechanism explaining the production of H+HNCN. Besides HNCN, other major products are NH+HCN and NH+HNC, which are produced by direct dissociation reactions from triplet IM2 and IM3, respectively. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2006     

Chemical mass shifts in resonance ejection experiments in the quadrupole ion trap

Chemical mass shifts were measured in a Paul ion trap operated in the mass-selective instability scan with resonance ejection using a custom-built instrument. These shifts, which can be as much as 2%, decrease with increasing endcap electrode separation owing to changes in the higher order contributions to the electric field. They also decrease with decreasing helium buffer gas pressure. Both of these effects are analogous to those found with boundary ejection. This suggests that the previously proposed chemical mass shift mechanism based on compound-dependent collisional modification of the ejection delay produced by field faults near the endcap electrode apertures holds true also for resonance ejection. The influence of the resonance frequency on chemical mass shifts was also investigated and it is shown that at certain working points (values of the Mathieu parameter q(z) and a(z)) non-linear resonances greatly reduce the ejection delay for all ions, regardless of their chemical structures, and thus reduce the magnitude of the chemical mass shift. Energetic collisions leading to dissociation can take place at an earlier stage during the ejection process in the mass analysis scan when using resonance ejection compared with boundary ejection. This leads to even larger chemical mass shifts of fragile ions in resonance ejection. Increasing the resonance voltage amplitude can enhance this effect. The chemical mass shifts of fragile ions increase with increase in the resonance voltage amplitude, whereas negligible changes occur for structurally stable ions.     

Agreement between experiment and hybrid DFT calculations for O--H bond dissociation enthalpies in manganese complexes

Information on the accuracy of DFT functionals for redox reactions in transition metal systems is rather limited. To analyze the performance of some popular functionals for redox reactions in manganese systems, calculated O--H bond dissociation enthalpies for Mn-ligands in six different complexes are compared to experimental results. In this benchmark, B3LYP performs well with a mean absolute error of 3.0 kcal/mol. B98 gives similar results to B3LYP (error of 3.8 kcal/mol). B3LYP* gives lower O--H bond strengths than B3LYP and has a mean error of 5.0 kcal/mol. Compared to B98 and B3LYP, B3LYP* has an error trend for the manganese ligands that is more similar to the error for a free water molecule. The nonhybrid functional BLYP consistently and significantly underestimates the O--H bond strengths by approximately 20 kcal/mol. HCTH407 has a rather large mean error of 9.4 kcal/mol and shows no consistent trend. The results support the use of hybrid functionals and the present computational method for large model systems containing manganese. An example is the oxygen evolving complex in photosystem II where hybrid functionals predict the appearance of a Mn(IV)-oxyl radical before the O--O bond formation step.